32 Rundlls has stopped working
I get error messages on my computer, the more insistent one indicating that Rundlls32 has stopped working. I am running Windows Vista Home Premium. How can I fix this problem?
Hello
1. when exactly you get the error message?
2 are you faced with any show related to problems with the computer?
3 did you a recent software or changes to the material on the computer?
I suggest you to run Event Viewer to check the exact error message.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
Method 1:
I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.
Click on the link mentioned below for further guidance on the scanning of the file system Checker
http://support.Microsoft.com/kb/929833
Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.
If the issue is not resolved, then I suggest you to start the computer in a clean boot state, and check if that helps.
Method 2:
This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.
See also:
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685
Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
Hope this helps and keep us posted.
Tags: Windows
Similar Questions
-
Yes, this box just came and said that. I don't know what to do.
Hi Angela,.
Thanks for the reply.
Have you found the file that generated the error message?
I suggest you to uninstall the application of pricing file from your computer, this will help you to correct the error.
Uninstall or change a program http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program
I hope this helps.
-
When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it? My mouse is out of control! :)
* original title - why windows will not host rundll.exe I would change my settings of the mouse? *
Hello
If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
Wireless and so on.=================================================================
To solve the problems:
If your: Windows host process Rundll32 has stopped working
http://www.WinVistaClub.com/T40.htmlWhat is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right
Click on taskbar - task manager - take a look at stored by - Services - process -.
It's a quick reference (if you have a small box left - show for all users, then
Check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG then after a
a list of these here.
--------------------------------------------------------------------Tools that should help you:
Objects of process Explorer - free - find out what files, registry keys and other processes
have open, which DLLs they have loaded and more. This exceptionally effective utility will be
even show you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not.
The window Watcher says it all, every window created by all programs that are running, the statement
If the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
-
Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!
Hello
try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Stopped DVD/CD burner that is recognized by the operating system. Tried many solutions recommended without any positive result, although twice after a night at the stop "DVD/CD burner" showed in "Device Manager". When you try to run a computer started but locked DVD system requiring a total disconnection of power supply unit to restart.
To cause to seek randomly, I opened AXIS Media Control in the Panel and told me that the Rundll32 has stopped working. Attempted, requested by the repair window resulted in the message "data execution Preventer deactivated program to protect your computer.
Help
Although the situation may call for the purchase of an external, let's not jump to conclusions, yet. I looked back to see what book you will find no mention of the model. So, please indicate the full model number and operating system. Then, please explain what happened to give "DVD/CD burner stopped recognized by the operating system." If the DVD player went MIA, it may be something else that the drive has failed. Read this thread: http://h30434.www3.hp.com/t5/Desktop-CD-DVD/DVD-drive-stopped-working/m-p/593901#M2870
-
My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.
What version of OS X (or, if all goes well, Mac OS) are you running?
What version of iPhoto do you run?
iPhoto was not maintained or updated updated by Apple for about eighteen months. Photos taken app supported since that time.
-
Click force has stopped working
Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.
I have checked all the options, rebooted the system, still no clear sign of what is the problem.
Does anyone have the same problem? How to check weather force/pad touch works well?
Any suggestions what to do?
A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.
After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.
Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.
Possible only "close program"...
Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!
All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).
Checked the event viewer:
1. error message:
Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f
Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f
Exception code: 0xc0000005
Offset: 0x004f0e09
ID of the process failing: 0xcc4
Start time of application vulnerabilities: 0x01d218b3194e2f01
The failing application path: C:\Program Files\iTunes\iTunes.exe
Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll
Report ID: 68f80588-84a6-11e6-8df8-4851b741621f
2. Windows Error Reporting
Fault of type 1024926102, bucket 25
Event name: APPCRASH
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: iTunes.exe
P2: 12.5.1.21
P3: 57cfb09f
P4: WebKit.dll
P5: 7602.1050.4.5
P6: 57c11f7f
P7: c0000005
P8: 004f0e09
P9:
P10:
Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support
-
iMovie has stopped working since iOS 10
iMovie has stopped working since iOS 10
Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it
Hello iMovie does not work,
After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
I recommend you read these articles, there are a few things that we can try to get the application running again.Force an application to close on your iPhone, iPad or iPod touch - Apple Support
Restart your iPhone, iPad or iPod touch - Apple SupportThank you for using communities of Apple Support. Good day.
-
Error "iTunes has stopped working".
After update itunes to the latest version of 12.5.1.21, its does not and always give an error like "iTunes has stopped working". Even I tried to reinstall the same version and earlier versions of it. Always the same question.
Kindly resolve.
Bene-
Hello, this article could help you Fix unexpectedly closes or launch issues in iTunes for Windows - Apple Support
-
"Share" feature in the Finder (or other applications) has stopped working.
Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share." From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc. He used to work. Now it is not. In system preferences > Extensions all the sharing options are regularly controlled. The same problem occurs in other applications such as Photos. Selection of a photo and trying to "share." Nothing happens, the application crashes. Does anyone have a solution?
The Share button shows 'No. Service' or missing menu items?
https://support.Apple.com/en-us/HT203129
If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.
-
How to make the new version, I just installed as the old work that has stopped working?
I used Thunderbird for many years and have always been very satisfied.
A few days earlier, he has stopped working on my computer. I think that this was due to an update of AVG Free 2015. (When I restarted after the automatic update, Tbird and Chrome and Firefox broke everything. AVG has since been removed and replaced with Avast. Chrome and Firefox, both work very well after I installed the latest versions.) I took the opportunity to get the latest version of Tbird (I was 37) and installed it. TBird is OK, but the operation is a total disaster!
He used to see me just like the user. Now I have to choose my Inbox by clicking, and then open it in a new tab. I could accept this pain if things worked OK. The first email that I click appears in the message pane. But I can't delete it unless I double click to open in a new tab! I can not get the following message to be displayed in the messages pane. It's used to work if I simply clicked on the message.
How can I make Tbird work as he did? I used to love, now I hate it! Please help me before I dump Tbird and switch to Gmail!
Thanks for any help.
-jim
And it still works like that for me.
First define your default account
Account settings, mark your account, thoroughly open stock account and 'set as default '.To see how it works
-
When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.
There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.
-
FDM has stopped working with firefox
Free Download Manager has stopped working with firefox after I speedup firefox opening. (not after restart or update of firefox) Before that, I used FDM on firefox. I already try with restart firefox and follow-up of the implementation under the quiz "Windows Media or other plugins stopped working after Firefox update | Firefox Help", but none of them worked.
When you say after you speed up Firefox, do you mean you used the reset feature? You can tell because Firefox will create a new 'Old Firefox Data' folder on your desktop when you reset.
The Reset function deletes your extensions as part of the cleaning process. You probably need to reinstall FDM from its original source. Maybe the Addons site? https://addons.Mozilla.org/Firefox/
-
Download helper has stopped working on youtube today 08/08/2014
Add on download helper has stopped working on you tube - was working fine then stopped gray became colored icon.
And for the Mac, what other solution?
Maybe you are looking for
-
replaced fan needs, do not know if I have discrete graphics card or UMA, options include from the maintenance manual: Intended only for computers models graphics subsystems with memory UMA 603690-001 Only for the only with computer models equipped gr
-
\]I first started with an instant coffee called chat room. can you help me with this?
-
no error code just that mouse and touch pad on laptop does not work
My D610 delllatitude's cd-rom problems, so when I contacted dell they told me to delete some of the files in the registry and now with my new drive hard to 100 GB when the computer was delivered on the pointer is located in the Center or there abouts
-
E3200 and wireless MAC filter will not accept the recent MAC formats
When I go on the web interface for my Linksys E3200, Wireless > Wireless MAC Filter and try to add the MAC to my new laptop computer to work, the user interface returns an error which is the MAC address in the wrong format. I have triple checked the
-
setScene not declared in this scope
Im working on the c ++ here Navigation pane: https://developer.BlackBerry.com/Cascades/documentation/UI/navigation/multiple_screens_stack.html I get the error: setScene has not declared in this scope. Any ideas how to fix? With the help of beta3.