32Sii cannot be turned on

32Sii cannot be turned on even after installing new batteries. I had the same problem with my previous. How can I solve this problem?

Finally, I turned on the s 32 using the guideline at the stage of A - 4 3 of the manual.

Removed the battery

Insert a coin between the contacts for 30 seconds to ensure that the capacitors are discharged.

Re-installed the batteries

On the 32s and it worked

Tags: Notebooks

Similar Questions

  • Satellite R840 - 12 c: cannot manually turn off the WiFi function

    I recently bought a brand new Toshiba Satellite R840 - 12 c Notebook.
    The Wifi light is still "on" and the function key does not work, in other words cannot manually turn off the WiFi feature.

    Although the WiFi feature is still "on" I can't connect to wireless modem. "

    When I go to Device Manager I find conflicts in "other devices" for

    1. network controller
    2 PCI Simple Communications Controller
    3 unknown Device

    Tried updating drivers connecting via ethernet cable to the modem, but nothing helped.

    Can anyone help?

    Hello

    Have you installed the driver WLan?
    The laptop seems to be equipped with the Atheros AR9285 WiFi card and in most cases the Fn + F8 key does not work because the Wlan driver is not installed or is not working properly.

    Recommend first of all remove the network card wireless from Device Manager, then restart the laptop. After restarting again install the new driver Atheros Wlan downloaded for this wlan card.

    Here you can find all the drivers Wlan published by Toshiba:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

  • My windows Defender cannot be turned on. The error code is 0x800106ba. I did a full scan with no viruses or errors.

    Windows Defender (vista) cannot be turned on.  Errow code is 0x800106ba.  When I found this, I did the full scan by using the Microsoft Security Enssentials.  There is no virus or error appears.  What could be wrong?  Thanks for any help.

    MS Security Essentials, which apparently you have installed your anti-virus/security protection, has its own component antimalware and disables Windows Defender when it is installed correctly. If your system works as expected. MS - MVP - Elephant Boy computers - don't panic!

  • "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

    original title: Security Center

    I had a virus to infect my computer but I'm to remove by doing the scans. I can't solve the problem of after-sales service. "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

    Hello Barbaram1,

    Use the Windows key + R on the keyboard or click on start, select run.
    In the run box, type services.msc
    Click OK.

    Make sure that the Security Center service is enabled and started.
    Probably, you will need to click Start to start the service.
    The Startup Type should be automatic.  The status should be started.

    Let me know what happens. If the problem persists, it may be that there are residual questions of the malware infection.

    Councillor of State & progress.

    Maurice Naggar ~ MS - MVP

  • Wireless adapter cannot be turned on

    I have a HP Pavilion dv6-1245dx laptop. The operating system is Windows 7 Home premium upgrade from Vista, at the time where HP has offered the upgrade using as soon as Windows 7 is out. The laptop stopped booting and I had to do a complete reinstall of Vista family premium, then the upgrade to Windows 7. After that, I did a restore of Windows Image on an image recorded using the Windows backup file. The laptop seems to work normally now except for one thing. Now the electronic switch at the top of the keyboard for the wireless card will not work. This is the type of switch that works when you put a finger on it. The adapter is disabled and cannot be turned on. I tried the driver update - he said that the pilot was the last. A similar switch that enables or disables the audio to the speakers work properly. Can anyone help?

    Welcome to Clay.

    Try to run the driver quick launch button.

    In the section keyboard and mouse.

    Be sure to choose WIN7 32 or 64 bits.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3979380#N342

    REO

  • X200s WIFI cannot be turned on

    Friends, I have a x200s with 5350 wifi/wimax card.

    Yesterday I used the system update to update the wimax pilot. After the automatic installation, my wifi never worked until now. As you can see from the image below, I used FN + F5 and tried to turn the wifi "power on", however, he never responded to my click. Also, although the wifi does not work, or be marketed, seeing wifi seems to say that it works, see the photo.

    Link to photo

    I / ve tried to install, restall, wifi, wimax, the drivers default AC for windows/intel or system update. I even tried to reinstall the keyboard and Power Manager player shortcut, but never did success.

    If you can help me. Everything seems installed properly.

    And here's another picture. Essentially the diagnosis says windows windows cannot bind the modern wireless ip Protocol. However, I checked the Protocol. Everything wireless, internet related protocols were lit.

    Link to photo

    I know that probably reinstall the entire system is the best way to work with. However, without even trying, I hold the last option. Hope someone here can help me. Really appreciate.

    Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

    Thanks Suriya.

  • Adobe Flash cannot be turned on in Safari

    Hello, I have problems getting Adobe Flash Player in Safari. When I go on Safari - Preferences - security - configuration of the Plugin, the following is what I get. There is simply no way to turn it on. I can't click on the blue highlighted area at all.

    I tried uninstall and reinstall the thing and it changed nothing. My OS is 10.11.6 and I downloaded the latest version of Adobe Flash Player. Help would be much appreciated!

    Safari > Preferences > Security > Internet Plug-ins

    Select 'Allow Plug - ins'.

    Click on the button 'plugin settings '.

    In the sheet from the drop-down list, click inside the box next to "Adobe Flash Player" to enable Adobe Flash Player.

    Now Flash must be enabled.

    Click on the 'OK' button to close the worksheet menu drop-down.

  • User root cannot be turned on/off

    Hello, I am an inexperienced user of OS X, and I started looking on the privileges of the user for a while, just in case, for safety. And when I learned that all root user, I started tinkering on my MacBook, unusual activities as not to wake from sleep, sometimes running the fans at full speed at idle, useless speed even download when no activity going on in front of my computer, may be subject to a person who has had access to my mac back earlier that activated the user root and back to my mac remotely from the back then.
    So I tried to disable the root user, but I couldn't turn it off the screen or the directory utility with the command terminal dsenableroot - d. It just says: failed to disable the root user. `

    I need help on this problem. Thank you

    .. .but I couldn't turn it off the screen of the utility directory

    What were the exact steps that you did and what stopped you from neutralizing him?

    If you couldn't turn it off, because the menu item to disable showing 'enable', then the root user is not enabled.

  • How to fix my iphone 6 s more, which cannot be turned on

    Hello

    my iphone more than 6 s has suddenly turned off for I don't know the reason. the screen is black and the button becomes hot. I press it still sleep and wake-up button does not open, even I plug in charger again it does not at all.

    What should I do about it?

    I hope you could help.

    Thank you

    Mae

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact

  • Wireless antenna cannot be turned on (P10)

    I bought the wireless pci card PA3300U-2MPC card (Atheros AR5001X +) for my satellite p10 251 (Win XP Home). Using installation guides, I installed it with precaution, connected with black and white cables. Then installed the driver, after that the Atheros software. The result - the wireless connection does not work. Configfree software both Atheros bring the message "turn on the wireless switch", but the switch is in position "On". When I press Fn + F8, it's the same message.

    The device is compatible with my laptop, according to the ebay seller. I also found on the Internet a Toshiba-Schwitzerland pdf file, when it is shown, that this card is compatible with all mobile phones of P10.

    Does anyone have an idea, what the problem?

    Hi gav

    Is the map propely recognized and installed (Device Manager status)?

    Try using the ConfigFree tool. This network of application monitoring can give you information on potential connectivity problems. On the right side, you can find possible solutions.

    Good luck!

  • Satellite M100-165 cannot stop - turns on automatically after a few seconds

    Hello!

    I have the problem of identical or very similar to those described in the threads:
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]

    When I try to turn off my Satellite M100-165 ("shut down" in Windows or even by pressing the power button while I'm in BIOS) it lights up after a few seconds. It lights when it runs on batteries. She also doesn't appear when I press the button for 4 seconds.

    I tried to recover the system with the recovery CD (Windows XP Home). I also tried with Windows Vista. Always the same.

    In fact I have BIOS version 2.90 (updated from version 1.90, as far as I remember) but with an earlier version, the problem exists also.
    I think when I got the version of the BIOS before 1.90 this problem did not exist (but I don't remember this version number).

    Thank you for any suggestions.

    Hello

    It's a very unusual question and, for me, there is not just some explanation. It will be interesting to know what Toshiba experts say on this subject. Make a call and let us know what they say.

    The strange is that the same thing will happen with two different operating systems. I can't say for sure why this happens, but your laptop is a bit confusing and of course change the shutdown with restart. If it is result of BIOS update service people should know about it.

  • Wireless radio cannot be turned on

    Hi all!

    I have a laptop SL500 2746-FMG with Intel wi - fi card. A few weeks ago I noticed that a wi - fi connection gets too often (every 3-5 minutes). I checked the signal strength of my access point, but it was good (-30...-40dB) and another PC on a longer distance worked well.

    I tried to reinstall the drivers for the card, but after that procedure, the status of the radio is always disabled if the hardware switch is turned on, the led is green. When I try to power the device using the Fn + F5 window, nothing happens: the status is always off.

    I tried to reinstall the drivers several times, even delete driver manually and then put it back: Device Manager indicates that the device is functioning correctly, LED lights up green but status is always off

    What could be the reason? Appreciate for any help

    I think that Reinstall Access Connections means it should first be completely uninstalled. I don't see any other different actions of the first Council.
    Spent some time to recover from an August backup system drive - now everything works fine. It was quite difficult step, but nothing.
    I assumed that the cause of the problem was soft (updates from Lenovo are not excluded). So I strongly recommend you to do the regular backups of your system, just in case this kind of problems.
    Thanks, Maliha

  • Wireless network card cannot be turned on

    I have a Gateway t-6330u that I recently had to reformat the hard drive and when Vista was reinstalled the driver for the wireless network adapter was missing. I downloaded the correct driver for it, but now Windows fails to activate the wireless network card. The hardware switch is turned on, but in the windows Mobility Center, it won't let me turn on the wireless network card. I tried to repair it with the windows network diagnostics, but it is also unable to turn on wireless networks. Then he told me he tried a repair but the problem persists. After trying a few times he gives up and tells me to contact my network administrator. Anyone have any ideas?

    Hi adht450,

    This problem can occur because of an older version of the driver that you need to update.

    Click Start> type in Device Manager in the start search > expand NICs in Device Manager > right click of network card > click Properties> click on Driver tab > click on update drivers> click OK.

    You can view the following link to update the drivers:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    You may need to look into the security WPA and WPA2 keys, you will probably need to change this.

    For more information, you can consult the following link:
     
    http://social.answers.Microsoft.com/forums/en-us/w7network/thread/43f61a9c-069b-49AB-9F5B-f52ec2b1ef7e

    Hope this information is useful.

    Jeremy K

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Smartphones blackBerry "Radio Off" and cannot be turned on via 'manage connections '.

    Hey all, hoping someone has seen this before on the curve.  I ran downstairs to the power and the radio stops automatically, but now, no matter what I do that worked previously, (make a call/go in manage connections-"Turn on all connections") the radio does not turn on.

    Any ideas or advice before I commit to BlackBerrycide?

    Hi and welcome to the forums!

    Try to remove the battery when the phone is turned on,

    Let it down for a minute, then replace, leave the device completely restarts

    1-3 minutes, see if the problem comes back.

    Thank you

  • Redirects Web site and the Windows Security Center Service that cannot be turned on

    I have Windows 7, 64-bit and recently whenever I click on links such as google search I have continues to be redirect to randomly selected sites. Sometimes, I have to click on the link even 10 times just to connect, I wanted to see. In addition, I have a perpetual notification telling me the Windows Security Center Service is disabled and when I try to make it back, I get a message telling me that it cannot be started. Can someone tell me what is the problem and how to fix it?

    Hi Sir sniper,

    which web browser is installed on the computer?

    The question seems to be like a browser hijacking. I suggest you try the steps from the following links:

    What is the browser hijacking?
    http://www.Microsoft.com/security/resources/hijacking-WhatIs.aspx

    Difficulty to your browser hijacked webhttp://www.microsoft.com/security/pc-security/browser-hijacking.aspx

    Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

    Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

Maybe you are looking for