3390 HP no longer works on home network

Similar Questions

• OJP8500 is no longer on the home network

  Office Jet Pro 8500 A909 wireless

  All laptops household used the transparent way wireless until last week.  The printer indicates that it is on our home network.   Laptops and the HP diagnostic tool cannot see it on the network.  All the features of claim to be on the same network with the same security key.  Tried to re-creation of router, restore the factory settings on printer, wireless on the device Wizard and uninstall the printer.  Now I can't reinstall, same w / CD, because I don't use wireless.

  Ideas.  Help?

  Laptops - 2 w XP, 2 w / Windows 7.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will need to remove the printer in Control Panel > printers, then run 'Add a device' in the start menu > all programs > Hewlett-Packard folder

• XP Pro network suddenly no longer works

  I have a home network with XP Pro and Vista Home.  It worked perfectly Friday and today (Tuesday) it won't let me access the XP machine.  I get the message "Windows cannot access (computer\dir)" the Details section: error code: 0 x 80070005 access denied.

  I have not changed anything on each machine.  There are several users and the PC have some user accounts and passwords to different levels of access to different folders.  I am set up as an administrator with full rights to everything on the PC.  Both machines have all their updates installed including SP3 on the XP machine.  The two systems are configured with static IP addresses.

  The XP machine has no problem accessing the Vista machine.  I was able to run a backup of the Vista PC to the files on the XP machine, but I have one authentication information in the backup program.  Unfortunately, it is not possible to define credentials for windows logon in Vista Home.  I have tried everything I can think about the past 5 hours including cutting the XP firewall and change the folder of shared access to everyone.  Help!  Anything with that anyone can come would be very appreciated.  I thought that maybe I could get XP to request a user name and password but I can't seem to find anything on that is.  Thanks in advance.

  Hello
  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  All aspects should be checked, declaring that she "worked before" or incessant on"I didn't something ", is not a way to deal with current sharing problems.

  ----------------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  Can be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side; SxS) it lacks certain runtime components (Redistributable Package).

  See:

  • [908165/questions/908165] The URL is not valid and cannot be loaded

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• HP Deskjet 3830: Printer connected by wireless worked well until someone joined the home network - looking for password now!

  I created my HP Deskjet 3830 yesterday and it worked on wireless connection. At no time was I asked a network security key.

  A colleague joined today to the home network (yesterday I was myself), and requested a key security network - to my surprise I was so.

  I put my wireless network password, and he says that it is evil. I used HP Print and Scan doctor to confirm the password (I guess that's the same thing as a "security key" - it was OK, but I keep being told it's wrong.)

  It is porrible that it is because my setup yesterday wasn't network but without straight wire? Or want to say I'm wrong?

  Other: since yesterday I have not changed anything or even restarted.

  Reset the printer to the default network. Now plug it back to your routers SSID with password. Try now. If Direct wireless is enabled in the printer, turn it off.

• Networking adapters no longer work after the downgrade from windows 8 to 7

  Hi, I recently downgraded my laptop (g6-2228dx) Windows 8 for Windows 7 and my network maps no longer work, and windows Diagnostics says there is a problem with the drivers.  I checked the HP Support page for my computer model, but it has only drivers for windows 8.  I tried to install all the drivers, but none of them worked.  Any help?

  Hello:

  See if this card wireless driver works...

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  File name: sp63802.exe

  Ethernet: Download and install the second pilot on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Moved from home office computer. Try to connect to the home network. Working Group changed now it won't let me connect you to Windows. It is the search for field. What can I do now?

  My TI guy told me to do the following...

  go to my computer, and then click Properties. Then go in the name of the computer from a network to a working group. I entered the name of my working group. Then it tells me to restart so I did.

  Now when I try to get into windows that connect, when I enter the username and password he tells me to check and make sure that they are correct and check the field. It does give me an option to choose a domain.

  It's husband's computer and I need to run quickly. Any help would be appreciated.

  Note please. I am a novice user and that you will need as more detailed instructions you can give.

  Thank you

  Aimee Bushmaker

  Green Bay, WI

  BTW - Windows XP Professional is installed on the PC.

  Not good.

  When you remove a computer from a domain, and put in a workgroup, you must ensure that you have a local user account with administrative privileges created on the machine before removing the domain.  Maybe the built-in Administrator account will work, but in most domain environments, the default password [White] is replaced by a different password.  Microsoft has an article that deals with this:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  Your technician COMPUTER should have known this would be a problem.  If you are a novice user and you can not access the built-in Administrator account, then your best bet to get must return to the domain and have your guys IT re - join to the domain.  Make sure you have a local user with administrative privileges created before withdrawing again to the field.

  Note that you normally will not have to remove a computer from a domain to make it work in a home-networking environment (working group).  You should be able to connect using the credentials cached [field] and your home network must always be visible to you.

  HTH,
  JW

• brother MCF685 printer stop working with the home network. I did something wrong

  Have a brother MCF685CW up until a month ago was working fine on my network. All computers on my home network have been able to print on the printer.  I don't know if I was doing something by mistake or something is wrong, but it will not print from any computer on my network.  I need help

  Hi HSWV,

  · You receive an error message or error code when you try to print?

  · The computer is connected to the network with windows XP installed?

  See the links below: resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Error message appears after printing to a network printer: http://support.microsoft.com/kb/282833

• Home network not working not not because of 'ComputerName' not in the list of shared folders.

  My simple home network of 2 PCs with XP, SP3 and a Netgear WNDR3700 router was working fine. I changed ISP and now cannot get the home network to the top. Run the home networking on every PC wizard implements the internal IP of 192.168.1.1 for the router and 192.168.1.2 and 192.168.1.3 for 2 PCs. Shared folders and files appear to be configured correctly and successfully, I can ping the router and the other PC from each PC. After the Microsoft troubleshooting procedure, everything is good until I get to the stage where the "ComputerName" must appear in the list of shared folders in computer management, System Tools, shared folders, shares. All other devices and shared folders appear correctly on each PC. It is about the last step in troubleshooting, but I can't in front of her. What can I do? Or is the wrong thing? I'm almost to the point of thinking there is something in the registry (added with my ISP change process) that stop working. Help!

  In general, it is due to a firewall, in which case advice Jack will help.  In addition, there are a condition [rare] where the Type of a computer node becomes defined 'Counterparts' or 'P Pei' that will stop the communications between computers.  Bring up a command prompt (start-> Run-> "cmd") and enter the command:
  ipconfig/all
  If the 'Type of node' line presents itself as "Peer-Peer" or "Pp" or type "P", ("Broadcasting", "Mixed" and "Hybrids" are OK) then check out the following article:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  HTH,
  JW

• Home network works great, remote desktop will not connect.

  I have a Windows 7 laptop and a Vista laptop. They are connected to a secure wireless network. Both work very well as standalones. When I try to connect via Remote Desktop or connect with each other. My 7 is in a homegroup with a single name. My Vista is in a WORKING group with the same name. I can't connect either using remote desktop. Computer for both names are names of a single word, 'XXXXXX', not the format xxx.xxxxx.xxxx and I can't figure another way to their name. I spent 2 days serching various tech forums and tried what they suggested.

  Hello

  Homegroup is a unique feature of Win 7. It uses IPv6.

  As you connect to Vista you must configure Windows 7 to the home network.

  ------------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  ------------------
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• GROUP/Home Network STOPPED WORKING ONE WAY

  My HOME network/group has stopped working SINCE MY MOBILE to MY PC.

  It works fine from PC to laptop, it started unexpectedly a few weeks ago, to my knowledge nothing in computers but something must be blocking him.

  When you look at the map of the network it shows the PORTABLE DOUBLE LINE AS BREEZE LINES FOR ROUTER/SWITCH, and the rest of PC lines are SOLID.

  Someone has an idea?

  I have treid sooter of boredom, restoration, etc.

  Thank you

  ALRAY_974

  [Transferred from Internet Explorer]

  Hello

  Thanks for the reply.

  You can read these articles and check if that helps.

  Home group: http://windows.microsoft.com/en-us/windows7/products/features/homegroup

  Group home sweet home: http://windows.microsoft.com/en-us/windows7/help/home-sweet-homegroup-networking-the-easy-way

  Homegroup: frequently asked questions: http://windows.microsoft.com/en-us/windows7/homegroup-frequently-asked-questions

  Homegroup: recommended links: http://windows.microsoft.com/en-us/windows7/homegroup-recommended-links

  Thank you.

• I can connect to my home network, but all the other networks do not work...

  I can connect to my home network, but all the other networks do not work... Error window says:

  Windows could not connect to the (X)? network name?

  [Link] Solve problems

  [Link] Learn more about Internet connection problems

  I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...

  Windows 7

  Hello

   
  1. What network are you trying to connect to?
  2. You are not able to connect to the Internet?
  3. Are you able to connect to the other network with wired network?
   
  Try the methods provided and check.
   
  Method 1:
  Check out the link and follow the steps.
  What is network discovery?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery
   
  Method 2:
  Check out the link and run the troubleshooter.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3:
  Reset the TCP/IP and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
   
  Method 4:
  Check out the links and check out them.
  http://Windows.Microsoft.com/is-is/Windows7/cant-connect-to-a-network

  http://Windows.Microsoft.com/is-is/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Satellite M - PgUp PgDn, home and end keys no longer work

  All of a sudden these keys no longer work on the computer when I'm on the internet. They sometimes work in PDF files in Word, but otherwise, they do not work...

  Hello

  I agree with the user above. I think the keyboard needs to be replaced if certain keys n t work. The fact is that individual keys can t be bought, you can only buy the whole keyboard but it isn't so expensive.

  You can get a new keyboard to an authorized service provider. On the Toshiba page you can find a list where you can find an ASP.