3424 stack and LAG

Similar Questions

• Safari hangs and lags while watching the video on youtube

  While watching therapy Unbox videos, the video hangs and lags. What's weird, is that only Unbox GAL of video therapy and I have not had this problem with any other channel. Confused! Help!?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Conflict between Toshiba Bluetooth Stack and drawers of power on Tecra M5

  There seems to be a bug in TosBtShell.dll and hope this alert could get fixed in a future revision. Possibly it will save others the effort that it has cost me to track down the problem on my Tecra M5 new. I had to give up Toshiba Bluetooth Stack and now using XP SP2.

  When the Bluetooth Manager is running, TosBtShell.dll updates the element ' Bluetooth' beside ' send to ' in the context menu of files and folders. Unfortunately it is in conflict with the shell software improvement Power drawers http://www.dynamickarma.com/powerdrawers.htm that I defer to speed up access to my files on the computer. This software allows you to right click on a folder to view its contents in a list. Then you mouse to any folder in the list and give him also as a sublist - and so forth as deeply as you want until you reach the folder or file you want. Right click on an item in the waterfall and you get a list of useful options. However, if the Bluetooth Manager is running when you do the right click, power drawers breaks down and you must close and re-open explorer.exe to recover.

  The conflict stops if you remove "to Bluetooth" in the context menu of files and folders. I proved this by using ShellExView from Nirsoft http://www.nirsoft.net/utils/shexview.html to disable the registry key "Bluetooth File extension" [sic]. This key is associated with the C:\WINDOWS\system32\TosBtShell.dll and the CLSID {6BEF3D0B-53F0-4b0d-B91C-C19ED3D4C9D1}. Unfortunately the registry key back again every time that you restart the Bluetooth Manager.

  David Tong.

  Hello

  Thanks for the information.
  However, on the Toshiba Bluetooth page you can always notice whether or not the new version of the driver BT is available.
  http://APS.toshiba-tro.de/Bluetooth/

  I recommend you to visit this site regularly

• Stacking and trunking

  Hello

  I have a question regarding trunking in combination with the stacked switches. In my example, I have two switches that are stacked and stacked switch. I placed all the sales employees in VLAN 10 (put first in the stack) and the management VLAN 20 (second switch in the stack) on switches employees stacked. The servers are on 30 VLAN on the switch stacked.

  I need to assign trunkports between two switches stacked in order to allow the stacked switches communicate?

  Thanks in advance!

  The ports that are used for the stacking shouldn't be junction ports.  They are only dedicated for stacking, and once the two (or more) switches are stacked together, they become a single logical switch.  Think about your carpet as a simple switch.  You only need ports of connectors for the connection between the battery and the only stacked switch.

  I hope this helps.

  B

• SG500X - stacking and 10GbE Uplink together

  Hi guys,.

  I use a SG500x in native mode of stacking, using 10g ports S1/S2.

  My question is, in this mode am I could simultaneously use 10 GB uplinks/XG1 XG2 ports? The manual is not clear at all!

  If I can both stack and uplink at the same time can someone also let me know if I get the full 40 GB of bandwidth?

  Finally I need a SPF 10 GbE module so I can run cat6 from the ports of X 1 / X 2 for 10 GbE on my cluster but network cards can work on which we're compatible!

  Sorry lots of questions!

  Thank you guys

  Hi Sam, you can use the ports of the battery and the other 2 10 gig. S1/S2 are the default stack ports. The S3/S4 would be considered ports network at this time here, but can be toggled to use S3/S4 instead of S1/S2.

  The ability of the switch is 128 Gbps on the model of port 24 th, 176 Gbps on the 48-Port models. So, if you say a 48 switch ports.  1 = 48 x 48. 10 x 4 = 40. 40 plus 48 is 88.  88 x 2 = 176.

  You should get the result you want (if you can actually use the link 10 gig to capacity, many Internet tele-conferences are not yet used to full 10 gig).

  For the SFP capatibility, you can reference the Administrator's guide. It has all the modules support. Once you choose your module support you should talk to your provider of NETWORK card with one should work with your cluster.

  -Tom
  Please mark replied messages useful

• Audio film blackBerry Smartphones BlackBerry Torch and lag synchronization problems

  Anyone has this problem where after some time watching a movie the audio appears trolling out and synchronization of his lips is the way out. The image also appears to stutter and lag? Any who have the same problem and or know to remedy this? The files work fine on my mac, but when on the Blackberry, they have this problem. Its quite annoying, so anyone with a fix or a solution that had the same issues please let me know how I can sort. Thank you very much

  Hi RADIKAL69

  If you watch a movie, I would recommend ensuring that no other application works (apart from the basic such as Messages, home, telephone, BBM and browser apps).  You can do this by pressing the menu button to see what applications are running and enter each of them to close in now the back button, or by pressing Menu > close/exit.  In addition, for best performance, disable all network connections.

  If the BlackBerry is your film treatment and trying to deal with other tasks in the background, this could cause some lag in the audio synchronization.

  Thank you

• Row1-row2(without lead and lag function)

  Hello
  
  I wanted less row1 - row2 can I could use at least conditions he same for 1000 lines and should not use the features of lead and lag
  
  
  Thank you

  It if self explaining IMHO

  with data as (
  select 9 r from dual union all
  select 7 from dual union all
  select 6 from dual union all
  select 3 from dual
  )
  , rdata as (
  select r, row_number() over (order by r desc) rn
  from data
  )
  
  select
  d1.r - nvl(d2.r, '0') res
  from
  rdata d1, rdata d2
  where
  d1.rn +1 =d2.rn(+)
  
  RES
  2
  1
  3
  3 
  

  Concerning

• What is the difference between LEAD and LAG?

  Hi all
  Please let me know the difference between LEAD and LAG even if both are functions. Analytics, where we can use specific to improve performance.
  
  Thanks in advance.
  
  concerning
  PRAMOD

  Pramod salvation,

  pramod62917 wrote:
  Please let me know the difference between LEAD and LAG

  The main difference is in which way is 'research ':
  -Lead will "transfer" in respect of the order by clause
  -Lag goes "back" with regard to the order by clause

  See this example (Basic):

  Scott@my11g SQL>ed
  Wrote file afiedt.buf
  
    1  with t as (
    2  select 'TeamX' team, 1 player_id, 'PlayerA' name from dual
    3  union all select 'TeamX' team, 2 player_id, 'PlayerB' name from dual
    4  union all select 'TeamX' team, 3 player_id, 'PlayerC' name from dual
    5  union all select 'TeamX' team, 4 player_id, 'PlayerD' name from dual
    6  union all select 'TeamZ' team, 1 player_id, 'PlayerJ' name from dual
    7  union all select 'TeamZ' team, 2 player_id, 'PlayerK' name from dual
    8  union all select 'TeamZ' team, 3 player_id, 'PlayerL' name from dual
    9  -- end of sample data --
   10  )
   11  select
   12  team
   13  ,player_id current_play_id
   14  ,name current_name
   15  ,lead(name) over (partition by team order by player_id) next_name
   16  ,lag(name) over (partition by team order by player_id) prev_name
   17* from t
  Scott@my11g SQL>/
  
  TEAM  CURRENT_PLAY_ID CURRENT NEXT_NA PREV_NA
  ----- --------------- ------- ------- -------
  TeamX               1 PlayerA PlayerB
  TeamX               2 PlayerB PlayerC PlayerA
  TeamX               3 PlayerC PlayerD PlayerB
  TeamX               4 PlayerD         PlayerC
  TeamZ               1 PlayerJ PlayerK
  TeamZ               2 PlayerK PlayerL PlayerJ
  TeamZ               3 PlayerL         PlayerK
  
  7 rows selected.
  

  On the first line + (team = TeamX, current_play_id = 1) +, the next_name once PlayerA regarding the order given by +(order by player_id) + team +(partition by team) + playerB. For this line it is not prev_name like no player as an inferior player_id wihtin this team.
  On the 3rd line +(team=TeamX, current_play=3) +, the once next_name PlayerC in regards to the order given by the team PlayerD, the previous is PlayerB.

• Firefox is very slow and lag for most of the sites I visit, cannot figure out how to fix.

  It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond.

  I tried all suggestions that I found in help, including "Firefox uses too many resources", "Firefox crashes or does not ', and 'Unresponsive script - how to fix. I deleted the history, cookies and cache, reset Firefox, reinstalled, all what I can. I disabled all my extensions and modules one by one to see that if they touched, I took care of everything, including Firefox is updated. Nothing has changed behavior.

  Here, any help would be appreciated.

  How about a whole new profile?

  SEE: use the Profile Manager to create and delete profiles Firefox

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• How to uninstall TOSHIBA Bluetooth Stack and all the drivers?

  Hello! I installed TOSHIBA Bluetooth Stack of [here | http://aps2.toshiba-tro.de/bluetooth/?page=download] or, more precisely of the [here | http://aps2.toshiba-tro.de/bluetooth/?page=download-toshiba] (8.00.12 |) Windows 2000 / XP / Vista / Windows 7 x 32 | Multilanguage) (_I have windows xp_). I tried to connect my phone with it, but it didn't work the way I expected.

  As I did not, I tried to uninstall, but I had problems there too. :( I was able to uninstall it from the Control Panel / Add-Remove programs and I also uninstalled in Device Manager, but it does not work too.

  It is more drivers, and they are all on my system: in my departure much I option 'connect too', in the Panel, I "Bluetooth Local COM" and Bluetooth devices Manager also lights up while windows starts... I had to remove all those things, but I don't know how? Help, please!

  Also, if someone could explain to me how to transfer data through your Toshibas Bluetooth, that would be nice too - in this case I would not uninstall it. Only in this case when it seems useless to me, these drivers are only bothers me. They spread throughout the system as someone wanted to hurt me! xD

  Thank you once again, people! :)

  * EDIT *: I now have to stop bluetooth manager executed departure while windows starts, so now it's less a problem. I don't particularly want some unnecessary processes slow down my computer. On the other hand, there is a problem that I have not mentioned - the computer restarts it self without reason in some cases. However, it seems that these reboots are associated with uninstalling programs - especially during attempts to uninstall toshiba bluetooth stack. Anyway I'll examine this reboot problem a bit more tomorrow perhaps it relates only to install/uninstall these drivers toshibas.

  Post edited by: samir89ns
  the reason for the change: I forgot to say certain things

  I use laptops Toshiba and Toshiba BT for years and I've never had no problem to connect my mobile phone using the BT software. I use it mainly to transfer data (photo made by mobile phone).
  It is so easy to make the connection between the computer laptop and phone so I n t understand why you have all these problems.

  If you n t need it disable Autostart BT software.

  You have for Toshiba laptop?

• Satellite L850 - 13p high temperature and lag PSKDNE game while

  Hello

  as you can see from the pictures that my laptop is to do very hot ween playing just five minutes in any game... and the part of frustrating, it of ween happens to 100 ° c the games lag becose the cpu between thermal protection and lowers the frequency but after the cooler starts to spin only it it cools and the frame of the game rate returns to normal...

  Is there something I can do to keep the cooler at a constant rate of RPM?

  One of my friends has a laptop from other manufacturer who is 17 "with i5 and and the same video card and this is not the case at all naturally cooler HES is so quiet...

  Sorry for my English hope you understand guys and pls [http://postimg.org/image/qxm5wa3l9/] see the picture I have attached.

  Thank you!

  > computer laptop gets very hot ween playing just five minutes in any game... and the frustrating part is that he ween arrives at 100 c the games lag becose the cpu between thermal protection and lowers the frequency but after the cooler starts to spin it it cools and the frame of the game rate returns to normal...

  As you say; the game starts late because the temperature increases to a critical level. That's GPU and CPU performance should be lowered until the temperature would come down.
  To me, it seems that the internal parts can not be properly cooled.

  To ensure a cooling performance better, please make sure that the cooling fans would be free of dust and air can circulate properly.

  Also I recommend you to check the parameters of cooling in the Windows power management settings. The parameters of the single electric plan contains options to control different devices, while the laptop is running in battery mode or to the main stream.
  You can set the modules of cooling performance. I think it would be also desirable to diminish the value of 85%-90% max CPU performance, just to check if it would help to eliminate the delay.

• Re: Overheating and lag issues on the Satellite C660/C660D

  Hello community of Toshiba

  I am a new user of Toshiba, I have a new Toshiba laptop as a model of its Satellite C660 / C660D, I use my new laptop for 6 months and I have some kind of a lot of time on my laptop. Sometimes I keep it open for more than 10 hours.

  My problem is like 3-4 months at the bottom right of the screen there is a caution came out as "there's something wrong with your hard drive, you should give it to any service of Toshiba for warranty".
  But it happened because I played on users, I mean users option for windows, not something material, changing just the current user name caused this and he now has weird name when I reversed the name change; He turned to something like TOSH ~ 1, etc.

  After several times, I mean like 1 month ago, my computer got very slow. Video games with their high resolution, but now the phone LAGS even I put it in low resolution, I played... I did not change any material or touched. But it is frustrating to see that I can't do the things I used to do more.

  Another thing is, I'm afraid of the heat from the laptop. Is it normal to have 49-50 degrees? Because when I play games, it is around this level. I live in a hot city.

  Some people asked me to use HD Tune to check that if I have a bad sector on the hard drive, I did. Does not work either.
  I deleted some of my files to get the free space on my HARD drive also, likely 150 concerts altogether. I even wiped the empty space in my HDD via CCleaner. I often do the basis of registry-fix with it as well. Movies and games flash hangs out as well. And sometimes when I watch videos, the sound cuts, so I have to pause, and then click play it again to fix it but it happens in various video players, not youtube. Very probably all watching anime.

  And what do I do? I don't want to go for the service, I'm sure they'll make me wait several weeks of 100%. I use usually my laptop with its adapter. Oh and, over the life of my laptop, 2 - 3 times he got stopped himself while it wasn't on the map whenever I check, he was really but really hot.

  So, what should I do? I don't want to open the computer to look inside, I do not understand, and he would risk my 2 year warranty.

  I am looking forward for your answers, I'll be very happy. Thank you.

  Post edited by: Blizzart (model added to the topic)

  It is not easy to say what the problem is here. In General, you should think about upgrading the RAM to the maximum level. With more RAM laptop should have more power and different operations should be made much more quickly.

  To make my laptop better and faster I ve upgraded RAM to the maximum level and also changed SSD HARD drive. So big difference there and phone now works like a rocket. Think about upgrading RAM.
  > Another thing is, I'm afraid of the heat from the laptop. Is it normal to have 49-50 degrees?
  From my point of view, this temperature is normal and certainly not too high. When you use your laptop, place it on the office and ensure that the cooling fan and cooling rack are free and not blocked.

  Don t open your laptop. Anyway, you can't do anything except to void your warranty. RAM upgrade can be done by the owner of the laptop and it will not void your warranty.

• 5548 stack and LACP

  Hi all

  First post here; so I'm sorry if I'm in the wrong thread...

  I inherited a bunch of 5548.

  I have two "stacks"; a stack of three (3) devices and another battery of two (2) devices.

  The stack of three is a cluster VM and the stack of the two is the network/IDF.

  On the side of the IDF, I have this:

  !
  interface gigabitethernet1/0/43
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/44
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/45
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/46
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/47
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/48
  Description 'link to 5548 vmstk.
  Auto mode channel-group 6
  !

  and in the vmstack I have this:

  dl5548-vmstk # sh running-config interface gigabitethernet 0/1/47-48
  interface gigabitethernet1/0/47
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !
  interface gigabitethernet1/0/48
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !
  dl5548-vmstk # sh running-config interface gigabitethernet 0/2/47-48
  interface gigabitethernet2/0/47
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !
  interface gigabitethernet2/0/48
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !
  dl5548-vmstk # sh running-config interface gigabitethernet 0/3/47-48
  interface gigabitethernet3/0/47
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !
  interface gigabitethernet3/0/48
  Description 'link to 5548-stk.
  Auto mode channel-group 6
  !

  I'm looking for validation that this is a valid config...

  vmstk item in gi1/0/47-48 goes to idfstk item in gi1/0/43-44

  vmstk gi2/0/47-48 goes to idfstk item in gi1/0/45-46

  vmstk IG3/0/47-48 goes to idfstk item in gi1/0/47-48

  vmstk [1,2,3] are connected via hdmi cables stackable...

  Should I have a separate for each switch port-channels?

  Is the same port on each switch of vmstk channel a problem?

  Is this a SMLT/STI problem? (http://en.wikipedia.org/wiki/Link_aggregation and http://en.wikipedia.org/wiki/IEEE_802.3ad)

  SH interface counters port-channel 6

  on both devices shows no error...

  Thanks in advance.

  All these counters seem to be good. What config looks like the Group 6 of the chain?

  Have we not different cables, that we can try with the channel group? See if that makes a difference on ports going up and down.

  Configuration changes made during the timestamps in the newspapers?

  Thank you

• Remove a switch in the stack and put on another battery, it will work

  Hello!
  I have two different batteries, in two different place

  Location01
  STack01-> with dial-up dell PC8164-01 and 02-PC8164

  Location02
  STack02-> with dell switched PC8164-03 and 04-PC8164

  On all switches, I use the same ports for stacking

  Now, assume that this scenario:
  If the switch PC8164-02, which is a member of stack01 located in Location01 is damaged and I remove switch 04-PC8164 of location02 and connect to location01, it will be normally function and configuration of the reception of the other switch in battery PC8164-01, and he will be a Member?

  Kind regards!

  Yes, the switch will operate normally. When the switch is connected to the other battery it will see that there is already a main switch, since it has only 2 switches, it will become the cutout of backup, synchronization configuration and become an active member of the stack.

  You will need to ensure that all switches are on the same firmware.