HP 2600n stuck initializing

Similar Questions

• HP LaserJet Ent.MFP M725f: Stuck 'Initializing 30' on HP LaserJet Ent.MFP M725f

  Hello good day...

  CAN anybody face this problem with the HP LaserJet Enterprise M725f MFP printer, printer is not continue starting and blocked when processing of the

  "Initializing 30."

  Thank you in advance for those who can help me solve this problem

  Please see attachment AutoForm caught the screen of the printer.

  Thank you

  

  The first step would be to go into the pre start menu and do a partial cleaning.

  The partial clean will wipe away the active partition, including data on this subject and then once the printer starts it reload the backup partition partition.

  To enter the pre boot menu power cycle the printer and press the HP icon when 1/8 appears below.

  You can see also a full clean option that will wipe the hard drive and the machine will have to be recharged from the USB firmware before it will work again. You do not use this option unless the partial clean does not help.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• P1102w stuck initializing after power off the printer

  Product: HP p1102w CE657A printer

  OS: Win - 7 64-bit SP1

  Error: printer not end initialization - time attention and ready lights flash simultaneously and continuously.

  I recently rearranged some furniture in my office and had to unplug all of my electronics in the process. After having everything plugged back to turn on the printer, it is stuck at initialization and will do nothing else.

  I tried the following, not necessarily in the order listed since I was in this for the better part of the afternoon:

  -Taking the wireless and Cancel buttons reset factory default has no effect.

  -I can't access it through the IP address, she had when I turned it off via a USB connection or wireless.

  -I can't print a configuration page to see if it has the same IP address.

  -Whisky.

  -J' uninstalled the drivers for my computer to reinstall the printer.

  -All attempts to reinstall the printer do not have the printer does not communicate with my computer via a USB connection, regardless of the method of installation (SmartInstall starts; installation CD or downloaded that both drivers get to a point where they want to make sure the printer is turned on and connected via a USB cable, and that's what I go with it.)

  -Blasphemy.

  -L' utility Dr. HP Scan can't find the printer and thus do not address it. He was unable to find the printer until the drivers have been uninstalled.

  -Try the steps above using two other computers in the House was just as frustrating and unproductive.

  The printer has not been abandoned, kicked or abused in anyway during the movement of furniture so it may not be the question.

  Similar problems were held with this printer during the summer when I bought my new computer and the printer was disconnected while I was moving some cords. The problem seemed to correct itself spontaneously and I have no idea how I work and what I've done differently.

  Any help would be appreciated.

  See you soon,.

  Boozerbear60

  Usually in this case, the printer does not have a sufficient amount of power. Make sure that the printer is connected directly to a wall outlet. If you are connecting to a lightning arrester, power strip, or rescued food, she is unable to get enough power to complete the initialization cycle. If it does not, follow the steps outlined in the document below the link to try to get the printer to answer. As a last effort before contacting HP on a replacement printer, do a hard reset. I'll post the instructions below. Let me know what happens.

  The printer will not turn on or respond

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Why Photoshop CC (2015) stuck initializing?

  I am on Windows 10 and can't Photoshop to open. I uninstalled, run CC cleaner, reinstalled and still the same problem. And I'm on a deadline. Ugh.

  Thanks for the update

  * Don't consider my last answer, we now open Photoshop

  If you still get C++ errors when launching Photoshop.

  Close Photoshop

  Fix all the Microsoft C++ Re-Distributable entered the program in Control Panel > program and features

  

  Go to Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

  Re-download the 2012

  You will get not the C == error in Photoshop

  Thank you for your Patience

  Good luck!

  ~ Assani

• get stuck when you try to run an installer built in!

  Hello, all!  I'm new to the forum.  I worked on and off LabVIEW Development.  One of my projects, it must be that I am building a VI to download information from a PLC.  The information is laid out in an excel file, where a macro is ran by program to convert the news for a more user-friendly look and playback.

  This is my first, an installer of construction so I thought to test.  When I packed the VI into an executable and a Setup program, it was all smooth sailing.  However, when I tested the installation program on several computers (with no LV or LV - RTE), few took 5 to 10 minutes to complete the installation.  Others are stuck initially in the installation process... generally when the process is to install 'Microsoft Run Time Engine.  On a computer, the installation process was canceled and restarted several times without success.  Then, the next morning (after a reboot), the installation worked without problem.  On another computer, I did the whole 'install-cancel-restart install' process.  After three times I checked the Manager task and noticed it was also a lot of files msiexec.exe continues even after that facility had been cancelled and the interface of the closed facility.  I ended up all msiexec.exe, ran again the installation process, and it went smoothly from 0 to 100%.

  Although it's great that I had the installer through smoothly after completing the msiexec process, it cannot do as the solution to an installation complete.

  Has anyone ever run into this issue?  Computers, on which I have tested are all connected to the company network, but the files are installed in C:\Program Files.  I'll test the installation on personal laptops and computers to see if it is some kind of security problem Admin/Norton/as our IT has implemented.

  Hi all

  Thanks to those who responded to try and help me.  After a few weeks of investigation, I came to the following conclusion: the LV Installer built is suspended due to the msiexec Windows XP.  I found a few online solutions, one of them involving "restoration" the MSI installer (I don't remember the other...).  Due to the nature of the software that I build, users enter in their records is not a viable option.  Instead, the following roundabout will have to:

  1 Win - XP user installs the software.

  2. If installation of Win - XP user is suspended (see the attached picture where I hung on a PC Win - XP), they will have to open the Task Manager and "complete the process -" all processes msiexec.exe... after a few seconds, the installation prompts the user that a certain file failed to install and ask if they want to continue.  The user will click on continue and repeat if Setup hangs again.  This should be done until the installation is complete (that I had to do this three times repeatedly).  At the end (if I remember correctly), the installation prompts the user that the process has failed.

  At this point, the installation closes. BUT all the necessary files seem to be there.  The software seems to work ok with several test is running - no problem.

  As I am short on time and have to run out of the office... I just remembered that the alternative is to try to install on the administrator account.  Probably, the reason why the installer crashes is because the given user account has permissions to read/write appropriate in C:\Program Files.

  Any thoughts are appreciated.  Thanks LV community - have a good weekend!

• HP m225dw: my HP Laserjet Pro M225dw MFP is stuck on logo HP "initialization".

  Help!  I did everything suggested in previous posts, but my printer is still initializing mode.  Too bad I saw work scanner, but I was stuck initializing mode to try to solve all these problems.  Help, please.

  Hey @missmgm,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your M225dw Laserjet stuck initializing. I can help you with that, but I'll need to know what troubleshooting steps you have tried first. Once I know that I will be better able to help you.

• Help please - Windows update - restart issues (and upgrade to Windows 10 questions?)

  Hello

  I wanted to switch to Windows 10 but got stuck on the "start download" page, as have other users.

  Looking through the other questions on this site, I have seen that Windows update may need to complete before you start with Windows 10.

  I had not run windows update for a long time I thought that would mean Windows 10 would install and I wasn't ready for this, but now I am.

  Then I ran windows update and more than 150 updates have been installed.

  However, he now says:

  "Restart your computer to install important updates

  Windows cannot update services and important files while the system uses them.  Save... "

  I rebooted, shut down, rebooted several times, but this message continues to appear in the Windows Update window.

  Still, the update of Windows 10 stuck initially download.

  I ran disk cleanup in safe mode, as well as normal and tried to restart, but it did not help.  I tried the troubleshooting windows update option, but this did not help.

  I used two tools, the Microsoft FixIt who did not help and a WindowsUpdateDiagnostic.diagcab file which allows to find the two errors and saying: he fixed them, but this still does not work, IE always ask me to restart and Windows 10 gets stuck to download from.

  The two problems it finds are listed as:

  "Windows Update error 0 x 80070005(2016-05-30-T-08_49_44P)" and is listed as fixed

  "Problems install the latest updates" and is considered to be fixed.

  I am at my wits end and would be really grateful for the help.

  If this becomes technical, please help me in using a step by step method or referring to one for me.

  I have a laptop of Toshiba Windows 7 64-bit.

  Thanks in advance

  EDIT: I ran the above diagnostic tool and the error was fixed progresses over time, that is to say it is correct to say 09:03 now...  Also, to revise accordingly the so-called updates installed, many of them, but not all, have the status of a failed.

  What to do about all this?

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:

  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:

  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:

  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please restart your computer and wait 20 minutes for the system to operate before you download the information needed to help me investigate your problem. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• MFP M225dw: Printer stuck on 'initializing '.

  I bought the printer in February 2015 (less than 6 months ago) and on my network without wire (connected via surge protector which was brand new).  Everything was excellent until a week ago.  Aware of the printer went away, and when he came, he remained on the screen during initialization.  I let go 48 hours without change.  I have unplugged for an hour and replugged it in, no change.  I unplugged for 3 days and tried again, no luck.

  I came on the forums and tried the steps recommended in another post:

  Tried a hard reset (disconnect while remaining on and wait 60 seconds, reconnect to a wall outlet)-nope

  Tempted to drain power (unplug everything in now the power button / Stop button for 30 seconds)-nope

  Tried to update the software from HP Support Assistant on my computer, all updates current and no change

  I even went as far as uninstalling the printer and the software from my computer and attempt to connect via a USB connection - the solution was problematic, because the printer never have to ready mode to install the software.

  Attempted to intall for wireless network, but I get to the menu on the printer because of its being stuck on initializing wireless.

  Need help please, I'm more frustrated by the day and can't go much longer without the printer.  I invested more money to ensure that I had a reliable quality printer.  Cheaper printers does not fizz out on me this quickly!

  Hi @KJUser,

  I see by your post that the printer is locked during initialization. I want to help you.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• M177fw MFP: MFP M177fw stuck at initializing

  «Hi there, then put in place the printer by the book / manual.» I am able to scan documents using the HP software, but I can't print anything. The touchscreen is stcuk to "initialize". The M177fw and the laptop are connected in WiFi.

  When I click on the 'status' button of supplies, the text on the touch screen becomes to XYZ color, but this task is never ending. Any number of reboots always shows "initializing". Please let me how can know I do this printer print documents.

  Thank you

  T HP

  Hi @T-HP.

  Thank you for joining the HP Forums!

  I noticed your post on how your HP Laserjet M177fw printer is stuck on initializing. And I'm happy to help you!

  Please first try a hard reset by following the steps in this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector.

  If the hard reset does not solve the problem, I also have you sent for a factory reset instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  We'll see what happens!

• How to clear an hp laser jet m1217nfw that is stuck on initializing

  printer flashing and stuck on initializing

  If the unit is locked during initialization, then it might be something in the firmware of the printer.  Before you perform a reset, make sure that all the troubleshooting steps are completed.  I'll link the document to troubleshoot a non-responsive printer below.

  The printer will not turn on or respond

  If the steps do not help, then follow the reset of the information that I will send you via private message.  Before this type of reset, please read Bob_Headrick wire on the reset of the printer.  This thread can be found here.

• I had problems with the color mode. kept, restart photoshop to find the problem. NOW Photoshop CS6 will not organize, it is stuck on "initializing". How to start?

  At first my documents were pasted on the CMYK color mode, and I couldn't understand how to convert the file in RGB.

  Finally, I abandoned, saved the file and tried to present what I was working on a Web site.

  Before that, I closed photoshop and he raised 2 times in a row to test color on profiles. When finally it seemed to me he decided to go back to RGB, I closed and returned to climb my image. However, the site did not accept it because the jpg was in CMYK. So, I went to relaunch photoshop to convert its color profile and now photoshop will not launch.

  As a first step, it got stuck on "checking memory."

  I closed my computer to see if this would clearly be the question, then tried to restart photoshop and it is now stuck on "initializing".

  I really need photoshop work, so how can I solve this problem?

  Laptop: The Retina of Macbook Pro screen

  OS: OSX 10.11.3 EL Capitan

  PS: Adobe Photoshop CS6

  It is the first time that I ever had this problem, and I've had this program for 2012.

  Hi shiblets,

  Please press the home button on the keyboard when you see the screen "initializing".

  If it does not, please press the SHIFT key and then launch Photoshop, to ignore the third party Plugin.

  Kind regards

  Tanuj

• After Effects stuck at initializing MediaCore

  I have not used After Effects in some time, and after starting it recently that I quickly stuck on "initializing MediaCore.

  I tried:

  -Updated all my programs, drivers, and the after effects itself (Lateset CC version)

  -Reinstall after effects, Photoshop, Quicktime

  -Remove all plugins

  -Removed preference files

  -As Admin

  -Deletion of AE all files associated with

  Here are the errors I get:

  SplashScreen starts normal but the text simply says "Initializing MediaCore '

  Freezes for 1-2 Minutes

  SplashScreen farm

  This set of errors pop up:

  "Library of Photoshop failed to load. PSD files will not be supported. You may need to reinstall. »

  Then "After effects WARNING: unknown Exception.

  Then "after effects error: cannot unlock an unlocked list.» (4: 27)

  Then "after effects error: current Crash.". Last logged message was: 7116 > < GPUManager > < 2 > Sniffer result Code: 3

  This error is sometimes different

  And finally the last one said after "than the effects could not sue sorry... »

  Thanks for any help!

  If you have tried everything in this link: Hang | Initialization MediaCore | Splash screen:

  Can you show the screenshots of what goes wrong in the CC 2014 and 2015 CC?

• When I open it gets stuck on "initializing installation" and the green bar does not move. How can I fix it so it installs?

  The installation program of Adobe cloud downloaded on the internet perfectly but when I open it stuck at "initializing installation" and the green bar does not move. How can I fix it so it installs?

  Multiredwolf123 did you use the steps listed in the "Failed to install" error request Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to solve the current error?

• Hyperion uninstall stuck on Initializing

  Dear all,
  
  When I did uninstall it using Add/Remove programs or Uninstall.cmd, the uninstall program is stuck on initializing.
  
  Someone at - it ideas on how to uninstall to work?
  
  Thanks in advance...

  Good reading of it then:- Re: cannot UNINSTALL VERSION 11. Please help
  It should help you.
  On top of what he says in the link if you manually remove that you might also need to remove services, a single method, is to go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services regedit and remove the Hyperion of related services, restart the machine.

  See you soon

  John
  http://John-Goodwin.blogspot.com/