(3F0) hard drive in HP pavilion P017TU failure

Similar Questions

• Pavilion p6-2330: hard drive for the error message failure

  I need to know what to do in response to: "short hard drive DST-Failed", failure ID: 60E3KV - 0007Q 9 - WPTXOK - 60QD03 on a desktop pavilion p6-2330.

  When the computer is turned on, it presents a loop; try to solve the problem, but unable to do so.

  The memory test is 'spent '.

  SMART hard disk check is 'passed '.

  Thank you.

  Hello.

  This 24 character of error codes when generated from the HARD drive test indicates a Smart failure or disk Self Test - in both cases, this means that the drive is defective and must be replaced.

  You always have access to the data stored on the disk? If you do, then save as much information as possible and look for a replacement drive. If the product is still under warranty, you can contact support, but in case you have no guarantee and you would like a guide to replacing the hard drive yourself – please let me know.

  I hope this helps and good luck!

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• Hard drive the HP PAVILION DV6T - 4000 NOTES

  My hard drive on HP PAVILION DV6T - 4000 NOTE failed. I need to order a replacement hard drive. Kindly let me know the best option for the same.

  Hello

  This is a technical director of the machine so very little information we can find. He uses this means you can use any standard SATA HDD SATA. If you want to buy the original size and the brand, you can order from HP, or any computer store.

  My suggestion: a WD SATA II 750 GB at 7200 RPM should work fine.

  Kind regards.

• Format the hard drive of a Pavilion nc5310

  Please explain how to format the hard drive of a pavilion of nc5310 in order to install a very light distribution of Linus.

  I couldn't find anything in a search of the internet.

  Thank you.

  There are many ways to format the hard drive. You did not really provide details...

  You can download the Ultimate Boot CD (UBCD) and burn it to a CD, then you can boot from the CD and use the tools of HARD drive to remove the partitions/erase the hard drive.

  http://www.ultimatebootcd.com/download.html

• Adding a hard drive to a Pavilion 6000 series computer

  My Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan?

  I am running Windows 7, so what matters.

  Linda820 wrote: my Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan? I am running Windows 7, so what matters.

  Hello Linda820, here is the link for information on how to remove the hard drive from the Pavilion p6210f.

  Look at the bottom of the page for instructions on hard drive. It is a fairly simple process.

  The only real "shove" the process is the system of lock at the bottom of the hard drive cage. You can see in the photo instructions.

  Since you know exactly on the other HP model, it should be the same procedure to install the disk hard of the faulty system to the recently acquired system, or close to the same.

  You must cable Sata of the old system, given that the other system probably does not have one, and you need to connect to the right of the current hard drve Sata port port.

• I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?

  I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?  Somewhere in the 320 to 500 GB range and I want a quick unit because it will be used for rendering videos.    Thank you for your response.

  Hello

  How fast is fast is the real question.

  Have you looked at hybrid drives OCZ? Expensive but probably the fastest option.

  Seagate also made a hybrid hard drive.  Good price... You will need a 3.5 "to 2.5" support if the player does not support.  If you install the drive in an empty optical Bay then you will need a 5.25 "to 2.5" support.

  Your other choice is 7 200 or 10 000 rpm traditional hard drives.

  Another option would be to add a PCI sata and two external hard dirves configured in RAID 0.

• Pavilion dv6t-6100: DST tests, running-in, System Tune Up and hard drive failed - which means ID failure?

  The above tests failed, and passed the SMART tests, memory and battery.  I had problems with a program so I rean these diagnoses.  Failure ID is 9LGDWX-5M984B-MFH15G-60SN03.  What is the code of failure?  If I need a new hard drive, how can I find out what you get it?

  Hello

  The error code 24 characters is a disk failure short self-test and would indicate that hard is defective and must be replaced.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 70 of your & Maintenance Guide.

  Once this is done, simply use your recovery media to reinstall the operating system on the new drive - this is described in the document of HP here.

  Kind regards

  DP - K

• Install the new hard drive into the Pavilion DV2660se - full-size unrecognized

  I have a Pavilion DV2660se and recently began to receive messages from failure on my hard drive.  I was able to order a replacement - it is the same model # former disc, same size, etc..  I installed the drive, then started the system with the recovery discs.  It has been chugging along now for about 3 hours. While the process was ongoing, I was able to look at the drive and to see that it is only accepted with 24 GB instead of the 250 GB is it really.

  Any suggestions on what I can do to install this player and have all recognized?  Thanks for the tips!

  Well, I'm back, don't ask me how, I can at least with all rebuild...

• Large hard drive on HP Pavilion M9361 elite.

  Hi all

  I have a HP Pavilion M9361 3 years old uk spec, the second hard drive failed the other day which was a Hitachi 500 GB, 3 GB / s, as he says failure of hard drive soon!

  So I got from Amazon Uk has D Hitachi 1 TB 6 GB per second HARD drive and I connected on the old location, restarted windows vista 64 bit and it just gets in the first blue HP screen and crashes.

  I'm doing something wrong?

  Any help is always appreciated

  Thank you very much

  Steve,

  Hi Steve,.

  If the PC starts again without the new installed hard drive then the PC was non-RAID 0 and RAID 1 mode.

  It is possible that the Intel RAID controller trying to format and synchronize drives. This could take a while. You should see some messages. You see?

  If not, try the following.

  You may need to drop the RAID parring in the Intel RAID Utility. Don't forget that your data and your hard drive is backed up. You should see instructions when you start on how to access the Intel RAID Utility.  Usually the keys Ctrl + I keys will allow you to access the utility. That, without the new installed hard drive.

  Once you remove the parring RAID then you should be able to boot your PC.  If it works, then go ahead and install the new hard drive and see if the PC boots. If the PC does not until now with the new HD then attached the new HD is dead.

• Hard drive on HP Pavilion Notebook PC g4 Faliure?

  Model: HP Pavilion Notebook PC g4

  System ID: 165C

  Product ID: LW342UA #ABA

  Processor: AMD Athlon (TM) II P650 Dual-Core processor

  Serial number: 5CD1241GPC

  OS: Windows 7 Home Premium 64-bit

  After a short period of time left on a surface hard and easily broken down in the standby mode, the laptop was considerably lag. I tried to restart it (after you have closed all programs) to see if that would fix the freezing, without result. Concerned, I have restored the laptop to an earlier date (yesterday), but that has not solved the problem.

  I ran a test run-in via the start menu, and it doesn't have; the cause was the hard drive, and when I ran the specific test on the hard drive, it has also failed.

  The ID of the error it gave me both times was: 9LGKKW-5NQ6GL-MFPV56-60RQ03, followed by the product ID of the hard disk, which is listed above (product ID, he registered as a Hard Disk 1). The failure has been described as a failure of the short DST.

  I was wondering what the problem was, how I could possibly fix this (and otherwise, if the covered guarantee) and any other information that I could possibly be given about the issue.

  I use a different laptop to access this site.

  If the laptop is under warranty, HP will replace the hard drive. Call them and ask that they send you a replacement unit rather than ask them to send the entire unit. You did the recovery discs? If this isn't the case, you need to ask a set of thise be bundled with the drive. It seems that data may still be recoverable on the old drive, but I doubt that it now allows a set fo used recovery disks.

• HP Pavilion G6: replacement hard drive on hp pavilion g6

  Im trying to replace a hard drive on a HP pavilion G6 model number is G6 2239dx so I looked hard drives compatible with this model number that I did not buy directly from HP for a heavy sum. I found the other G6 drives with different model numbers, now I know that I certainly need the model number to order the Pack recovery but on the hard drive. It is somehow specific model number or can I use a hard drive from a 1B79dx of G6 G6 model number or any other g6 also. I'm new on this and do not want to buy something I can't use and have not been able to find clear information, I'm looking for. Any help is appreciated!

  Hello

  Basically you can use any standard laptop HARD drive. But please use Hitachi or Toshiba. HP machines use Toshiba HDD much. You don't need special HARD drive to your machine.

  Kind regards.

• Add hard drive to the Pavilion e9240f

  Can I add another internal hard drive to my HP Pavilion e9240f that works under Windows 7 64-bit?  I'm looking to acquire another "Western Digital 1 TB Caviar Green SATA Intellipower 32 MB Cache Bulk/OEM Desktop Hard Drive WD10EADS" to complete the original, but I need to know if a drive location and connectivity is available for the disc.  I took a peek inside the case and there seems to be available, but I want to be sure before venturing forward.  In addition the original hard drive, my PC has 2 CD/DVD players.

  Hello

  I have the same case with my HP e9280t and it is supplied for two hard disks.  You will need a SATA data cable.  The motherboard has six SATA ports, so you won't have to question to find an empty SATA port.

  The specifications for the Commission on the motherboard shows SATA I and SATA II ports.  You should be OK with the SATA III disc as I have not seen any problems with SATA III drives on SATA II ports.  I've seen some laptops have problems with SATA III SSD on SATA channels.

  Check with Western Digital and see if you need to apply an update to the firmware on the hard disk.  I see that HP has a firmware for this drive, but I don't know if it will work on your particular WD drive.

  Be sure to do a full format on the hard drive.

  ' HP ' how-to ' articles should be useful.

• is there a slide in the hard drive for hp pavilion m8013w

  I want to load windows 8.1 on my current hp pavilion m8013w but, don't want to erase Vista with all my data on the current hard drive.

  So I think to install a hard drive "slide in" front loading slot and on the hard disk and then move all my data of visited.

  Anyone know what I should do when shopping for a slide in the hard drive.  is there a model number?

  Peace!

  Isely, welcome to the forum.

  Have you run the Wizard upgrade of Windows 8 to ensure that the components of the computer are compatible with Win 8.1?  It is available in the link I have provided.

  I am not sure what you mean by a hard drive "slide in".  You hear a "Personal Media Drive"?  If so, I can't find one any where.

  If the computer is compatible with Win 8.1, it would be easier to buy a SATA hard drive.  You can use the FREE copy of Aomei Partion Wizard to transfer your BONES and your data.  I downloaded it to see what it will do.  It seems to be a great program.  You should read all the 'tutorials' which are provided.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Pavilion laptop laptop 15-au20nl: adding a 2nd hard drive to computer Pavilion 15 laptop-au20nl

  Hi, I just picked a new Pavilion to the-20nl and I need to add a second hdd for my personal files for the existing SSD.

  Before you open the laptop, I would like to know if it is possible. Did someone just tried?

  Thank you

  Concerning

  Luca

  Hi @LucaV,

  Thanks for getting back to me with the information.

  Please look at pages 32-34 of the Maintenance and Service Guide.

  It has the hard drive part number and instructions to get the HDD and SSD.

  HP has continually enhances and modifies the components of the product. For complete information and up to date on
  supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
  Follow the on-screen instructions.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.  To simply say thank you, click the Thumbs up below!

  Thank you.