4.0 ai2 - automatic adjustment does not properly in the result of the query grid

Similar Questions

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• Update panels does not properly since the 2015.2.1

  My sidebar panels does not work properly since the update. Hit the tab key does not hide the sidebar: sidebar remains visible. Also, sometimes I can't access the menu bar, or change view (shift f command).

  On the retina mi Macbook Pro, OS X 10.11 2015.

  I drove back to 6 and are no longer problems. Any suggestions on how to upgrade to the current version without problems?

  Make sure that you are on 6.1.1 the latest stable version.  Help > system information to check your version.  See these instructions if you are not on 6.1.1: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/.  6.1.1 LR has some important bug fixes to 6.0 which has affected a large number of people.

  Adobe has apologized for the mess in LR CC 2015.2 / 6.2: update of Lightroom 6.2 Release and apologies, update of Lightroom Import 6.2. So don't waste your time trying to get 6.2.1 work - wait for 6.3 and let others do the beta testing.

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• WLan / WiFi works does not properly on the Satellite C55C-C-16f

  Hello

  I just bought the laptop toshiba Toshiba Satellite C55C-C-16f mentioned in the title, and there seems to be something wrong with the WiFi adapter.

  Sometimes it connects to the WiFi, but most often, when I start the computer (whether by or stand when it is off), it finds no network and cannot connect to my WiFi router. Usually, when I restart the computer all of a sudden does ot connects to the network. I tried the filming of standard Windows problems, but it can not find problems or repair.

  I hope you can help!

  Best regards

  I just have the same problem with my new ray. If I have more than 2 m from the router, the reception is 1 bar. Most often the laptop can't find any network.
  I tried to put maximum performance in energy saving mode, but it doesn't change anything...

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• layout does not properly when the phone is in landscape mode

  Hello everyone,

  I created a Web page with 3 different configurations: desktop, Tablet and phone. Each presentation has several breakpoints. For example, the available phone has 2 breakpoints, at 375 px and 667 px.

  I've published on businesscatalyst. When I open the page with my iPhone portrait 6 mode, it works fine, but when I turn my phone horizontally, in landscape mode, everything is misplaced. The layout of phone 667 px does not appear.

  Any ideas why this is and how to fix it?

  Is it necessary to make 3 different models, for each device, or can I just do a desktop with several breakpoints layout, corresponding to the fixed and mobile devices? If I do this, my page will be considered by Google 'sensitive '?

  Thank you all,.

  Anne

  Hello Mimi_furnicutza,

  What Muse version do you use?

  If you use (pre-release) version beta Muse then I advise you to this post on the forum dedicated to the pre-release version.

  Adobe Muse Private Beta Program

  Kind regards

  Vivek

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad

• Support page does not properly to the FTP host

  I've recently updated my muse and once I did that one of my support pages will not load corectly now. I have 16 pages of support and all others work fine. I tried to download on another computer. created a new support page and fly over all content. restored the site to an older version that I had saved and are not allowing this unique support page load correctly. www.medamilitaria.com support page edge weapons. I also created the new page support edge weapons 2 today and it still does not

  Hello

  Seems that the page is not correctly exported to the root location.

  Please check if the page is exported to the root or not, if not then try to export to html format and then use any client FTP to move the html file exported to the root of your replacement existing ones.

  Thank you

  Sanjit

• Paragraph styles works does not properly on the table

  I placed a table created in Word, and then on the application of my paragraph styles.  However, not all my styles work fine.  Specifically my style of Description of the tool which includes a nested style.  The nested style does not follow the rules, given that it is.  The name of the tool should in Helvetica Neue Condensed Medium (in uppercase) while the next Description the en dash should be Helvetica Neue Light Condensed (normal caps).  On the contrary, it seems that the middle is applied randomly in the whole of the description.

  Also, when I apply my style request said I find myself with a lot of pink highlighted text implying that the police is missing when it is clearly not column.  This could be due to the recommended symbol?  Any advice on how to work around these issues?  See the picture below which shows the two questions.

  miz_nrg wrote:

  I do this in Word or CO-OPERATE?

  InDesign. You should be able to clear overrides from the paragraph Styles Panel menu.

  Check for character styles applied, you don't want to, also, if something is still wobbly.

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• Automatic fonts does not work in the press

  My default font color is automatic. I can't print the document.

  Hi LauraMorales,

  ·         Which application you want to print?

  ·         What happens when you try to print?

  You can follow this link and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• INsert Into does not work in the query

  I wrote this part of my web site that allows you to insert records in the DB. Right now it does not work properly. I get no error, but I do not also get a new record. Can you see why this is happening? I write two pages of code, the edit page and the action page. I can't understand what Miss me.
  
  Change page:
  
  < name = "cfparam url.id' type = 'integer' default = '0' >"
  < name cfparam = "variables. ProjectID' type = "integer" default = "#url.id #" >
  < name = "cfparam variables.proj_name" default = "" > "
  < name cfparam = "variables. Default Description"=" ">
  < name cfparam = "variables. Default CategoryID"=" ">
  < name = "cfparam variables.cat_name" default = "" > "
  < cfif url.id GT 0 >
  "< name cfquery ="projMan"datasource =" "#sitedatasource #" username = "#siteUserID #" password = "#sitePassword #" >
  SELECT c.CategoryID,
  c.Name AS cat_name,
  p.ProjectID,
  p.Name AS proj_name,
  p.Description
  CATEGORIES AS c
  INNER JOIN project GOT p ON c.CategoryID = p.CategoryID
  WHERE p.ProjectID = < cfqueryparam value = "" #URL.ID # "cfsqltype ="cf_sql_integer">"
  AND c.CategoryID = p.CategoryID
  < / cfquery >
  < cfif projMan.RecordCount EQ 1 >
  < cfset variables. ProjectID = projMan.ProjectID >
  < cfset variables.proj_name = projMan.proj_name >
  < cfset variables. Description = projMan.Description >
  < cfset variables.cat_name = projMan.cat_name >
  < cfset variables. CategoryID = projMan.CategoryID >
  < / cfif >
  < / cfif >
  < name cfquery = 'catList' datasource = "" #sitedatasource # ""
  username = "" #siteUserID # "password =" #sitePassword #">"
  SELECT DISTINCT categories. CategoryID, Categories.Name AS cat_name
  Categories
  ORDER BY name
  < / cfquery >
  < head >
  < / head >
  < body >
  < cfoutput >
  < form action = method of "project - Action.cfm" = "post" name = 'projects' id = 'projects '.
  enctype = "multipart/form-data" onsubmit = "saveIt ()" >
  < input type = "hidden" name = 'ID' value = '#variables. ProjectID #">"
  
  < input type = "text" name = 'proj_name' class = 'textInputs"value =" ' #variables.proj_name # ' maxLength '510' = > "
  
  "< textarea cols =" "lines =" "name ="PDSeditor"style =" display: none "> #variables. Description # < / textarea >
  
  < select name = "CategoryID" size = "1" class = 'everyday' >
  < IsDefined ("projMan.CategoryID") cfif >
  < option value = "#projMan.CategoryID #" > #projMan.cat_name # < / option >
  < cfelse >
  < option value = "" >--select a category--< / option >
  < / cfif >
  < cfloop query = 'catList' >
  < option value = "#CategoryID #" > #cat_name # < / option >
  < / cfloop >
  < / select > < / cfoutput >
  < / body >
  
  
  «"" "Action page:»»"»
  
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #
  password = "#sitePassword #" >
  Projects UPDATE
  SET
  Projects.Name = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.proj_name #" >.
  Projects.CategoryID = < cfqueryparam value = '#form. "CategoryID #" cfsqlType = "CF_SQL_INTEGER" >.
  Projects.Description = < cfqueryparam cfsqltype = "cf_sql_longvarchar."
  value = '#form. PDSeditor #">"
  WHERE ProjectID = < cfqueryparam value = "" #form.ID # "cfsqlType ="CF_SQL_INTEGER">"
  < / cfquery >
  < cflocation url = 'project - manager .cfm' >
  < cfelse >
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #
  password = "#sitePassword #" >
  INSERT INTO projects
  (Name, Description, CategoryID)
  VALUES
  (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.proj_name #" >,)
  < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form. PDSeditor #">,"
  < cfqueryparam value = '#form. ("CategoryID #" cfsqlType = "CF_SQL_INTEGER" >)
  < / cfquery >
  < cflocation url = 'project - manager .cfm' >
  
  
  I don't see why there is no records are transferred to the DB. Can someone help me?
  
  Thank you.
  
  Phoenix

  the order of the values that you insert is different from the order of the array
  fields, that they are inserted in your INSERT query:

  INSERT INTO projects
  (Name, body, MYFile, CategoryID)
  VALUES
  (,
  ,
  ,
  
  NULL = "#NOT fileuploaded # ' >)

  in the part of the INSERTION, the order of the fields is NAME, BODY, MYFILE CATEGORYID
  in the part of VALUES, the order of the values is NAME, BODY, CATEGORYID, MYFILE

  HTH

  ---
  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• Badge of adjustment does not properly.

  Dear all,

  The badge settings won't save. I dragged one of the badges to display in the profile pop-up menu, but it is not saving. Before it was working fine.

  Thanks in advance.

  Manu.

  Manu, it's a known bug. As far as I know it will be fixed in a future patch.

  Timo