Similar Questions

• ACS authentication with Active Directory based on ad groups

  Hello

  I'm trying to integrate Cisco ACS 5.4.0.46 with AD and I connected successfully GBA to AD and I used as a successful AD authentication for network devices but my problem now is that anyone with an AD account can connect to network devices that compromises security. I created a group in AD that I would use and I added the group under users and identity stores > external identity stores > Active Directory > groups directory. I also chose source of identity for Default Device Admin as AD1 and under the authorization, an authorization policy that uses a compound condition that uses AD1 and the custom group. However after you have set all that I am still able to connect to the switch with a user not in the custom group. Based on what I have explained to you can someone tell me if Miss me a step?

  Thank you

  Derek Velez

  Thanks for the update and the fence wire. Set default default rules to deny access when user legimitate if does not match a rule set by the administration of the CSA he should get denied access. In your case, it has been updated a permit so that both type of users access (members and non-members of ad groups).

  The best way to resolve these issues is to look at the monitoring and troubleshooting > attempt user > magnifying glass. You will see how this user has been allowed access.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Version of Cisco ACS 5.1.0.44.3 integrate with active directory server from Microsoft windows 2012?

  Version of Cisco ACS 5.1.0.44.3 integrate with active directory Microsoft windows 2012 R2 server?

  Unfortunately, it does not support R2 2012

  5.1 ACS supports all editions of:

  Windows Active Directory (AD) 2000

  Windows AD 2003

  Windows AD 2003 R2

  Windows AD 2008

  Source

  Windows AD 2012 R2 is supported after ACS 5.5 patch 1 and following.

  Source

  Please find below the steps to go from 5.1 to 5.5 hotfix 1:

  STEP	FILE	COMMAND
  Apply the 5.1 patch 6	5-1-0-44 - 6.tar.gpg	ACS patch install repository 5-1-0-44 - 6.tar.gpg ftp_repository_name
  Apply 5.3	ACS_5.3.0.40.tar.gz	application upgrade ACS_5.3.0.40.tar.gz ftp_repository_name
  Apply the patch 5.3 8	5-3-0-40 - 8.tar.gpg	ACS patch install repository 5-3-0-40 - 8.tar.gpg ftp_repository_name
  Apply the sharp Patch	Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg	ACS patch installs Pointed-PreUpgrade -CSCum04132- 5-3-0 - 40.tar.gpg repository ftp_repository_name
  Apply 5.5	ACS_5.5.0.46.tar.gz	application upgrade ACS_5.5.0.46.tar.gz ftp_repository_name
  Apply the patch 5.5 1	5-5-0-46 - 1.tar.gpg	ACS patch install repository 5-5-0-46 - 1.tar.gpg ftp_repository_name

  Best regards ~ jousset

• Integration with Active Directory OraHome92?

  Let me first say that I have absolutely zero knowledge of all Oracle products, I don't know if I'm posting in the right forum, but I'm here, if I need to ask another forum please let me know.

  Question:
  We are Microsoft System administrators. We have a client that is running a very old application to the database on a Windows 2003 server. Currently they use a new database (Oracle, not), but the oracle database must accessible for research in history.

  The application works very well.

  We plan to migrate the domain existing (Active Directory) to a couple of servers R2 2012.

  The 2003 with oracle server is also a domain controller, and we do not want in our field of 2012R2 2003 domain controllers.

  Our question is can demote us this domain controller and Orahome92 will work after the demotion?

  Server 2003 is not the FSMO, the FSMO is a Windows Server 2008.

  In other words, how Orahome92 integrates with Active Directory? Or isn't there any Active Directory integration and may us just demote the server and leave it to run as a member of the domain server?

  Maybe you need more information about oracle, all I can say that the following services are running:

  OracleMTSRecoveryService
  OracleOraHome92TNListener

  OracleServiceORCL

  Oracle installed, but NOT running services:
  OracleOraHome92Agent
  OracleOraHome92ClientCache
  OracleOraHome92HTTPServer

  OracleOraHome92PAgingServer

  OracleOraHome92SNMPPeerEncapsulator

  OracleOraHome92SNMPPeerMasterAgent

  
  

  I hope sombody can give treatment of this or point us in the right direction.

  I would not be protected by an export created like this. It is not a full export, is an export of the only pattern and you may need more than that if it is necessary to rebuild the database. In addition, it is not a coherent export which may make it unnecessary. I was running export something like this:

  exp.exe System/sys@oracle_w3 complete file=d:\directory\\file.dmp = compliance = y

  You may think it's all pretty awkward. The problem is that it is generally considered bad practice to install Oracle on a domain controller, unless you install as a member of the domain administrators group. I guess just like you do not have that, you can be able to downgrade the machine without affecting the database. But I don't really know, Windows security is a mystery to me.

• OEDQ integration with Active Directory - disable SSL

  Hi mates,

  I just installed OEDQ (latest version) on a Unix machine (deployed on WebLogic Server 10.3.6) but I have a few concerns:

  • SSL communications -> is mandatory? I mean, I tried to expose dndirector via a Server Web Apache OHS admin page. I am able to access the page from admin in raw mode, but every time I try to access a specific feature (dashboard, user management, server configuration, etc.) I am redirected to https://< web-server-hostname >: < wls-server-ssl-port > / dndirector, if this is not what I expect. What's wrong? Moreover, if SSL is required, is there a way to expose the console via apache (avoiding any redirect)?
  • OEDQ with Active Directory -> documentation- OEDQ integration with Active Directory - covers just Single Sign-on configuration (on the two Windows/Unix os). What about a simple configuration pointing to an external ldap? The documentation States the following statement:

  It is also possible to configure OEDQ to work with servers of different directory for authentication of users and the identification of the user. For more information on the alternative configurations, "see"contact us" "

  So, how can I achieve this?

  Pointers?

  Thanks in advance,

  Marco

  Marco

  Here is an example configuration that can be used to integrate with AD.  Create a folder called Security in your Disqualification configuration directory, and save the file in this folder as login.properties.  There are a few supporinting of documentation online this process in aid of the Disqualification.

  Here is the file, I'll add a few notes below:

  realms                        = internal, adgss                           = false
  
  ad.realm                      = EXAMPLE.COMad.auth                       = ldapad.auth.bindmethod            = digest-md5ad.auth.binddn                = search: sAMAccountNamead.ldap.server                = dc.example.comad.ldap.auth                  = simplead.ldap.user                  = [email protected]                    = testad.ldap.profile               = adsldapad.ldap.prof.defaultusergroup = testgroupad.ldap.prof.useprimarygroup  = false
  

  The kingdoms line indicates that the 'internal' (Disqualification internal users such as dnadmin) Kingdom and the Kingdom of AD should be used.  Once you are satisfied with the integration of ads you can remove the internal domain and use AD exclusively.  The domain property sets the name of the field AD - here I used EXAMPLE.COM.

  The server property sets the DNS name of the AD server.  If omitted, it is looked up in the DNS.

  The lines of the user and pw are used to connect to AD Disqualification.

  The defaultusergroup line is the name of a LDAP group that contains all users who will use the Disqualification.  The default value for this is domain users that contains usually much too many users.

  Once it is setup and working, you can go to Setup user Disqualification and see a link to external groups that attach ad with Disqualification groups groups to assign permissions to users.

  I hope this helps.

  Richard

• Simple Active Directory integration

  Hello

  I need to integrate a portal Cisco 9.3.1 with Active Directory in order to demonstrate the capabilities of the portal in a classic 'AD' environment.

  I have reviewed the documentation for two weeks, but not really found any answers to my questions.

  The PDF documentation is quite minimalist and seems to imply knowledge of older versions of Newscale.

  So here are my questions:

  • Is it possible to import my users A.D. in the database of the portal of Cisco?
  • Why then I log in my portal with admin/admin when I activated authentication events external (it says in the intro that auth. local is tested by default before external one).
  • Y at - it somewhere more complete documentation on these issues?

  What would be great is a sheet of best practices on how to integrate the portal into AD.

  Thank you in advance.

  David

  It should still work if you use the UPN-AD for the EUABindDN. I have my lab work but with the events of "Search person" and not the events of connection. I'll have to test it with connection events.

  Make sure that you try to import all users data for fields that you map. If there is a field that is NULL in AD but which is mapped in your Center application mappings then the import will fail. You can test this by going to the configuration of mappings and the login name of the AD (sAMAccountName) and then by testing research to see that all mapped fields are filled with data. This search will use your UPN format ([email protected] / * /) to query the AD and pull the info there should therefore be a test valid user to import event.

• BI Publisher with Active Directory - slow connection

  Hello, I was wondering if anyone had to set up BI Publisher with Active directory. We are on 11.1.1.1.7 OBIEE - integrated with Active Directory. It takes about 40-50 seconds to connect on:

  http://bnrbidevapp1.es.gwu.edu:9704 / xmlpserver

  
  

  We have a different BEEP workigng insanance, they are also connected to the same ad and the connection is instant. What I can adjust? Checked memory and RAM on the system, doubled the RAM, so its double the system that has instant access. What else can I check? Thank you!

  This followed and it is resolved:

  http://www.peakindicators.com/files/document/33/Oracle%20bi%2011g%20-%20active%20directory%20authentication.PDF

• VCOPS 5.8 - where is the "Active Directory integration"?

  5.8 Notes version is a "novelty".

  Authentication options with the new integration with active directory for authentication.

  Where is this new option? All I see is former "LDAP import', which works, somehow. I was expecting something more easy to AD.

  I understand that it was a typo in the rel notes, because there is no change in the integration of Ops 5.8 vC ads. I think that this excerpt was intended to rel Insight journal notes, that add features more AD.

• iDRAC Active Directory integration

  Hello

  I recently tried to integrate all our DRACs here with Active Directory to connect this way, rather than a generic username and the password shared by several employees. I downloaded the Dell Remote Access Configuration tool and it works beautifully. It is able to define the appropriate settings for many DRAC allow AD users to sign everything at once.

  However, there is a slight problem that I can't seem to understand. On the DRACs 11 of the ~ 50 that I have configured this way, credentials fail. I thought maybe I was just fat-fingering the keys, but after having several people try both the holiday and work DRAC, there seems to be a problem with the way those 11 have been configured.

  I did every configuration run in groups of about 10, and within each group, there was 1 or 2 that just did not work properly. After you have compiled a list of the 11 who did not work properly, I even tried to run through Setup once again, does not. And looking at the information provided to me, there is nothing to differentiate these from another ~ 40 who succeeded. There is so much iDRAC6s and iDRAC7s, and there are several different firmware versions. Basically, what I'm trying to say is that if I have a card DRAC of the same type in the 11 that don't work, there are one of the same type, version of the firmware, model and in the 40 ~ that work. So, I can't see the problem.

  I hope this is enough information to find someone has begun to help solve my problem. If anyone has any questions or suggestions, I would be very happy to have in your.

  Thank you

  Jacob

  Hello Jacob

  If there was a problem with one or two iDRAC, I would say that this could be a hardware problem or a problem with a bad firmware image. Because what is happening across a large percentage of your question iDRAC is probably with the configuration of your network or security. I suggest you to check your network configuration to ensure that the iDRAC who have problems is able to communicate properly with the advertising server.

  If you feel that there is a problem with the iDRAC so I suggest firmware reflashing, reset the default values and then reconfigure one of the iDRAC problem manually to see if the problem persists.

  Thank you

• Autenticateing Oracle with Active Directory database

  I installed Oracle database 11.2.0.3.0 on Windows 2008 Server R2 64 bit. The company uses Microsoft Active Directory and I need to set up access to the Oracle database for users that are stored in Active Directory. Do I need another product in addition to the database to do? If so, what version of the product would need?

  To bind the user to Oracle database for users that are stored in Active Directory, and you must create the Oracle schema objects and an Oracle context.

  You can see the chapter on "Requirements for using Oracle with Active Directory database"
  http://docs.Oracle.com/CD/B28359_01/win.111/b32010/active_dir.htm#CDECHCBC

• Robo 9 plays nice with Active DIrectory?

  Hello, just try to make a business case for RoboHelp 9 and 9 RoboServer and trying to find any info on how it integrates with Active Directory. Can use info in AD to manage localized content or require a maintenance of a separate user database to control access to the help output?

  Thank you

  This has been answered on the forum HATT.

  http://groups.Yahoo.com/group/Hatt/message/78026

  Also consider using dynamic centred on the user content if you want different users to see different areas of assistance.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Passwords enable ISE device Administration (ACS) integrating with Active Directory

  I'm working on a standalone application ISE and running into a problem where the password to enable for a device is not shoot properly.  I have the original connection related AD and I policy conditions/results/sets all as they should be working.  My test run is a 2960 S.  I tried to set up ' group aaa authentication enable default Activate ', but the only way I could do a login enabled with which was if the user has configured locally in ISE identity management > identity > users.  Is there something that I missed that tie will enable passwords for a group active directory as I work for the initial logon?

  I see just a mistake with your failure to enable aaa authentication enable. You must specify the Group of Ganymede.

  Right now, I don't have access to my lab with ISE.

  Here's my config for switches used with ACS.

  AAA authentication login GANYMEDE-SRV Group Ganymede + local
  local authentication AAA Console connection
  Group AAA dot1x default authentication RADIUS
  AAA authorization exec GANYMEDE-SRV Group Ganymede + local
  AAA authorization commands 15 GANYMEDE-SRV Group Ganymede + local
  Group AAA authorization network default RADIUS
  AAA accounting exec GANYMEDE-SRV arrhythmic group Ganymede +.
  orders accounting AAA 15 GANYMEDE-SRV arrhythmic group Ganymede +.

  If you give me all out maybe we can understand why your GANYMEDE ISE works do not with the AD. I see no reason except a misconfiguration or another issue.

  Just to go to the mode, you need more aaa authentication command activate by default enable. This activation mode is pushed to the user if he gets the privilege 15. Your problem should be on the profile or politics. With the approval journal, we can see whether or not ISE pushes politics and why?

• ACS &amp; Active Directory integration

  Hello world

  I am currently working on a deployment of the ACS that is only used for authentication of the user for network devices and I was wondering if there was any advantages or disadvantages for the integration of the ACS in Active Directory.  Anyone know if there are benefits to keep the two separate technologies?  The integration helps simplify management?  Any information or guidance would be greatly appreciated.

  Hi Miller,

  The main advantage is that you don't have to create a user/password to the ACS. When we have a lot of users is easy to map to Active Directory rather then manually setting GBA users.

  It easier for the administrator.

  The only downside is when connectivity between FAC and AD breaks, users won't be able to connect.

  Kind regards

  ~ JG

  Note the useful messages!

• ESX - integration with Active Directory: Kerberos?

  Hi all

  We set up the integration of ads for SSH on ESX 3.5 U3 accounts.

  esxcfg-auth - enablead works very well:

  esxcfg-auth - enablead - addomain = our.domain.com - addc = our.domain.com

  For some reason, there was already an additional line in the configuration script: esxcfg-auth - enablekrb5

  esxcfg-auth--enablekrb5--krb5realm=our.domain.com--krb5kdc=our.domain.com--krb5adminserver=our.domain.com

  Things go awry as soon as the last command entered.

  When you add a local account with this powershell command, we get this error:

  New-VMHostAccount: 12/05/2009-10:17:11 new-VMHostAccount 52976ebb - 2 d 24

  -f493-9aa3-bca7894ef581 a general error has occurred: passwd: Authenticate

  mishandling symbolic ion

  The local account is created, but the equivalent of Active Directory gets locked out, after several of these events:

  Failed prior authentication

  User name: USER-TEST

  ID: DOMAIN\TEST-USER

  Service name: kadmin/changepw

  Pre-authentication type: 0x0

  Error code: 0 x 19

  Customer's address: 10.10.120.16

  Now, I have two questions for you:

  1 - does anyone how to solve the problem of blocking

  2 East - -enablekrb5 necessary? What gives me extra in addition to enablead-

  Thanks for your help!

  Kind regards

  Harold

  enablekrb5 is not necessary.  The enablead will set up your kerberos configuration to talk to ad.  the krb5 option is used when you use a KDC that does not have active directory.  In addition, when you create an account on the side ESX, it's pretty much an account without password.  At least no password in UNIX file perspective shadow.  Authentication works by checking the files local to the user name (since the announcement does not serve for the Pb of the user, only authentication), then check the password in the local files, which do not have a password, so failure, and continuing to the announcement through kerberos, for a successful verification.  If you try to create an account with a password on the ESX system, then this is the problem.  You don't need to put it, in fact, it must be without password, so without posting, the user can connect to the system via ssh not effectively or console.

  -KjB

  VMware vExpert

• Integration with Active Directory or SSO OID?

  We seek in our options of single sign-on integration with OBIEE Oracle EBS 11.5.10 on top. Currently we have MS Active Directory and Oracle Internet Directory with our users synchronized upward in both.
  
  Can anyone recommend which is better for the OBIEE LDAP/SSO integration and provide the pros and cons of each? Thanks in advance

  PTRAN2,

  If you have any OID then use with AD, you also an external table if you want to be able to define groups, CheminPortail etc. Groups and users can currently be imported, ad, only authenticated against it. It works fine but OID should be admin much more straightforward.

  Ed