Similar Questions

• 4.2 ACS Cisco with Active Directory integration

  Hello

  I m new in the administration of the ACS, we have recently implemented on ACS version 4.2 Server

  to manage all the authorization of users in our network.

  We are in an environment with at least one Active Directory server, group, and users.

  Now, I m just able to create a new user in ACS and work with the switch of the customer, do I have to do, is to integrate my 4.2 ACS with Active Directory.

  to work with the user and group that a registry in my ad.

  Can someon help me please?

  Hello

  If you use windows server for CE 4.2 Installing you just need to do this the domain member server.

• Version of Cisco ACS 1121 5.3 - logging

  Hello

  I am new to Cisco ACS 5.X. What I've read, the Cisco ACS can act as a logging server. Does this mean, all messages from syslog to all other network and ACS devices can be stored by ACS? I'm a little confused on that part.

  Finally, I understand that Cisco ACS has many or perhaps 2 instances? When we use these instance? What is this instance?

  Kind regards

  RAM

  In the deployment, you must specify an acs as the Logcollector server. All other servers send the logs to the Logcollecter.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_sys...

  In a distributed deployment, each acs server is an instance. If you have a main instance and multiple secondary instances.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_sys...

  Sent by Cisco Support technique iPad App

• ACS authentication with Active Directory based on ad groups

  Hello

  I'm trying to integrate Cisco ACS 5.4.0.46 with AD and I connected successfully GBA to AD and I used as a successful AD authentication for network devices but my problem now is that anyone with an AD account can connect to network devices that compromises security. I created a group in AD that I would use and I added the group under users and identity stores > external identity stores > Active Directory > groups directory. I also chose source of identity for Default Device Admin as AD1 and under the authorization, an authorization policy that uses a compound condition that uses AD1 and the custom group. However after you have set all that I am still able to connect to the switch with a user not in the custom group. Based on what I have explained to you can someone tell me if Miss me a step?

  Thank you

  Derek Velez

  Thanks for the update and the fence wire. Set default default rules to deny access when user legimitate if does not match a rule set by the administration of the CSA he should get denied access. In your case, it has been updated a permit so that both type of users access (members and non-members of ad groups).

  The best way to resolve these issues is to look at the monitoring and troubleshooting > attempt user > magnifying glass. You will see how this user has been allowed access.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Passwords enable ISE device Administration (ACS) integrating with Active Directory

  I'm working on a standalone application ISE and running into a problem where the password to enable for a device is not shoot properly.  I have the original connection related AD and I policy conditions/results/sets all as they should be working.  My test run is a 2960 S.  I tried to set up ' group aaa authentication enable default Activate ', but the only way I could do a login enabled with which was if the user has configured locally in ISE identity management > identity > users.  Is there something that I missed that tie will enable passwords for a group active directory as I work for the initial logon?

  I see just a mistake with your failure to enable aaa authentication enable. You must specify the Group of Ganymede.

  Right now, I don't have access to my lab with ISE.

  Here's my config for switches used with ACS.

  AAA authentication login GANYMEDE-SRV Group Ganymede + local
  local authentication AAA Console connection
  Group AAA dot1x default authentication RADIUS
  AAA authorization exec GANYMEDE-SRV Group Ganymede + local
  AAA authorization commands 15 GANYMEDE-SRV Group Ganymede + local
  Group AAA authorization network default RADIUS
  AAA accounting exec GANYMEDE-SRV arrhythmic group Ganymede +.
  orders accounting AAA 15 GANYMEDE-SRV arrhythmic group Ganymede +.

  If you give me all out maybe we can understand why your GANYMEDE ISE works do not with the AD. I see no reason except a misconfiguration or another issue.

  Just to go to the mode, you need more aaa authentication command activate by default enable. This activation mode is pushed to the user if he gets the privilege 15. Your problem should be on the profile or politics. With the approval journal, we can see whether or not ISE pushes politics and why?

• How can I get a trial version of cisco ACS 5.4

  Hi guys:

  I would get a trial version of GBA 5.4 for educational purposes (certification LAB). I know that it is possible to download the ISO file of www.cisco.com, but when a try to download the file with my cisco CCO get a message asking me "an additional fee required. Do you know how can I get this software?

  PD: I was able to download a trial of this software (file *.lic) license, but I want to install the ACS in a VMWARE server and play with him. I need the ISO file.

  Thank you very much for your help

  Kind regards.

  Martin

  CCNA-CCNP-CCGD

  Certified Engineer

  Cisco limited offer of trial copies of some of its products. Those that are linked from here:

  http://www.Cisco.com/go/nmsevals

  In General, if it is not there, it is not available as a trial version. It is usually not Cisco policy to provide all the software trial for teaching and laboratory use.

  If you are working with a Cisco or a partner account manager, you will get an exception on a case-by-case basis.

• MAB with ACS (internal store) and 802. 1 X with Active Directory (external store)

  Hello

  at the moment we´re using ACS MAB. Every Mac are stored as internal hosts on GBA. I want to migrate to 802. 1 X.

  Users have AD. During the migration, I need MAB and 802. 1. X is it possible to use the database internally and externally at the same time to the

  same access strategy?

  Concerning

  Horst

  Hello Horst-

  Yes, you can do this by creating an "identity" store sequence and fix the two AD and the data store is internal to it. Take a look at the link below:

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-sequence

  Thank you for evaluating useful messages!

• Cisco ASA 8.3 ldap AAA configuration Microsoft active directory server fails

  Hello

  I'm trying to implement authentication ldap for remote vpn ssl users like the image below:

  

  When I try the test button and enter a user name and password I get the message ' authentication rejected: user not found. "

  Why? Please help, I am running out of options here... Thank you much much in advance.

  Use the DN of connection according to the following format.

  [email protected]/ * / _name and let me know how it goes.

  If the suggestion above does not work then please run the debugging ldap 255 and paste the result here.

  Rgds, jousset

  The rate of useful messages-

• Problem with certifcate on Cisco ACS

  We want to authenticate our internal wireless users using our Cisco ACS running 5.3.  GBA questions our Active Directory environment for the user name and password provided.  I created a CSR on GBA and it provided to Entrust.  They gave me a root certificate, string and server.  I've linked the server certificate to the CSR under System Administration > Local Server Certificates > local certificates.  I then added the chain and the root certificates to the users of the site and identity stores > autorit├⌐s.  When I try to connect to a laptop client he asks a user name and password, but after entering this information, I am presented with the warning on this certificate below.  This certificate is to Entrust and I see the certificate root in the root store on the laptop.  Any ideas what would cause this.  TAC does not seem to have all the answers.  They say it's a problem of the client machine.

  

  In case you want to check your configuration settings.

  http://www.Cisco.com/en/us/products/ps10315/products_configuration_example09186a0080bd1100.shtml

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ACS 4.1 for external advertising for authentication

  Hello

  We have just configured Cisco ACS 4.1 solution engine and using a Windows 2003 domain controller as a remote agent.we use as Protocol Ganymede.

  Users that are created in ACS himself are able to connect to various network devices. but users in domain (active directory) can not connect. We get the access denied message. same time we get external DB is not operational message in ACS.

  Active directory server where agent that runs in CSWINAgentlog, we get the following error 'NDLIB'... FOUND 0 TRUSTED DOMAIN.

  Could you please help us to isolate the problem.

  Thank you & best regards

  Make sure that the worm of acs and remote agent software is the same. And also execution of remote agent account must have special domain administrator rights, like the act as part of operating system and log in as a service.

  Kind regards

  ~ JG

• connection via Cisco ACS 5.0 limit

  Hi all

  My infrastrucer wireless a few days ago I deploy Cisco ACS 5.0 with Active directory integration. My wireless users are connecting through web authentication process. The authentication process is gone through AD & his works very well. But I want to work on my 5.0 ACS that a user cannot simultaneously connect several devices at a time.

  Hello Sabine,.

  'max sessions' featre introduced acs 5.3.

  Maximum user sessions

  For optimal performance, you can limit the number of concurrent users to access the network resources. ACS 5.3 imposes limits on the number of simultaneous sessions of service by the user.

  The limits are defined in several different ways. You can set limits to the user level or at the level of the group. Depending on the configurations of the user's maximum session, the session number is applied to the user.

  IMPORTANT: for maximum sessions work for access of the user, the administrator must configure RADIUS account management.

  You can go through the link listed for more information below:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/access_policies.html#wp1176806

  The code that you're using now ACS 5.0 is not recommended for a production environment. You need to upgrade the ACS to achieve the functionality of session max.

  Jatin kone
  -Does the rate of useful messages-

• Cisco Secure ACS groups 5.1 Active Directory and RSA Authentication Manager 7.1 for profiles

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; font-size: 11.0pt; font family: 'Calibri', 'sans-serif"; mso-ascii-font-family: Calibri; mso-ascii-theme-make: minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-make: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-make: minor-latin ;}"}

  Hello

  I'm deploying an ACS connected to an RSA AuthManager (that is connected to an Active Directory domain)

  I create several groups within the Active Directory server, I try to give to users for their groups different access rights.

  I tried to define an access policy "NetOp/NetAdm" and two authorization rules:

  Rule-1 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETOP 'Auth for net operators' 0

  Rule 2 AD - AD1:ExternalGroups contains all dir. INTRA/groups/NETADM 'Auth net admin' 0

  Default: refuse

  In the identity, I have configured the RSA identity source, so that users get authenticated by the RSA Authentication Manager.

  But I still refuse to get access, RSA authentication is successful, but the group membership, active directory does not work, even with the unix attributes or group principal defined for the user.

  My question is this valid configuration scenario? Is there another way to define several profiles according to the Group of users of external source?

  The stages of monitoring:

  Measures

  Request for access received RADIUS 11001

  11017 RADIUS creates a new session

  Assess Service selection strategy

  15004 Matched rule

  Access to Selected 15012 - NetOp/NetAdm service policy

  Evaluate the politics of identity

  15004 Matched rule

  15013 selected identity Store - server RSA

  24500 Authenticating user on the server's RSA SecurID.

  24501 a session is established with the server's RSA SecurID.

  24506 check successful operation code

  24505 user authentication succeeded.

  24553 user record has been cached

  24502 with RSA SecurID Server session is closed

  Authentication 22037 spent

  22023 proceed to the recovery of the attribute

  24628 user cache not enabled in the configuration of the RADIUS identity token store.

  Identity sequence 22016 completed an iteration of the IDStores

  Evaluate the strategy of group mapping

  15006 set default mapping rule

  Authorization of emergency policy assessment

  15042 no rule has been balanced

  Evaluation of authorization policy

  15006 set default mapping rule

  15016 selected the authorization - DenyAccess profile

  15039 selected authorization profile is DenyAccess

  11003 returned RADIUS Access-Reject

  Thank you

  Christophe

  I think you need to do is to create a sequence of identity with RSA as a selection in

  Authentication and recovery research list of attributes and AD in the additional attribute list recovery research. Then select this sequence as a result of the politics of identity for the service

• Cisco VPN client v5 and integration Active Directory 2008

  Hi all

  I need to know if I can integrate Single Sign On for my Cisco VPN Client v.5 with my Active Directory which run on windows 2008

  THX in advance

  No, unfortunately, Single Sign On is only supported on Clientless SSL VPN (WebVPN), not on the IPSec VPN Client AnyConnect VPN Client.

• Replication of ACS and integration with the Active directory database

  Hi all

  I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

  No need to give the IP of two ACS. Give the primary IP of ACS.

  Kind regards

  ~ JG

  Note the useful messages

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.