40 second delay to html5 video fluid page when you use a 5 android phone

Similar Questions

• Blank page when you use the section in a RTF

  I created a type of standard form with details of travel for each employee, page break on employee. To start numbering pages at 1 at the next employee, I used a section break.
  However, now I have an extra white page on each employee.
  A simplified version of the xml and rtf file can be found here:
  
  http://www2.Potsdam.edu/collinkj/BIPUBLISHER/
  
  It was created with Oracle BI Publisher 11.1.1.6
  
  Any ideas on what is causing the extra page would be appreciated.

  When you use @section it will by default set a new page for each group kept u and also reset page number.

  But in your model, you have used @section and also a jump of page before the end of the loop. delete this page break before the loop-end for each section.

  You must also remove the space after in your rtf model and space after each form field in section

  It will solve the problem.

  Published by: Avinash_Varma on February 11, 2013 14:51

• 11i Login page shows 'Error on Page' when you use IE 7

  Hi DBAs,
  
  
  I use Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). EBS is on RUP6 and using the JDK 1.6.0_12.
  I'm using Firefox and not getting not any question. I used the first time IE-7 (7.0.5x) to access the application. I noticed that by pressing the button "Login" on the Login Page, it has been said in the bottom left of the EI says "Error on page" and was not navigate to any page or did not perform any action.
  
  I checked all services and everything was OK. When you use Firefox, I was able to navigate through the application without any problem.
  
  Using IE 7, I am able to access
  
  http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin &; password = sysadmin
  
  Most of the stuff seems to work fine when recording using above URLS, but 'GO' buttons throwing same error in IE "error on page". Rest of the Bottons as "Browser Edit", "Edit Favorites" are working very well, but when I push the button 'Go' then IE error display on any Page. It seems to me that when the need for a button navigate to the next page then IE saying 'Error on page' but when a button do lunch a new page it works fine.
  
  All responsibilities and links work properly. Navigation application using Firefox works quite well.
  
  Looking for your advice and suggestions to solve the problem.
  
  Thank you
  -Samar-

  Samar,

  See the following document.

  Note: 810406.1 - request connection with IE7 gives Javascript error
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=810406.1

  Kind regards
  Hussein

• How to prevent large gaps on the Web page when you use the behaviours slide?

  I searched the forums for similar problems with application behavior slide to the elements through the DW CS5 interface and find a useful post titled "problem with Spry Applying"Slide Effect"so now my slide effects works the way I want to, except instead of dragging out a legend after clicking on an image I slip on a list of text items when you click on a section of text.  It works, but there is a gap when the first load of the Web page. How can I remove/avoid this great whitespace to appear?

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > test Document < /title >

  "<!-< script type =" text/javascript"src ="... / SpryAssets/SpryEffects.js "> < / script > - >"

  < script src = "SpryAssets/SpryEffects.js" type = "text/javascript" > < / script > "

  < script type = "text/javascript" >

  function MM_effectSlide (targetElement, duration, of, to, toggle)

  {

  Spry.Effect.DoSlide (targetElement, {duration: duration,:, to: to, turn on/off: toggle});

  }

  < /script >

  < / head >

  < body >

  < p > < / p >

  < p > < / p >

  < style type = "text/css" >

  #LOdiv {visibility: hidden ;}}

  #Countries {visibility: hidden ;}}

  < / style >

  < p > < / p >

  < p > < / p >

  (< div id = "Latte" onclick = "MM_effectSlide ('LOdiv', 1000,"0% ", 100%", true) ">"

  < p > < strong > drop-down list One + show < facilities > < / p >

  < / div >

  < div id = "LOdiv" >

  < div >

  -Item A < br / >

  -Point B < br / >

  -Point C < br / >

  -Section D < br / >

  -Point E < br / >

  -Item F < br / >

  -G spot < br / >

  -Point H < br / >

  -I point < / div >

  < / div >

  < / div >

  (< div id = "ListTwo" onclick = "MM_effectSlide ('country', 1000,"0% ", 100%", true) ">"

  < p > < strong > list two + show < facilities > < / p >

  < / div >

  < div id = 'Country' >

  < div >

  -USA < br / >

  -Germany < br / >

  -France < br / >

  -Italy < br / >

  -Japan < br / >

  -China < br / >

  < / div >

  < / div >

  < span style = "width: 990px;" height: 21px' > < img width = 990 height = 21

  SRC = "image386.gif" >

  </span >

  < / body >

  < / html >

  Hello

  in my opinion, this technique is not designed for the two panels. To do this you must use the "Spry several sliding elements"-technique in which panels will be triggered by the individual buttons. "" Here is the link for it:

  http://labs.adobe.com/technologies/spry/samples/effects/multiple_slides_sample.html.

  Hans-Günter

• HP Officejet J5780: Stripe yellow towards the bottom of the page when you use the document feeder

  When using the document feeder copy has a yellow stripe down page @21/8 "from the left margin. NO problem when using the tray.

  Hi @GlennG1 and welcome to the Forums of HP!

  I see that you have lines in the ADF.  I would like to help!

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend this document:

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Adobe Acrobat Pro XI scrolls a page when you use the pen

  I am currently using a surface that has been provided to work the stylus provided on windows with installed 8.1 Adobe Acrobat Pro XI.  Whenever a customer sign and cross a T in a certain way, it will be either scroll the document upwards or downwards (depending on how they are crossing the T) a page.  Who, after several pages of can get quite irritating.  Does anyone know how to fix this, please?

  Hi Preston,

  Check Mode Touch preferences for tablets & mobile phone. Refer to this document KB Acrobat help. Display of PDF files and preferences.

  Kind regards

  Nicos

• Can't redirect to another page when you use adfc-config. XML standalone WL

  Hi all
  I created an application very simple fusion, have only two pages jspx (View1 view2). I drag these two pages to the adfc-config file and created a flow control between these two pages (adfcView2).
  
  + <? XML version = "1.0" encoding = "UTF-8"? > +.
  + < adfc-config xmlns = "http://xmlns.oracle.com/adf/controller" version = "1.2" > +.
  + < id view 'View1' = > +.
  + < page > view1.jspx < / print this page > +.
  + < / view > +.
  + < id = "view2" view > +.
  + < page > view2.jspx < / print this page > +.
  + < / view > +.
  + <-flow-control rule > +.
  + View1 < of-activity-id > < / activity-ID-> +.
  < control-flow > box-+.
  + adfcView2 < from outcome > < / statement > +.
  + view2 < to-activity-id > < / activity-ID-> +.
  + < / control-flow-case > +.
  + < / flow control rule > +.
  + < / adfc-config > +.
  
  When I run the view1.jspx in the embeded WL, everything fine, can navigate between View1 and view2.
  
  But when I created an ear and deployed this ear to a standalone WL, View1 can be displayed correctly, but when I click a commandbutton control in View1, want navigator for view2, the page may not be redirected to view2 (always show view1.jspx). There is not an error msg in the WL Console.
  
  Have I missed anything for the taskflow application deployment? If I change the view controller of faces - config.xml not adfc - config.xml, all work fine.
  Any info is appreciated.
  
  Published by: harth on October 25, 2009 19:21

  Hi Harth,

  I suppose that you not run the jspx page view activity, check if your url contains .jspx page at the end. If so, execute the url without .jspx page at the end (which is the name of view id)

  For example:

  Give http://://faces/view1 instead of http://://faces/view1.jspx
  

  Jean Lou

  Published by: Marc Israel on October 25, 2009 20:00

• When you use quicklaunch to open a web page, if I already have an open page, how can I open a second page or pages using an icon from quick launch without closure or replacing the one I already opened?

  When you use quicklaunch to open a web page, if I already have an open page, how can I open a second page or pages using an icon from quick launch without closure or replacing the one I already opened?

  Hi Haubhaus,

  I know one thing to get your links to always open in a new window:
  1. Right-click on your desktop, select new, then shortcut
  2. Type "" C:\Program may Explorer\IEXPLORE. "." EXE" and click Next
  3. Name the shortcut (for example: Microsoft Home) and click Finish
  4. Right-click on the new shortcut and select Properties
  5. In the target box, arrow over until the end of the path, add a space and add -new (WEBSITEPATH). When your finished, your path should look like this:
     "" C:\Program may Explorer\IEXPLORE. "." "EXE" - new www.microsoft.com
  6. Click OK and try it!

  Let me know if it works or if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Performance issues when you use HTML5-Articles

  Hello world

  We build an application where we use HTML5-sensitive inside objects.

  On older iOS Devices (iPad2 iPad4 for example) and the performance is so bad that it is not really usable. Take for example up to 15 seconds of opening an Article downloaded until it is fully restored.

  We have a lot of photos and videos inside but inside the browser OS, it works a lot better.

  Is there anyone who has had the same issues or any idea how to optimize performance (especially on older devices)?

  Thanks in advance and best regards!

  Lars

  Lars salvation,

  The control of the OS used to display content on iOS is a different rendering than the OS browser technology and has different performance characteristics. In particular, it is slower on older devices, such as the iPad 2.

  Based on your description my guess is that your image size is driving performance issues. Take a look at what size in pixels are your images and aggressively, re - compress. I had successful scaling of images to 50% of the size I think I need and then save them in JPEG format at a quality level of 7 (or even 5) in Photoshop.

  Regarding the videos, make sure that you use the

  Neil

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• Text field (always submits page when you press enter)

  Hello
  
  I have two elements (username and password) and two buttons (Submit & cancel) when the user enters the correct DB table entry values and strike button SUBMIT with the < /b > < b > mouse it is able to go to the next internal page does not, up to here everything works absolutely perfect.
  
  But now, instead of clicking the button "SUBMIT" with the mouse, I want the user to use the functionality of the ENTER key on the keyboard and so I apply the two elements (username and password) as < b > text field (always submits page when you press enter) < /b > and < b > password (submits when you press enter) < /b > respectively.
  
  Also created a conditional branch and an unconditional branch (with the highest sequence number) by the research of the below thread: -.
  
  Re: Text field Element submits page when you press ENTER
  
  but still did not find any success, when I run the page with the correct details in the elements and press button nothing works the same page returns back to me with these two elements as empty?
  
  any help?
  
  
  thxs
  
  
  Kind regards
  Kumar

  Hello

  OK - two things...

  First of all, your branch to page 9 was conditional on the SUBMIT button

  Second, you had the condition that "request = Expression 1" where it should be "EXISTS.."

  I removed the button state and changed the condition type. Try it now

  Andy

• How can I remove the page options for my home pages when I use several home pages?

  I used several pages to my homepage with FireFox for a long time. I've recently updated my homepage as always - "use current pages" - now the firefox open the options page and which ones I want. It is not listed in the list of pages to open as home pages, but it nevertheless opens. I can't get rid of it because I have to open the options page to set the home pages.

  When you used the "use current pages" he adds all the tabs in the window that you were. Just remove the subject: preferences list in the box.

• When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

  When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
  I'm more interested in the case when this number is smaller than the total.

  Hello

  I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

  The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

  I hope this helps, but if not please come back here and we can look at another solution for you.

• Firefox crashes when you use Google as startup page

  Firefox crashes and gives me an error message general she had to close for some reasons.
  This only happens when I use Google as my home page.
  If I use another Web site as startpage all works well and I can go to Google from here and everything works.
  In short: FF hangs at startup only when you use Google as starpage, I see the Google page briefly and then crashes FF.
  I would really like any solution because I have always used Google start page and you want to keep it this way without having to start with i.e. altavista and go to google from there.

  This seems to be related to the new "doodles" with Olympic events. I hope that the problem will end this week.

  More information:

  • 14 Firefox crashes when the homepage is google.com. Firefox Support Forum
  • Firefox crashes at startup. Firefox Support Forum

• Just changed Safari on my imac. When you use find menu safari gave me the opportunity to "find in this page" which was an incredible aid during a search. Is it possible to have this feature using firefox?

  Just changed Safari on my imac. When you use the search menu in safari, I had the opportunity to "find in this page" which has been an incredible help while doing research and looking for specific words/phrases. Is it possible to have this feature using firefox?

  I think that Safari has the same keyboard shortcut in Firefox 'cmd + F' on a Mac or a 'Ctrl + F' on Windows.

  Look in the lower left corner to find. There are more likely to be next and previous differences in keyboard shortcuts, but continuing in the search bar at the bottom no matter what browser you use. It is an 'X' to reject the search bar. In Windows, the "Esc" key will reject the bar if you are in the search text entry box.

  Keyboard shortcuts:

  • Keyboard shortcuts | How | Help Firefox, Mozilla very limited number of shortcuts but will show correctly for your system
  • Firefox and other shortcuts of the browser (comparison chart), more substantial, but is oriented Windows users with a few guidelines for Mac and Linux users.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.