Can't redirect to another page when you use adfc-config. XML standalone WL

Similar Questions

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After registration and closing a document in InDesign, I can't open it. I've been working and save on Adobe CC. I can't get it back and when you use file &gt; open, it does not appear. What can I do?

  After registration and closing a document in InDesign, I can't open it. I've been working and save on Adobe CC. I can't get it back and when you use file > open, it does not appear. What can I do?

  Hello

  Please send your InDesign file to [email protected] and I'll take a look at the document.

  If the file is larger than 10 MB, you can zip (and password protect) the file download on Cloud creative (or) Dropbox account and send us the link to the document.

  Kind regards

  Latifa Talwar

• Blank page when you use the section in a RTF

  I created a type of standard form with details of travel for each employee, page break on employee. To start numbering pages at 1 at the next employee, I used a section break.
  However, now I have an extra white page on each employee.
  A simplified version of the xml and rtf file can be found here:
  
  http://www2.Potsdam.edu/collinkj/BIPUBLISHER/
  
  It was created with Oracle BI Publisher 11.1.1.6
  
  Any ideas on what is causing the extra page would be appreciated.

  When you use @section it will by default set a new page for each group kept u and also reset page number.

  But in your model, you have used @section and also a jump of page before the end of the loop. delete this page break before the loop-end for each section.

  You must also remove the space after in your rtf model and space after each form field in section

  It will solve the problem.

  Published by: Avinash_Varma on February 11, 2013 14:51

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• 11i Login page shows 'Error on Page' when you use IE 7

  Hi DBAs,
  
  
  I use Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). EBS is on RUP6 and using the JDK 1.6.0_12.
  I'm using Firefox and not getting not any question. I used the first time IE-7 (7.0.5x) to access the application. I noticed that by pressing the button "Login" on the Login Page, it has been said in the bottom left of the EI says "Error on page" and was not navigate to any page or did not perform any action.
  
  I checked all services and everything was OK. When you use Firefox, I was able to navigate through the application without any problem.
  
  Using IE 7, I am able to access
  
  http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin &; password = sysadmin
  
  Most of the stuff seems to work fine when recording using above URLS, but 'GO' buttons throwing same error in IE "error on page". Rest of the Bottons as "Browser Edit", "Edit Favorites" are working very well, but when I push the button 'Go' then IE error display on any Page. It seems to me that when the need for a button navigate to the next page then IE saying 'Error on page' but when a button do lunch a new page it works fine.
  
  All responsibilities and links work properly. Navigation application using Firefox works quite well.
  
  Looking for your advice and suggestions to solve the problem.
  
  Thank you
  -Samar-

  Samar,

  See the following document.

  Note: 810406.1 - request connection with IE7 gives Javascript error
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=810406.1

  Kind regards
  Hussein

• How to prevent large gaps on the Web page when you use the behaviours slide?

  I searched the forums for similar problems with application behavior slide to the elements through the DW CS5 interface and find a useful post titled "problem with Spry Applying"Slide Effect"so now my slide effects works the way I want to, except instead of dragging out a legend after clicking on an image I slip on a list of text items when you click on a section of text.  It works, but there is a gap when the first load of the Web page. How can I remove/avoid this great whitespace to appear?

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > test Document < /title >

  "<!-< script type =" text/javascript"src ="... / SpryAssets/SpryEffects.js "> < / script > - >"

  < script src = "SpryAssets/SpryEffects.js" type = "text/javascript" > < / script > "

  < script type = "text/javascript" >

  function MM_effectSlide (targetElement, duration, of, to, toggle)

  {

  Spry.Effect.DoSlide (targetElement, {duration: duration,:, to: to, turn on/off: toggle});

  }

  < /script >

  < / head >

  < body >

  < p > < / p >

  < p > < / p >

  < style type = "text/css" >

  #LOdiv {visibility: hidden ;}}

  #Countries {visibility: hidden ;}}

  < / style >

  < p > < / p >

  < p > < / p >

  (< div id = "Latte" onclick = "MM_effectSlide ('LOdiv', 1000,"0% ", 100%", true) ">"

  < p > < strong > drop-down list One + show < facilities > < / p >

  < / div >

  < div id = "LOdiv" >

  < div >

  -Item A < br / >

  -Point B < br / >

  -Point C < br / >

  -Section D < br / >

  -Point E < br / >

  -Item F < br / >

  -G spot < br / >

  -Point H < br / >

  -I point < / div >

  < / div >

  < / div >

  (< div id = "ListTwo" onclick = "MM_effectSlide ('country', 1000,"0% ", 100%", true) ">"

  < p > < strong > list two + show < facilities > < / p >

  < / div >

  < div id = 'Country' >

  < div >

  -USA < br / >

  -Germany < br / >

  -France < br / >

  -Italy < br / >

  -Japan < br / >

  -China < br / >

  < / div >

  < / div >

  < span style = "width: 990px;" height: 21px' > < img width = 990 height = 21

  SRC = "image386.gif" >

  </span >

  < / body >

  < / html >

  Hello

  in my opinion, this technique is not designed for the two panels. To do this you must use the "Spry several sliding elements"-technique in which panels will be triggered by the individual buttons. "" Here is the link for it:

  http://labs.adobe.com/technologies/spry/samples/effects/multiple_slides_sample.html.

  Hans-Günter

• Can not get on the internet when you use the merge with WindowsXP

  I upgraded to Fusion 2 and am running Windows XP.  Windows XP has not check when I installed it because I wasn't getting on the internet because of all the viruses that draws windows.  Now I find that I have to check Windows after 30 days.  I can't WMWare to help me after 30 days of free support (which is a bunch of Bull).  Anyway, I tried everything that is listed in this forum and through the FAQ, the s and videos and I still can't get it to work.  Can someone help me please?

  Jim

  JudgeJim wrote:

  Problem: I can not go on the internet whenever I'm on Windows.  My Mac is not a problem with online.  When I start the merge, I agree, but when I start Windows XP, it tells me this:

  Could not open/dev/vmnet8:

  No such file or directory.

  Virtual device Ethernet0 will start disconnected

  Sometimes it will say instead of vmnet8 vmnet0

  If you have found errors like that something is not right.  Have you tried to uninstall/reinstall Fusion? Note: This is not the virtual machine at the request of Fusion.

  I tried which was published for the myers40k (adding ethernet0.virtualDEV = "e1000" to the .vmx file) but that didn't fix it when I restarted merger/Windows (the text .vmx file was closed).

  This is for Windows Vista not XP and you should not apply for bugs for Vista on XP unless you know that it is normal.  So sometimes it's better to ask to be sure before try you things are written to him in a team oriented to a specific operating system.

  I also turned off and reset the network using NAT and bridge under network settings, and from the command prompt (I'm not too comfortable with the command prompt) at the command prompt, my IP address showed this: fe80::5445 etc, but it did not show my correct IPAddress, just this list of characters.

  I have broadband with a Linksys WRT54G Router. I bypassed the router and went directly to the computer. I think it must be in the software because it did not help

  If your router does not work properly, you should be able to use Bridged to network client, but without the router online, you need to set the client to use the default NAT network.  If you change the types of networks while the guest id launched, you must release/renew the IP address.  Restart then comments does this, but there are other means and until you learn what they are just restart the guest of change so that the client is not running or suspended.

  I would start by checking the .dmg against its published MD5 sum file you have downloaded VMware to make sure that it is not corrupt.

  Uninstall/reinstall Fusion and restart the Mac.

  Start merging and then the virtual machine and it if error reports after the exact wording of the message and a screenshot if needed.

  If she has any errors and you can't even access the Internet, then you need to validate the other information requested previously or there is nothing else that I can do without checking the parameters of the information requested previously.

• How do you use the config.xml file to determine which version of an application, a user will download?

  I have two APKs for the same application and I implemented the config.XML of lower version number working for all screen sizes.  The config.XML for the higher version number is set up for only the scresns large and extra-large.  Here's the code from the config.xml file.

  Version 1

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "true".
  	Android: normalScreens = 'true '.
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  Version 2

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "false".
  	Android: normalScreens = "false".
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  When I try to download the app on Google game, only the top version is available, regardless of the size of the unit.  When I asked Google game why this was not behave as expected, they said that the file manifest for both applications is the same.  Here is the code, they shot in the manifest after having used PhoneGap Build.

  < media screens android: anyDensity = "true" android: smallScreens = "true" android: normalScreens = "true" android: largeScreens = "true" android: Center = "true" android: xlargeScreens = "true" / >

  Can someone explain why PhoneGap Build is not using the settings I set in the config.xml file?  And how to fix this?

  The tag is not a valid tag in the config.xml file. This is probably why you see the same tag in two, as the build service is ignorant.

  As to how solve you this problem. Currently, you can not, but the next version of android-cordova will include the ability to add a tag which you will be able to use like this:

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.

• HP Officejet J5780: Stripe yellow towards the bottom of the page when you use the document feeder

  When using the document feeder copy has a yellow stripe down page @21/8 "from the left margin. NO problem when using the tray.

  Hi @GlennG1 and welcome to the Forums of HP!

  I see that you have lines in the ADF.  I would like to help!

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend this document:

  Vertical stripes, lines or streaks on Copies, faxes or scan

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How can I keep my current theme when you use the private window

  I went from using a complete theme for just a regular theme (one is no longer compatible with the 40.0.2 full update). When I open a private window I am presented with the default theme of Firefox with no way to change to one of the other themes that I try to apply. Is there something that I am missing, or was it a change that has taken place through many updates for Firefox, while I was still using the complete theme? I would like to use the theme on windows normal and private is it possible?

  Sorry, it's a 'function' private browsing and using a light theme. PB takes the default theme. Been like that for quite some time now - as can be as far as Firefox 29, 30 or 31.

• Can not get tabs to open when you use the t control or right click of the mouse or from the file drop-down

  OK, so the problem is not able to open new tabs, that I can't open new tabs by using the file drop-down and select it, I can't use Ctrl t, I can't use the button "+" at the end of the tab, and I can't get the right click and select new tab to work. However I can get new tabs by accessing a link on a page right click and selecting Open link in a new tab

  Try to disable or uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar, following a security update in Firefox 3.6.13

• 40 second delay to html5 video fluid page when you use a 5 android phone

  HI, I started to build a www.kernowforestry.co.uk page and the embedded video works well with firefox and chrome, but on my android phone (5) there is a time limit of 40 seconds of the play button. The page has ogg, mp4 and webM, so I'm stuck any ideas please?

  is there a better way to create a slideshow?

  I gave up after downloading the first 23 MB.

  Your video is just too huge for data plans and the relatively slow connection of phones not LTE.

  Personally, I wouldn't offer it even on a phone (setting containing video to display: block, so it's not an option to download). Maybe give a text link and advise them that it will take a long time on the non - LTE connections.

  If all you are doing is a slideshow, forget the video together and look in "jQuery Slideshow plugins. They are much better than trying to offer the same thing through

• Adobe Acrobat Pro XI scrolls a page when you use the pen

  I am currently using a surface that has been provided to work the stylus provided on windows with installed 8.1 Adobe Acrobat Pro XI.  Whenever a customer sign and cross a T in a certain way, it will be either scroll the document upwards or downwards (depending on how they are crossing the T) a page.  Who, after several pages of can get quite irritating.  Does anyone know how to fix this, please?

  Hi Preston,

  Check Mode Touch preferences for tablets & mobile phone. Refer to this document KB Acrobat help. Display of PDF files and preferences.

  Kind regards

  Nicos