4250 - SX: use two control ports supported or not?

Similar Questions

• Aggregate bandwidth of Sg500 two stacking using two stacking ports?

  Is the 2 Gbps of bandwidth when you use two stacking ports to connect the two switches?

  Two if you want that quick failover. Otherwise, a failure of the link will lead members of the dislocation pile. For the SG500, they go on S3 and S4. On SG500X, they go on S1 and S2.

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• using Windows vista and supported will not start

  Windows vista help and support will not start. Is it possible to download and re - install this feature.

  In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.

• How can I use the USRP to record a signal using its two RX ports simultaneously?

  Hello.

  I am trying to record a signal using two antenna cone. The reason that I need two antenna to cover the bandwidth (DC - 6 GHz). a single antenna covers DC - 300 MHz and the other covers 300 MHz to 6 GHz. so I need to use two RX port of USRP at the same time to record the signal. I have two questions:

  1. is this all USRP market capable of covering this frequency range?

  2. is it possible to use the two RX port at the same time to the signals of the records I described? If this is not the case, how can do?

  P.S. I have two NI2920 USRPs and two USRPs N210 in my lab.

  Thanks in advance for your time.

  Sam.

  Hi Sam,

  To answer your first question, the USRPs you can reach the bandwidth you want. There is not a USRP, to my knowledge, that can reach this range in a single device.

  Also note that you can only use RX convened for two different ports at the same time using LabVIEW and the pilot of the USRP. If you want to use the two lines of RX, you will need to run a session with a single line, close the session and then start a different session for your second RX line.

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• Use of ISE 3355 device of the two GigE ports

  I'll put in place six ISE 3355 3 devices in a data center in another 3. They just installed a new infrastructure of server using 5596 Nexus and Nexus 2248TP farm top of rack switches.

  I am looking for documentation on how to make the collection of NETWORK adapters on the way 3355 or some connect Gig0 to FEX101 and Gig1 to FEX102. Or simply set up a channel using LaCP port between the two different groups of FEX?

  Sent by Cisco Support technique iPhone App

  Hello

  This is not supported, you can not team or balance the load or use redundant interfaces on devices of the ISE. You can only use a span port dedicated for ISE deployments, or use the links to crossover to a deployment ipep in HA mode.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• What is the right way to use variables controlled by the two buttons and programming?

  First of all, I apologize if this has been discussed before.  I know not how to phrase succinctly the application, so maybe I just missed the search terms.

  We have several pieces of the Labview software in the laboratory that automatically control things like the taps and heaters.  Sometimes we also manually control these same things.  I'm moving old NI PCI (and older versions of Labview) maps to a variable and based on compactRIO system shared network.  However, I'm still not on best practices to achieve.  I need to be able to have a script running at any time control panel so that I can access, for example, a valve controller (which is just a Boolean), and I need power open and close the valve by programming other scripts.  I need, of course, the control panel to track the State of the valve until it opens another script, the Panel indicates that it is open, and the next push on the control panel it will close.

  Historically, this has been processed using structures business to move from a "computer control" and "hands-on" with global variables that define the State of the valves.  Of course, this is not recommended.

  So far, I've played with the help of two variables, a status of valve and the other for the State of button.  The Panel configuration then loops, reads the status of the valve and puts the State of button if the State of the valve has changed.  I can do this with registers at offset or with the structures of the event, but anyway, it gets very crowded and seems inefficient.  Is there a good way to do this in Labview?  It seems this is a common problem, so I hope there is an easy and elegant solution that I've missed.

  Variable published use shared network.  Your scenario and your manual of the interface and change the variable and then shared your cRIO reads fair value and writes the appropriate values.

  Now for a cool part.  On your manual interface, right-click on your heart control that you want to use to control the shared variable and go to properties.  There should be a data binding tab in the Properties dialog box.  You can bind a control/indicator to a published network shared variable.  So this button will always be attributed to the current state.

  Your script should just read the shared variable before resuming to verify that it is in the correct state.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Two headphones can use the same ports? Or is there an exception with RAC?

  I was under the impression that the two processes of the listener cannot use the same port. But, how to scan LISTENER_SCAN2 and LISTENER_SCAN3 headphones use the same port 1628 in the RAC hump178 node?
  
  
  

  $ srvctl config scan_listener
  SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1628
  SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1628
  
  
  
  $ srvctl STATUS SCAN_LISTENER
  SCAN Listener LISTENER_SCAN1 is enabled
  SCAN listener LISTENER_SCAN1 is running on node humpy179
  SCAN Listener LISTENER_SCAN2 is enabled
  SCAN listener LISTENER_SCAN2 is running on node humpy178
  SCAN Listener LISTENER_SCAN3 is enabled
  SCAN listener LISTENER_SCAN3 is running on node humpy178

  These 2 listeners, according to the ouput srvctl above runs on the humpy178 RAC node that has 1 single public IP address. It's just a normal (standard) 2 node RAC configuration.

  Listeners in cluster environment using virtual IP addresses.

  You can check it out yourself:

  lsnrctl status LISTENER_SCAN2
  lsnrctl status LISTENER_SCAN3
  

• How can I build a table using two digital controls and a button? Whenever I press the button, a column of 2 lines (digital orders) should be created.

  I tried several ways to date.

  I know that I can use the building to create a table of two numbers but I am not able to create a 2d in this way

  I also tried to use Replace subset of table, but still it won't work.

  I know that I have to use a table that has the index of the column starting with 0, so whenever I press the button of the column index incriments by 1 so the next column will change but I am not able to create this.

  You are the authority on what a Altenbach! He writes, I just did to make it work. Don't really consider this. Here's a modified version for the OP to use should he like:

  

• Can Tecra M10 - 10 H - I use two screens?

  Hello

  Looking for an explanation.

  We just bought some new laptops Toshiba M10 - 10H, previously, we used the M9 and had no problem with setting up two monitors by plugging in 1 DVI port and 1 on the VGA port on the port replicator. It does not seem possible to do on a M10.

  We have drivers installed on the M10 for Intel G45 express chipset and don't use model Toshiba Express Port Replicator. PA3508E-1PRP.

  Is it really the case that you cannot configure a M10 with two monitors, it seems to be the case, but seems porr mobile most recent higher spec of the M9 is not able to do this?

  Thanks for any advice.

  Hello

  This feature depends on the Tecra laptop opportunity.
  The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
  If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

  Both the use of a DVI and VGA port is so not possible!

• Satellite C660 - two USB Ports without function (bad connection)

  Hello, sorry for the worst English.
  Historically, the touchpad of my Satellite C660-220 used without operation, worked with a mouse of radio. Now, two usb ports can only be used under certain conditions. Can I replace the connections for this part (motherboard / motherboard) for example, a computer used toshiba laptop? Where can I read, one of which models the parts required are the same as well?

  Best regards from the Germany

  Bert

  Hi Bert

  I guess for you that it is quite simple. Problem is that this repair is not supported, and all we can try it on its own, including all the risks of damaging something.
  > Where can I read, one of which models the parts required are the same as well?
  This kind of document is not and if it has information that is not for public use, but for only authorized services.

  Theoretically, you can find the same mainboard with damage CPU or GPU and use parts from there.
  Believe me it is not easy to give you some good advice on this subject.
  Out of curiosity, but you have some experience with these things?

• HP Envy Phoenix 850: Using two monitors

  I just updated my PC and bought two HP monitors.  Specification PC says he can support up to three monitors.  I'm not sure is how exactly to set up two monitors:

  -I.e. the ports to be used at the back of the PC.  I have an HDMI cable, but it seems that to adapt to one of the ports - yet there are 3 others in the back of the PC;

  -Sounds like a silly question, but there are 3 other major ports at the back of the computer, are these a different type of HDMI port.  The monitors that I bought the HP Pavilion 23xw will have VGA and HDMI (the rear ports are labeled HDMI 1 and HDMI 2).

  As noted, it might look like a very stupid question, but I can't find any help online to detail the ports on the back of my graphics card.

  Hello

  He did 3 display ports, 1 HDMI port and 1 DVI port:

  http://support.HP.com/in-en/document/c04714105

  You can use 1 Display port and HDMI port 1 or 1 HDMI port and 1 DVI port the port on which you have on your monitor. This video card can connect up to 4 monitors.

  Note: Info Display port (DP)

  https://en.Wikipedia.org/wiki/DisplayPort

  Kind regards.