4300 SFF, 600 G1 SFF, SFF-8200: mousepad

Similar Questions

• Transplanting hard HP Elite SFF 8200, 8300 and vice versa

  Some time ago I asked a question on the transplantation of the hard drive of my HP 8200 desktop computer for my new HP 8300.

  As suggested, I installed files to controller hard drive before the drive, and almost everything seemed to work fine. (Windows installed some additional drivers after training has been installed).

  The operating system recognizes the new serial number etc, but HP Support Assistant still thinks it is installed in an HP 8200 machine. This caused a problem or two becauseHP support help has tried to install a new update of the BIOS for the 8200, which of course will not work.

  I have installled the hard drive of my new 8300 in the 8200 and run Setup from there. This has caused fewer problems but still think that it is installed on the 8300!

  I assume that there is a file that identifies the operating system of the machine. Is it possible to edit this file, or replace the file with the correct version?

  Nigel.

  I try to uninstall HP SA, reboot the machine and then download and install the latest version of HP SA.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.UfHy9irD-Po

• Desktop HP Compaq Elite SFF 8200 - SDM "this particular model could not be matched" - why?

  

  The cause is described here: t5/HP-SoftPaq-Download-Manager/FAQ-20-quot-This-specific-model-could-not-be-matched-All-models/td-p/5317159#. Ud7wQvMo5jE

• Disable on-board video hp 4300p sff

  HP Pro 4300 SFF desktop computer.

  B5Q06UT #ABA

  Windows 7 Pro (32 bit)

  Jaton NVIDIA LP-DUAL VGA PCI GEFORCEFX6200 installation

  during the system display shows boot bios the card Nvidia, then perpetually restarts.

  Open support with Jaton / Nvidia - advised to disable video onboard bio PC but can't find this option in the bios

  Please notify.

  Hello:

  BIOS of switching is automatic when a PCIe card is inserted in your model.

  Try resetting the CMOS.

  If you continue to have problems, I would have to suspect that the nVidia card has a problem.

  I have an Elite CMT Business Office 8200 PC.

  I installed a Radeon HD 6570. It is plug-and-play.

  Paul

• 8200e graphic sff updated card?

  Hello

  Can someone tell me how big a graphics card can I put in a HP 8200e SFF?

  Is the system locked to standard som HP graphics cards or can I put with any card I want?

  Thanks in advance :-)

  Concerning

  / Bass

  Hello:

  I recommend that stick you with the video cards listed as supported for your Elite SFF-8200.

  240W power supply does not manage much more.

  Supported video cards are listed on the link below on page 14.

  http://h18000.www1.HP.com/products/QuickSpecs/13879_na/13879_na.PDF

  If you would rather try another map those listed that would work with your P/S, then it may or may not work.

  They are not necessarily locked work.

  Paul

• 8300 elite SFF: 8300 Elite won't USB flash drive boot

  Elite Mini PC 8300.  I made a bootable USB key but cannot get the Menu of boot or boot order configuration in the BIOS to see the player.  Exactly the same as in this other thread pending: USB not available in the Start Menu

  In 'Device Configuration' (BIOS) is listed, it does NOT appear in the Boot configuration order, even if I save changes and reboot.  I have disabled UEFI and Secure Boot, activated Legacy BIOS, I intend to install Windows 7 x 64.  When starting I press F9 or ESC to display the start menu and the USB key is not listed.  All USB ports are enabled.  Tried the ports front and rear (except USB 3.0 those W7 with no support from the other drivers for USB 3.0).  I tried he prepares with Microsoft USB DVD Tool and Rufus.

  The flash player has worked well with several other PCs.  for example I have HP Pro 4300 SFF and the flash player starts without a problem here it is configurable in BIOS and select from the Start Menu.

  First attempts on Elite 8300 was with BIOS v2.99.  But I also tried after update BIOS to v3.03 because release notes made remarks on improving support USB, but there was No change even problem.

  Take the battery CMOS press switch reset CMOS on the systemboard put the CMOS battery, restart the device to fix a date and time in the BIOS and check if this is useful.

• HP 8300 Elite SFF hard disk transplant

  I currently have a HP Elite SFF-8200 and two hard drives set up with all the software work properly. I would rather have to do it all over again if I can!

  I have come to take delivery of a new 8300 Elite SFF and I would both the 8200 HARD drives, transplant (and will do a fresh install on the 8200 at the disk in the 8300).

  Both are running Windows 7 Professional x 64.

  Is this likely to be a problem?

  Nigel.

  You are the very welcome, Nigel.

  If you want to go through with the attempt, here's what you need to do:

  On the 8200 Elite...

  Download these files (first download what you want). Extract them to a folder where you will browse for them later.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3449 & DwnldID = 22194 & Keyword = Intel + Rapid + Storage + Technology +(Intel+RST) & lang = fra

  Go to Device Manager, then click on IDE ATA/ATAPI controllers section.

  Click the Intel Desktop/Workstation SATA AHCI controller. Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software.

  Click the let take Me a list of drivers for devices on my computer.

  Click the disk button.

  Find where you saved the driver files that you just downloaded and select the Intel (r) 7 series/C216 Chipset Family SATA AHCI Controller in the list.

  Follow the rest of the guests and should install the driver. Now, do not restart. Shut down the PC and install the drive in the 8300 and hope that it starts.

  If this isn't the case, then you need to reinstall W7.

  Paul

• HP Compaq Elite 8300 SFF: Block power Hp Compaq Elite 8300 SFF + graphics upgrade

  In my work asked me to provide five computers capable of video editing on Adobe Premiere PRO 5.x. What I have are available 8300's, with an i5 650 and 4 GB of ram.  I'm looking into upgrading to fulfil the task a bit better, but as an NGO, we work with a very small budget, which is why recycled desktop computers.

  What I wanted to put in a new graphics card and some more ram, however, it seems that the supplied 240W PSU don't deal with that.

  So my options are:

  Run a very low power, small footprint GPU on the original, such as power supply

  http://www.Palit.com/Palit/vgapro.php?id=2392&lang=en&PN=NEAT7200HD46-2080H&tab=SP

  or

  https://www.msi.com/graphics-card/N730K-2GD5LPOCV1.html#hero-specification

  It might also be possible to operate a full card large saving in energy and just cut a hole in the lid of the computer, although I've yet to find a good alternative.

  Another option, I'm hoping to notice is the upgrade of the PSU itself. In the partsurfer, I find that the SFF-8200 has power 320W, PARTNO 613765-001

  Although I don't care there IN the case, I need to make sure it works with the MB. It may be possible to execute it (or another more powerful PSU) as well as a better graphics card.

  Thanks for your thoughts and ideas!

  F

  The most serious problem is the limited on the slot to power. It's on the SSF 25W.

• sound via display of an elite 8200 port does not

  Hello, we have an elite sff 8200 with WIN 7 x 64 but we are not able to get sound display port. How can we solve this? We have only one option in the sound Setup. We get the image on the display port, but not his... According to this post (LINK) , it should work!

  No, HP could not solve the problem. We bought a graphics card small footprint for the PC with a HDMI Port built in, that solved the problem of noise...

• HP dc7900 Small Form Factor: «Graphics querry»

  Hello:

  I have a pc hp dc 7900 shape small factor. I would ask what graphics card is supported on this device close to 1 GB.

  Please specify precise model of the graphics card as well as the brand because it's a desktop pc.

  Thank you.

  Kind regards

  Mohsin

  Hello:

  I would go for the Radeon HD 6450 profile low with flat card, which is the graphics card in option on the Elite SFF 8200 with the same power 240W.

  This one, if you can get it where you live.

  http://www.Newegg.com/product/product.aspx?item=N82E16814121439

• Ability to burn a DVD with factory WIN7 Pro 64 from a USB?

  Recently bought a Compaq Elite 8200 SFF, after a few hours of use that I urged to create a WIN7 DVD factory as soon as possible. Had only DVD - RW empty records at the time (not good to burn the file WIN7), so I chose the alternative of the installfile from the factory on a USB and burn the DVD from the USB key later. My 8 GB key was little short KB of space, so I used a key to 32 GB... However, this does not work, the file WIN7 does not appear on the USB key (even if I enable hidden files). Maybe something was wrong, during the copy process because I can not boot from USB with the factory alleged WIN7 version, however, check the USB shows that about 8 GB of space (corresponding roughly to the drive WIN7 factory) is "occupied" by something. I´d like to use the 32 GB key for other purposes. However, the files on the USB factory settings are corrupt, or it is not possible to make a DVD (license problems?) once the default WIN7 was copied on the USB key? Any ideas?

  Hello:

  Unless your specific PC came with a bunch of software such as MS Office 2010 that you paid for a license and other software, all you really need is to be able to reinstall windows 7 on a new hard drive or your existing, correct?

  All drivers and most of the software except for CD and DVD burning programs are on the support page and driver Elite SFF 8200.

  So, all this...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can then get a portable hard drive and after installing all of your programs and drivers, etc., you can use the windows backup tool 7 and create a system image that you store on your portable hard drive. You can update this image any time you want and if you need to reinstall the operating system for a reason, you plug your storage device USB with the backup to this topic image, you use the W7 DVD do you, boot from it, select Repair in the lower left corner of the Setup screen , select restore backup, that it points to your image on the device of portable storage and you go.

  Worst case scenario, is that you will always have your installation of W7 plain DVD you did, which will install on any size of HARD, including an SSD drive.

  You can test that the DVD you made work by starting her and just do not proceed with the installation.

  BTW, you can install up to 32 GB of memory in your PC.

  Paul

• HP ProDesk 600 G1 SFF: HP ProDesk 600 G1 SFF: HP Support Assistant is not able to download updates

  Hello

  We have two identical computers HP SFF ProDesk 600 G1 running Windows 10 (64-bit) with the latest Windows updates installed. On two of them today, I installed the HP Support Assistant. The version information of the help Wizard says:

  HP Support Assistant: 8.3.27.17

  Framework: 12.5.26.37

  Configuration files: 8.0.6294.2155

  Contact information: 37386108

  All updates to the support Assistant software have been installed on both machines.

  Everything on one of the computers in Office Support Assistant works very well and can download and install the updates that are available on the other machine, the update process stops before downloading updates with the following screen:

  

  Several rounds of uninstall/reinstall (with reboots after each step) did not help to remedy this problem.

  Any advice would be greatly appreciated.

  Best regards, Hans-Georg

  Hello

  by an another uninstalling the adapter Assistant and framework support (with deletion of all stored data) and resettlement after the problem could be solved.
  Best regards, Hans-Georg

• ProDesk G2 SFF 600 HP: HP ProDesk 600 G2 LTS cannot boot from USB or DVD

  We have 50 HP ProDesk 600 G2 SFF pcs and we need to install Windows 7.i can't boot from usb or DV.

  Please can someone advice me what to do?

  Thank you.

  Hello:

  We must go into the BIOS, turn on legacy mode and disable secure boot to install W7.

  Then you must also run this tool to set the USB3 drivers in your W7 usb flash drive.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• HP 8200 elite sff second monitor "How to enable.

  I checked all the documents on the website of HP but still can not find how to connect and allow the second monitor BIOS for hp 8200 elite sff? Or where is a user manual?

  Again, the computer is a model of enterprise class regardless of its use in a domestic environment. Many computers of class business use specific hardware environment and is not generally used in a domestic environment. Again, can be best answer to your question in the HP Business Support Forum.

  To get help without going through the business forum... According to the specification, this model supports a legacy of VGA analog channels and a modern digital DisplayPort port. Two of these ports get their signals integrated Intel graphics subsystem. The DisplayPort port will require an adapter unless the monitor has also a display port. If the computer has been ordered with an alternative graphics or one card has been installed everything changes.

  Please provide a photo of the back of your computer, showing the VGA port and all ports nearby. Also provide brands and models monitors that you are trying to use with this computer.

  Please send Bravo

• G2 600 SFF: Question on Windows 7 Pro + license 600 G2 LTS Pro Windows 10

  Hi, I recently bought a 600 SFF G2 which was provided with Win7 - 64 Pro, but which was supposed to include a license to win 10 Pro. The device comes with a DVD of Win7 and a HP DVD driver, but instead of a Win10 DVD or license, they included a phamplet who said I was eligible to receive a copy of the recovery of Windows 10 media and HP driver support. I was insutructed to save my computer and ask my copy. I registered my computer, but it wasn't at all clear as to how I could get my copy of each media (driver Win10 and HP). Can someone give me a link or URL that will allow me to get these media (which I assume must be free of charge)? And the Win10 Pro OS will have its own key, or is the key to good machine for Win7 Pro and Win10 Pro? Any help would be greatly appreciated because I was told initially that they would be included in my PC:

  "This system is pre-installed with Windows 7 Professional (64 bit) software and also comes with a license and support for Windows Professional 10 software (64-bit)."

  Thank you

  -Ken

  Hi @Replytoken,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.