4580 all-in One Printer connects to the router

Similar Questions

• The jet office 4315 all-in-one: printer plug on the Tablet?

  I have an apex Tablet and I would like to know if there is a way to connect my all in one printer for her so I can print from my tablet, I have a cord to hang them together but I'm assuming that could print from the tablet should I make the tablet to recognize the printer & I don't know how to do this. I used to use it with my desktop computer

  Hello

  Only a connected network printers are supported on a Tablet, the 4315 is a single USB printer and it is not supported by such a.

  Kind regards

  Shlomi

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• 4280 all-in-one printer connection problems

  I can't hang a F4280 all-in-one printer at a Pavilion a1223w PC.  I always get a command prompt which does not recognize the USB connection.  Can anyone help?  Thank you!

  No luck with that - I tried all USB ports and under tension on the cable, but still no connection.  The prompt says "Windows does not recognize USB" any other ideas?

  Thank you!

• C4750 all-in - One Printer: software for the printer driver removal

  Hey guys!  I was hoping that someone could help me with this package to uninstall.

  I have installed this package on the next page, but really don't need all this: HP Photosmart C4700 all-in-One Printer series full feature software and driver.  Now, because my computer is a bit slow, wanted to uninstall what is not necessary.  I hope soon will get some components better and won't have to worry as much speed.

  I want as little as possible on the left above, just need to print wireless, scan and the volume of ink.

  1. wireless

  2 scan

  3. set the Volume of ink

  I'll do the kidnapping with Revo if can just get some advice.  Don't really want to uninstall each thing if not unnecessary.  The question is, some drivers are hidden, and I do not know in which package they belong.  If this isn't common knowledge here just to uninstall each thing.

  I'll try to insert a picture to show what I left, because I remove some of them already.  Thank you! the love of my HP

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4700-all-in-one-printer-series/379461...

  

  Welcome @pcpunk,

  Thank you for your participation in the forums! I see that you would like to know what else you can uninstall the printer without affecting the wireless, scanning and adjusting the Volume of ink. Thanks for providing the screenshot. I'd love to help you.

  You should be able to remove the following text:

  • HP Customer Participation Explorer.
  • HP Photo Creations.
  • HP Smart Web Printing.

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• HP deskjet 3050 J610: printer connected to the router

  How can I connect my printer to my router using an iPad. I downloaded the HP print remote app. I don't have access to the router so can not use the WPS button.

  Hello

  You may not use the iPad to connect your printer to the router. You cannot access your router, then most likely you can not connect. The router comes from your neighbor's House? You must Access the printer or at least you have a computer that is connected to this router. If you want to print, direct wireless can help:

  http://WWW8.HP.com/au/en/campaigns/wireless-printing-Center/wireless-direct.html

  Kind regards.

• E 7520 HP All - In - One Printer: turn off the power to the wireless printer

  I have not printed for a few days I have not noticed if my Wi - Fi connection worked.

  I tried to print wireless today and got the error message that the printer was not connected to the internet.  I tried to go wrong, but it did not help.  I checked the connection to the wireless router and put the password in.  It has not yet recognized it.  I tried to disable printing for my smart phone (I think it is called), but the screen froze on the circle showing the progress.

  I tried to turn off the printer with the power button, but that no longer works.

  The Wi - Fi light just keeps blinking.

  How can I disable the printer may reset?  Or can you help get my printer to recognize my wireless again?

  Thank you.

  Hi Rhonda, there.

  I would suggest to unplug the power cord from the printer without turning it off with the switch, it will do a reset without getting rid of all the parameters. You simply leave unplugged for about 1-2 minutes to clear out any power.

  I recommend then reconnect, and doing as much as you can from the guide below:

  Printer keeps no connection Wi - Fi

  Good luck and let me know how it goes

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Officejet 4215 all-in-one: print queue of the printer

  The pqtestpage.png is stuck in my queue of the printer and shows the deletion, but nothing happens and I can't print anything until it emerges.  I tried to restart but it did not help.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• HP Officejet 6210 All In One prints only on the left side of the page

  After good results, I tried to print a "retail Transaction" of Quickbooks account form twice with the same result:

  info. prints only on the extreme left, a straight line down...   I did adjust the paper tray.  What could be wrong?

  Thank you for your time and your advice.

  Texas-sleeper

  Salvation to the texas-sleeper,.

  I understand when you print from Quickbooks print right on the left side.

  I'll be happy to help you.

  In the program you are trying to print from, click file and then click on print. The print dialog box opens.
  Select your printer, click printer properties or properties.
  Click the paper/quality tab.
  In the press or type click on the dropdown menu, select the type of paper that matches the paper loaded in the paper feeder and the desired print quality, paper size, select the correct size of paper.

  Make sure that the appropriate paper size is also selected in Quickbooks software.

  Try printing a different file where this file is corrupted or damaged.

  I have provided a document of Quickbooks print does not correctly.

  Solve common printing problems.

  Try printing from another application to see if there a software problem with the printer or application you are printing from.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!

• Photosmart all-in-one printer: loss of the network printer connection

  My wife has worked with verizon until our internet high speed - it was realized from wep to wpa2 - it has helped our speed but now the printer does not connect to our network eventhough our network name and password are correct. How can I get this fixed?

  bobnall wrote:

  My wife has worked with verizon until our internet high speed - it was realized from wep to wpa2 - it has helped our speed but now the printer does not connect to our network eventhough our network name and password are correct. How can I get this fixed?

  Most likely, you will need to re-run the installation of the network.

  Since you changed the encryption WPA2, the printer needs to know this!

  WyreNut