4280 all-in-one printer connection problems

Similar Questions

• E-all-in-one printer WiFi problem 3520

  Product name: 3520 e-all-in-one printer

  WIFI problem ofline whenever we want go print

  I bought a HP 3520 printer e-all-in-one, cause it can print ussing WIFI. But I am very satisfied! Whenever I want to print, the printer go to ofline and is not able to perform the task of printing sent from my laptop. On my laptop, I have windows 8 and I installed the right driver. Yet he expect regeister once more my printer and install the driver all over again before finally seeks to print. For me with the amount that I have to print this is does not work!

  I'm regretting that a lot i let the salesperson talk to me by buying a Hewlett packerd. Because I have this printer now a little more than six months and already want to trow I have a very high roof. Previously I also had bad experience with a Hewlett Packerd printer!

  Hi idebont,

  If you haven't already done so, please run the PSDR.  Find and fix common printer problems using the tools of diagnosis HP for Windows?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  This ensures that the printer is full on and can help this situation.

  We need to know if the printer or router is to lose the connection.

  You have a flashing wireless to the printer when you try to print from the computer or is the light solid?
  If it is flashing then the printer tries to find the network.
  If the light is solid, it is on the network. Try to print from a mobile device, if they are configured at the printer.

  Print a configuration page to see if the printer has a valid IP address.

  Printing a Network Setup Page.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  You can access the Web server integrated for the printer when the printer is in offline mode on the computer? (EWS)

  If you have a valid IP address and you can access the Web server integrated for the printer, then perhaps changed the IP address assigned to the printer to the router. So the origin of the computer does not find the printer. (setting up a static IP will solve this problem)

  Check the port showing on the computer to verify that it matches the IP address of the printer.

  Go to start, devices and printers, click right on the printer and on the left, click printer properties, select the ports tab.

  Click on configure port to display the IP address.

  If the IP address does not match, and then create a new port with the new IP address.

  Close the port to configure.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• B1110 HP all in one printer sc: PROBLEMS SCANNING ON MY HP B1110 ALL in ONE PRINTER AS SETUP NEW PC WINDOWS 8.1

  Since the installation of my new pc windows 8 my hp b110 all-in-one printer not scan and when the bottom lines of the text of my printing pages are cut and do not print

  Hi year54,

  Welcome to the HP Forums.

  I see that you are having some printing problems.

  I wasn't able to find the model of the printer you are using.  If I can better help you, please respond with your printer model number:
  How can I find my model number?

  Thanks for your time.

  See you soon,.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

  Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

  Tried the Canon support? That would be my first port of call...

• 4580 all-in One Printer connects to the router

  I get the following message when you use the HP printer installation disk that came with my 4580 all-in-one...

  The PC and the printer are connected to different networks.  They must be connected to the same network.  This can occur when you use the manufacturer's default network (SSID) name...

  She claims that my IP address do not match to the top on the same network, etc...

  Is it possible that I can change this manuelly?

  I have a Linksys WRT610n wireless network

  I'm not able to share the printer on the network as my household uses laptops...

  I saw this problem coming before in the forum, but have yet to see someone with a real solution. I spent 3 hours on the phone with HP tech and even with a remote office, he could not remedy the situation... it was several months ago and I tried to do, but I can't ignore it any longer.

  I'm on a WPA encryption... and isn't that although emissions of routwer in 2 widths of band... they have different names... casa big and jones...

  BUT! problem solved...

  Just by chance I have reset the printer wireless settings by default and re-established the connection settings using printing software provided

  Under the software disc menu, click 'Add a device', NOT 'reconfigure the network "... HP has done a terrible job in the description of these menu items when you hover over them... most people gloss over and click without even noticing the nuance of the topics...

  Anyway after doing this it worked... I think that the problem occurred before because that my printer kept a previous router settings and software HP could not reconfigure the IP address of printers...

  (1) Remove HP printer in the menu printer on your PC

  (2) connect your printer via the usb port

  (3) Insert the disk, then go to add DEVICE

  (4) follow the instuction to add a WIRELESS NETWORK

  (5) it should see the printer in the search...

  (6) the rest is self explanitory after all that...

  (7) add other computers using the disc after that because the IP address settings will be defined and all additional computers must do is to install the drivers and locate the printer on the network...

  All that and HP Tech couldn't do that for me, in 3 hours on the phone over the interfacing of remote desktop. So please add this to your ideas of troubleshooting for any future reference. Nevertheless, I love my products HP, we have 3 laptops and of course the printer.

• HP J6480 All in One - Scan connection problem

  Cannot connect the component analysis to my HP Envy - Windows 8.1. I have never been able to connect to this total scanning printer to work with my laptop either. The message: no Scan option - refer to device documentation to troubleshoot. The printer comes with separate instructions for printing, fax, but no information of scan.

  Hello Shananaruns,

  Welcome to the HP Forums.

  I see that you have a problem with scanning.

  It seems to me that it would be possible that not all software has been installed.  One step, you can try is to run the HP print and Scan Doctor.

  If this does not resolve the problem, I suggest when we uninstall the software and drivers, then resinstall by clicking on the following link for HP Officejet full feature and driver software.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

• Re: scanner failure hp 4280 all in one printer scanner copier

  Can someone help me please?

  I have a HP Photosmart C4280, which will print but will not scan when you use it with my Mac from Apple.

  I looked at different positions and have installed, removed, re-installed.  The Mac sees the printer and the scanner sees too.

  This morning the printer decided to print in miniature so that everything I print you need a magnifying glass to read. It's so aggravating circumstances.  I tried to solve this problem, but have failed miserably.

  Any suggestions would be welcome.  Thank you!

  

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• "Out of paper" message on C 4280 all-in-One printer

  Dear HP support,

  I use an Apple iMac around 4 years.  It uses OS x 10.6.8.  And the version of the HP printer utility software: 5.8.0 in conjunction with the software HP PhotoSmart C4200 series supplied with my printer.

  After turning on my Mac and turn on the printer, I hear a sound of wrinkle the paper.  With the help of my manual I opened the front and back panel to get a paper stuck; None is visible.  As directed by your video website on my printer, I checked the print rolls in the back and they are clean and free from rolling.  The "2nd set of reels deeper inside mentioned in the video do not seem to exist in this printer model I've seen no where in it with a bright flashlight.  The rollers on the rear door printer are also free - ride clean and 'elastic '.

  I tried to print a Test sheet using the HP utility.  Loaded into a sheet of 24 lb paper ordinary inkjet hammers I always use.  Pushing in gently until it stops as always.  Then click on the "Print test contact" button on the screen.  Then received on the printers screen and on my Mac is a message "on paper."  No printing.

  Check my printer printing is not paused there either and there is no jobs waiting here.  In addition, according to the video on HP page my printer, I did a printer power cord removal, reset for 30 seconds.  The printer came back later and didn't report any errors.  Tried to print the Test Page using the above procedure previously; no impression and got the "Out of paper" message again.  Please note that I usually ALWAYS print just a sheet at a time, rarely even 5 sheets in both.  Yet he refuses to start.  This makes printer as usual noises when turn on so I know not the printer is not "dead" or locked inside.  It CAN Scan photos in files, even if it cannot print anything.

  At this point, I think I've tried all that a consumer can do as well as anything in the manual and video.

  Any ideas or suggestions?   BTW I DID do a search for this problem, especially for my printer model and found nothing.  I don't know if all other HP printers are similar to my model so I don't know if their corrections apply to my model.

  -M. "Rob" Barnett

  I have the same problem with my printer and rady to abandon

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• All-in-one printer, HP Officejet 4620 blocks the laptop HP dv7t-7000 Quad Ed

  I have a HP Officejet 4620 all-in-one printer connected via USB to my laptop HP dv7t-7000 Quad Ed. This printer makes my laptop BSOD. Reloaded the driver and the problem appears after some successes of print jobs. Help, please

  Hello

  The port marked as number 4 is a USB 2.0 port , while the number 3 is a USB 3.0.

  

  Kind regards

  Shlomi

• HP 6110 All in One printer will not scan to PC applications.

  I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

  Any ideas?

  Thank you

  ... WSF

  ... WSF

  WSF,

  Can scan you from your pc to the 6110, using the hp scanning software?

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.