4630 HP for Mac: HP 4630 for Mac printer will print but no departure will scan
4630 for Mac HP printer will print but will not scan. New & installed software that recognizes the print configuration and computer. When ask to scan get message see this "scan to PC". Can't find where to put "scan to computer".
Thank you
Hi @venny1,
Welcome to the Forums of HP Support!
I see that you are unable to scan to your Mac computer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
To activate the scan of the computer, see the procedure below:
Restart devices and check the settings of scanning driver
Restart the computer and the printer can restore the connection scan options analysis, and then check the settings for scanning on the Mac.
Turn the printer off.
Make sure that the printer power cord connects directly to an electrical outlet and not by a limiter the power strip or surge protector.
Close all programs currently running on your computer, and then shut down the computer.
Turn on the printer.
Turn on the computer.
On the desktop, double-click Macintosh HD, click Applications, click the Hewlett-Packard or HP folder, and then double-click the HP utility.
NOTE: If the HP utility is not in the folder, go to the step install the software for your printer HP.
Under scan settings, click Scan of the computer, and then make sure the enable scanning to computer checkbox is selected.
Try to scan.
If the error persists, proceed to the next step.
Follow all the steps in this guide, if this problem persists:
I hope this information is useful. Please reply to this message with the results. Good luck!
Tags: HP Printers
Similar Questions
-
original title: printer drivers
I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.Hi michelledumont,
Follow the steps in the article.
Resources for the resolution of the printer in Windows XP problems
For reference:
How to install a printer driver locally for a remote printer in Windows XP
-
Why do I need to reboot between print jobs? I downloaded a patch for my printer, but it did not help. Print jobs appear in my queue of the printer but does not print until I reboot between each job.
I downloaded a patch for my printer, but it did not help.
Hello
This patch you downloaded and whence?
I suggest that you do the following:
Go to your printer manufacturer's Web site > key in your printer model number and operating system.
Uninstall/reinstall your printer using the latest drivers from here your operating system.
Most of the manufacturer will also have troubleshooting steps for you to take registered there, too.
This can also help you:
"Solve printer problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
"Solve printer problems.
In the upper right corner, select your operating system from the menu drop-down.
See you soon.
-
Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?
Contact HP support.
http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251 -
Workaround for users Mac OSX 10.9.4 that can not scan
Recently, I upgraded my Mac Mini with OSX 10.9.4 and were unable to scan using the Scan button on the printer all-in-one Deskjet 4400 (I've updated all my Apple software). I accidentally found that if I go to System Preferences and click on printers and Scanners, I can click Scan then open Scanner and can scan from there.
It is not the easiest way to analyze, but at least I am able to scan. Hope HP will soon find a way that it will work only with the Scan button on the printer.
Hello
Full features software is not available for your printer for OS X Mavericks, I regret to inform you that such an is only available for newer models and won't be available for your printer.
Scan from the front panel only is not supported on the operating system, but only through Capture of Image, preview or Printers Scanners & in the following document:
http://support.HP.com/us-en/document/c03967506
Kind regards
Shlomi
-
Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.
Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.
I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.
I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.
I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.
Interestingly, when I am connected to hpsetup, I can print.
Can someone help me to re - connect this printer? I'll save the reason for reset for another post!
Thank you very much!
FIXED! Sunshyne2005, thanks a lot to direct me to the solution!
Here's what worked:
- Connect to hdsetup
- Press the report Page button on the printer (the one with the box)
- Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
- Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
- Enter the SSID (name) of the wireless network and the password
- Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )
Thanks again, Sunshyne2005!
-
LaserJet CP1518ni on software Mac OS 10.7 for this printer is currently unavailable
"I'm trying to install the HP Color LaserJet CP1518ni on Mac OS X 10.7.5 and get this error: the software for this printer is currently unavailable.
Hi Lorel509,
Welcome to the HP Forums!
I understand that you try to install your CP1518ni LaserJet on Mac OS 10.7, and I'm happy to help with this installation problem!
Please see the installation guide. OS X Lion v10.7: install and use the printer with Lion, because I think it will help.
Hope this information helps you and have a great day!
-
printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project
Hello
You can find out how to access and change the settings of quality below:
http://support.HP.com/us-en/document/c01662356
Kind regards
Shlomi
-
alternative for the printer drivers on Mac OS10.9 system
Until they are available at HP, is there another way to access drivers for office jet 6700 for Mac OS10.9 system? Or at least another way to print, scan and copy... until the drivers come out?
Hello
Yes, if your HP Officejet 6700 worked with OS X 10.7 or 10.8, the drivers and the HP software will continue to work properly with the new OS X Mavericks after an upgrade of the OS.
If you have a new Mac clean® system or OS X Mavericks, HP also provides driver HP Officejet 6700 and ImageCapture to scan files via Apple Software Update right now. It's the same star driver full that would provide hp.com/support. Make sure that the printer is turned on and connected to the Mac when you create the queue for the printer (add a printer).
HP is now working on the full release HP sw/installers of hp.com/support for your model - available in the near future.
-
Acrobat 9 pro, suddenly will not print pdf except for the print image. Begun in the last 45 days after the update from Adobe. Have installed drivers for Canon updated and rebooted, but no change.
If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.
-
I have paid for creative cloud photoshop & lightroom, but can not download because of the incompatibility of the system. I have Mac OS Lion 10.7.5. What are my options?
1 - upgrade your Mac OS to something compatible
Requirements for programs of cloud... scroll down and check each program
-http://helpx.adobe.com/creative-cloud/system-requirements.html
2 - return to https://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-
I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups saying that the # is not valid. Can someone help me. [deleted]
[personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not the Adobe support, please do not post personal information]
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Error "serial number is not valid for this product". Creative Suite
In addition, if you have El Capitan, click on the following link
See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links
-the first link that the answer is a possible solution to install problems
-
I've been using like Asus for the past five years, but my husband just gave me a Mac for my birthday. I have 5 Lightroom installed from the installation disk on my old computer. Is it possible to transfer to my new? In addition, I don't have a CD drive on my Mac.
On your Mac, download Lightroom 5.7.1 of
Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1
Install and enter your serial number. Serial number Lightroom works on Windows and Mac.
-
I have a PC at the moment, but I might go oversees and buy a Mac. Will I have licenses for both?
Hi Dana,
If you have creative cloud membership, you can install the software on two computers. These two computers can be Windows, Mac OS, or everyone.
However if you have a license of type platform, you must check out the link below.
https://helpx.Adobe.com/x-productkb/policy-pricing/Exchange-product-language-OS.html
I hope this helps.
Kind regards
Vivet
-
Hi, I have adobe (downloaded) 12 for windows pc elements 7, but want to transfer on mac (not not keeping the pc). How?, please.
Download the Mac version and use your serial number to acrivate it. As long as your license is mulriplatform it should work.
PES 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Maybe you are looking for
-
Mail - hit me answer button take in new empty e-mail page
Problems with mail on my Macbook pro. When I get an email and click on the reply button which appears is empty an e-mail window as if I click the button new message and fill out all the fields. Even the email to which I answer does not appear in the
-
My dell PC crashed then I followed the news online & tried to reinstall windows XP from my original CD. However, the keyboard & mouse stop working when the installation gets to the 33 minute section which requires me to a box on the screen. I saw tip
-
Monitor may not turn off after setting the screen turns off after a period of inactivity
Original title: control screen does not turn off My cell phone 6 year old runs today to Win XP Pro and IE7 and Firefox. My screen has been set to turn off after 15 minutes, but these days he keeps any. It stays ON all day. Attempted to solve by setti
-
Windows key does not not on the logitech G15 keyboard
I had windows 7 for several months now and have never been able to get the key of windows on my keyboard logitech G15 works. All other buttons seem to function and display the keyboard contains the correct information, but not the windows key. Ideas
-
Original title: Windows 7 Premium Can someone please help me with this problem, I managed to reduce the font size in my [email protected] to the tiny size less than a block of code, it is impossible to interpret, each can bring a solution please.