5.2 ACS using ad to manage the creation of strategies of network device Admin

Similar Questions

• ACS 5.1 using Active Directory to manage the strategy of network device Admin

  Hi guys, we have configured an ACS 5.1 and integrated with active directory Win2K3, we created two AD groups to manage devices network for administrators and one for operators (read-only), so we have configured a device admin strategy and the two groups work very well, but now we are facing a little problem any user that exists in the AD can connect (user exec mode) network devices and we want to cancel the connection with politics, but we do not know how.

  Is there a way to get a user authenticated against acs internal or external group, but at the user level, everything as you can make it to GBA 4.X?

  Thanks for your help!

  Best regards

  Oscar

  Yes, you can change that, it's a profile of shell by default. You must create a new one with privilege level "not in use" and select the new profile of the shell (no Directors or Operartors) under Default Device Admin > authorization profile > edit and make changes.

  I hope this helps.

• How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.

  Hi all

  I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc.  Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access.  Can someone share me how to initiate this, creating policies.

  FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.

  Kind regards

  Marlon

  Marlon,

  I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2.  This configuration may not work because yours is Junos, but it could bring closer you reach to understand.  Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)

  Good luck!

  -Chris

  Title: Example configuration - GSU of Juniper and Cisco ACS v5.x

  Product: SSG320M juniper (Cisco ACS v5.x)
  

  Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)

  Network topology:

  [Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
  

  Description:

  Goal - authenticate GSU administrators using GANYMEDE + instead of local connections

  Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.

  ACS v5.x is a VM based on Linux with a completely new user interface and structure.

  Configuration:

  Configure the Juniper (CLI)

  1. Add configuration Cisco ACS and GANYMEDE +.

  Set id CiscoACSv5 of auth-server 1
  set the auth-CiscoACSv5 server ServerName 192.168.1.100
  set server CiscoACSv5-type of admin account
  set the server CiscoACSv5 auth type Ganymede
  Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
  define CiscoACSv5 Ganymede 49 auth-server port
  Set the server auth admin CiscoACSv5
  Set admin auth distance primary
  Remote admin auth root set
  define outer-get administrator privileges

  Configure the Cisco ACS (GUI) v5.x
  1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
  Create the profile of Shell of Juniper.
  Click the button [create] at the bottom of the page
  Select the general tab
  Name: Juniper
  Description: Custom for Juniper SSG320M attributes
  Select the custom attributes

  Add the vsys attribute:
  Attribute: vsys
  Requirement: required
  Value: root
  Click on the [Add ^] button above the field for the attribute

  Add the attribute of privilege :

  Attribute: privilege
  Requirement: required
  Value: root

  Note : you can also use "read-write", but then the local admin does not work correctly
  Click on the [Add ^] button above the field for the attribute
  Click the button [send] at the bottom of the page

  2. navigate to access policies > Access Services > default device Admin > authorization
  Create the authorization policy of Juniper and filter by IP address.
  Click [customize] at the bottom right of the page
  In terms of customize, select IP address in the left window
  Click the [>] button to add
  Click the [OK] button to close the window

  Click the button [create] at the bottom of the page to create a new rule
  In general, the name of the new rule Juniper and make sure that this option is enabled
  In Conditions, check the box next to IP address
  Enter the ip address of the Juniper (192.168.1.100)
  Under results, click the [Select] button next to the Shell profile field
  Select "Juniper" and click the [OK] button
  Under results, click the [Select] button under the command field sets (if used)
  Select "allow all the" and make sure all other boxes are not CHECKED
  Click the [OK] button to close the window
  Click the [OK] button at the bottom of the page to close the window
  Check the box next to the policy of Juniper , and then move the policy to the top of the list
  Click on the [Save] button at the bottom of the page

  Audit:

  Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.

• Q: Connection Manager connections of raspberry on different network devices

  Hello

  I have a raspberry pi in my office and a Windows virtual machine image running in my lab and they are on different networks (RPi in Austin) and Windows WM Coloroado and when I try to connect to the raspberry of Pi using the devices connection manager I can't get a connection. The State tells me 'Sign in' and the usertest.sh script is run on the RPi with no message in the window where I started usertest.sh.

  I can access the RPI using Putty to my Windows 7 client, then there is a network connectivity.

  I use Java ME 8 Early Access 2 and my Windows VM running Windows 7.

  What I'm missing here, it should work?

  Thank you

  Andy

  Hi Andy,.

  It's the network settings of your windows in the control panel. If for some reason you have set socks proxy the affects the connection of the otbound in the Device Manager the device

  Andrey

• In Windows Defender, remove them, disable and enable buttons will activate not when I try to use them to manage the start up programs.

  I'm looking to speed up startup of Windows Vista.  I had used Windows Defender to disable startup programs.  It worked as described.  This time, delete, disable it and enable buttons would not activate or turn on when I chose a program to turn off.  Any suggestions?

  Defender is probably not necessary with McAfee...

  Both offer a real - time sweep and may potentially conflict with each other.

  You should never have more than one security product installed on the PC, providing active protection / scan. This can cause performance problems, system instability and conflicts between programs and can affect all installed antivirus product efficiency.

  Vista is historically a slow start... I have improved the startup of my Vista laptop with a reinstallation of the operating system, without installation of I-tunes (the computer was used by my daughter-in-law) and I added 1 GB of RAM.  It starts very well now.

  McAfee is known to adversely affect the performance of the computer - I him have not used for many years.  The last time that I removed McAfee from a slow computer, that it was like the addition of several gigabytes of RAM to view was an immediate performance improvement.  If your computer has a good processor (preferably bicoeur) and several GB of RAM must be able to run Vista (and McAfee) however.

  Good luck...

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

• Is it possible to use EAS to manage the planning of the Dimensions and the members?

  Our Organization is still under implementation of the planning and implementation partner said that you can not use EAS change members because it would cause problems and I want someone to verify this, because I have little hard to believe.  I mean, using workspace is so awkward to edit members while eas is much easier and really tempting for me to try, I don't want to screw up anything.

  Any input is greatly appreciated,

  Bret

  Yes. It is not best to use EAS to change members / any changes to metadata

  Planning is as a web based tool for planning/preparation of the budget having Essbase as a backend database and all the metadata is stored in a repository of the relationship (of planning) and are pushed into Essbase (where your data is stored).

  If you use Web Forms / has all the planning, and if you make changes to members directly in environmental assessments, it is reflected in planning and it is always advisable to not make changes directly from EAS.

  If it's just one / two Member changes then I would directly in the planning of the workspace. If there is a set of members then I prepare a file and then run it using contour load utility

  HTH

  Amarnath

  ORACLE | Essbase

• Question on the creation of a wireless network with small size

  I'm trying to configure a wireless network between my A100-147, a BT Voyager 2110 wireless router/Modem and my desktop computer with a printer so that I can print from the laptop. The laptop can access the Internet OK and I can set up the network on the desktop by checking the use Windows to configure my wireless network settings option in the wireless network connection properties dialog box. I can not this box at the top on the A100. What should I do?

  As a side note, I also tried FN + F8 to toggle the Wi - Fi adapter, but nothing seems to happen, no indicator appears on the display. Is this correct?

  Hello

  I put t know if I understood you right, but you said that the laptop accessing the internet via WLan, but you cannot select the option use Windows to configure my network wireless on the laptop.

  So, how to connect to the WLan with the laptop? Have you used a utility 3rd to configure the WiFi network?

  As far as I know if you want to connect to the computer at the other PC via WLan so the computer-to-computer (ad hoc) option must be enabled!

• Software exists for the creation of a 'virtual' network card and going to all the traffic on the local network through a proxy server, then by this adapter?

  I can access net through LAN and my college requires a proxy for all access to the internet. If you want to use the internet, it is impossible to do not use a proxy. This is a problem for many programs that do not seem to allow you to enter the proxy settings.

  any software is to create a 'virtual' network adapter that will pass all traffic network (or any protocol x traffic) through the proxy?

  So I have do not need to enter the proxy anywhere... and I have normal internet access.
  What I saw is possible with OpenVPN, but it is a vpn service that I need .i just want to use the feature. In OpenVPN I just enter my proxy server in its framework and OpenVPN to connect to a VPN service and routes all traffic to the FAUCET adapter after which I don't need to set the proxy address anywhere... so my idea is how can I use only the last part that is routing all my LAN traffic to a virtual card.

  Support the LAN---> proxy---> virtual adapter--->, then software I access the net

  That's what I like to do...

  Although I am facing this problem on Windows 7, solutions for all operating systems are welcome.

  P.S: Proxifier is not my solution to not offer something like this.

  Hi Sapan,
  Thanks for posting in the Microsoft community!
  You can use your favorite search engine and look for the software that meets your requirements.

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Update driver for the location of the controller bus PCI 5 network, device 0, function 0 code 28

  location PCI bus 5, device 0, function 0 code 28

  Hello Mark135,

  Thank you for your message.  Go to the Web site of the manufacturer of your computer and download/install the latest network driver for your computer operating system.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Manually manage the?

  Can someone explain this "manually manage music and videos" checkbox how? It's under 'Options '.

  Rather than use the synchronize option to manage the music from iTunes to iOS device, you can click and drag the pieces of music and video. In the beginning, it is a little heavy, but if you want only a small amount of music on a device, it may be advantageous. However, changing the sync to manage manually will make it the entire library to remove from the iOS device, and even if you change to manually manage to synchronize.

• What are the tasks we can perform by using Component Services in the Microsoft Management Console?

  Original title: use MMC

  Can someone enlighten me on component services, found in the administrative tools, including the management console folder. Is their anything that can be done by someone who has no knowledge on this subject, extensive Windows, I use XP (SP3) thank you.

  Hi ratchet.

  Microsoft Management Console (MMC) lets system administrators create much more flexible user interfaces and customize administration tools.

  See this link for the tasks that we can perform using Component Services in the Microsoft Management console.

  With Component Services, administrators can deploy and administer service applications of components through a graphical user interface or automate administrative tasks using a programming or scripting language. Software developers can use Component Services to visually configure routine component and behavior of the application, such as security and participation in transactions, and to integrate components into Component Services applications.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

  Also check out this link:

  Using the Microsoft Management Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

• I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  I deleted the account current user which I use through, Mycomputer manage option, know that I am in this user only, please help me restore this user...

  Hello

  Who is the user account you have currently connected?

  Research of user in the sub folder location:

  Folder C:\Documents and settings\Users

  If you find in the folder the administrator account user, then you may need to create a new user account and transfer of records and documents to the new location

  See the link for the procedure below: how to copy data from a corrupted to a new profile in Windows XP user profile:http://support.microsoft.com/kb/811151

• Windows Movie Maker "the file is protected using digital rights management and cannot be imported."

  I downloaded a large .wmv file last night and have to divide into 8 smaller parts, but when I try to "import media" in Movie Maker is stipulates that "the file is protected using digital rights management and cannot be imported.

  Is it possible to import the file to edit?

  Turnbite removes the DRM http://download.cnet.com/Tunebite/3000-2140_4-10783040.html but I still don't know if it would work with Movie Maker (only because I haven't used products - looks like it would work, but I'm not sure).  Here is a review of version 6 (the current version is 7): http://mp3.about.com/od/audiotools/fr/Tunebite_6_Rev.htm.  Apparently, he's copying your DRM files and so it is required to have at least some degradation (but not a lot from what I've read - not noticeable).  Because it's free, it can't hurt to try it and see if it solves the problem.

  AVS looks like he got a number of good products http://www.avsmedia.com/, but I don't think that one of them address the DRM issue.  I really didn't listen to music or watch videos on my PC very often so I'm not familiar with the products to do such things.  May I suggest you post your question in the music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads , where issues of music specialists will be more than happy to help you with your questions.   Or in the photos and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the video specialists will be happy to help with you project of filmmaking.

  As for Shane Childs, I suspect that Karthik copied an answer, he used for this person to respond to your question and everything just forgot to change the username - just a typing error.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic.

  I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic. I downloaded the MIB from the Dell support site and I saw thar there are about 105 MIB in the downloaded file. My question is: in what Mib, I can find the OID which allow me to monitor the above?

  Thanks in advance

  Rogerio

  Unfortunately, there is not a complete list of the different OID in different MIB. In order to find this info to simply browse through the different MIB seeking the OID, you need. We did some looking through the MIB and found these OIDs that can help you. Another thing to keep in mind is that the MIB downloaded are in general of a group of switches. So there are situations where a /OID MIB listed will work for a certain model of switch with certain level of firmware.

  RMON-MIB

  

  FastPath-cos-qos-mib

  

  Another method, some people have had success, done using a SNMP walk.

  http://www.snmpsoft.com/freetools/snmpwalk.html

  I hope this information helps. The method of importation for these MIBs can change based on the management/tracking software that you use.

  Thank you

• How to use FTP Client and manage the table in BB with JDE

  I'm a newbie to BB development. I have an application in mind, it is a simple ordering application. BB users can send order information to an ftp server. The BB will have some paintings as a customer table and the Order Details table (the two have only a few records). Since cannot use the Services of SDM BlackBerry because the license fees. I'll use JDE to develop the application.  Here are my questions:

  1. What is the best way to manage the tables (read/write)?  RMS, or embedded database (which one?)
  2. is there any ftp client in JDE, api can be used to send data to an ftp server?

  Thanks for help.
  PJ

  The exact figures for RMS sizes are available in this article:

  What is - size restrictions when you use the RecordStore
  Article number: DB-00656
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800724/What_Is...

  So that your information is correct, in 4.6 or later, the per application limit went up to 512 KB.  I don't know if there is a limit on a single record in a record store. We must be careful of the terminology here, it's RecordStore or RMS - is not in BlackBerry terms anyway, PersistentStore (see next).

  The BlackBerry offers two other ways to store data.

  The first and most commonly used are called PersistentStore, and it is an a storage mechanism for objects, I am not aware of any restrictions, other than the memory of the device, about the size of an object that can be stored in PersistentStore.  The advantage with PersistentStore, is that you just persist an object helps you, rather than having to convert it to bytes (serialize) before storing and converting new (him deserialize) after reading it back.

  The second way is to write data using the FileConnection API, and you can for example use this to write data to the SD card in the device.

  EFF and PersistentStore use the flash memory in the device.  You don't have to manage yourself.  You treat all that identical objects, the BlackBerry operating system very cleverly manages to bring your items in RAM and save them in Flash, so you don't have to worry about the type of storage you have.

  I hope this helps.