Q: Connection Manager connections of raspberry on different network devices

Similar Questions

• Connect comments on a different network than the host

  Hello

  I just started to use VMWare instead of Virtual PC, and I'm stuck trying to do something that I used to have the installer.

  I want to be able to connect to a virtual computer to a wireless network and independent of the host connection. In this case, the host will not be connected to a WLAN network, but the virtual machine will be.

  Is this possible?

  Thanks for any help.

  Not regarding virtualization, I suspect unless you remove the .inf and .pnf files in the folder %systemrot%\inf of the guest for the VMware NICs and and add IDs PCI of its .inf file for the .inf for your wireless card that you have copied to here and also change the drivers referenced in the .inf for your wireless card file to be the VMware ones. Not tried this, just a theory and not a beautiful there :|

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Unable to connect to other Windows 7 network devices - 0 x 80070035 and 0X80004005 error codes

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• 5.2 ACS using ad to manage the creation of strategies of network device Admin

  Hi all

  Need to light here, we were able to integrate our newly installed ACS 5.2 in our regional area.  now I create an Admin Access political device for the regional network administrator group and regional network operators. each with full and reading access respectively.

  I already have the default identity policy and authorization with order policy defines fullaccess and showonly for each group, now I don't know how can I match the AD Group regionaladm and regionalops so that each user is part of one of these groups will have a proper read/write access.

  Kind regards

  Marlon

  You need start adding rules to the authorization policy

  Reach

  Access policies > access > default device Admin > authorization

  Press 'Customize' and make groups of AD1: External a condition select and press OK

  You can now make rules based on the content of the AD groups

  Tap on create and check the option AD1 groups: External and now can now enter the groups that you want to check for access

  Note all of the groups can be selected is defined in

  Users and identity stores > external identity stores > Active Directory

  Only the groups selected here are available in politics

• Connect to different networks (with or without proxy)

  Hi all.

  I'm working on a project where I need to be connected at least two different networks. One of them is used to communicate with the wireless IP cameras (using ActiveX Axis Media Control), and the other is necessary to access the internet and load the Google maps (using an ActiveX from Microsoft Web Browser control). I'm at University and the internet connection is through a proxy server.

  I don't know much about networks and HTTP requests, but I notice that if I set up Internet Explorer to work through the proxy, I am able to navigate in GoogleMaps, but there is no way to access the IP cameras. And if I set Internet Explorer to work without a proxy, I get exactly the opposite.

  Could you help me?

  Thanks in advance.

  Kind regards
  Francisco

  Hi Porras,

  Try to create an exception for your proxy server - see attached pictures (Win XP SP3).

  Note: These proxy exceptions can be created programmatically, by editing the Windows registry.

  See you soon.

• Vista will not connect to a pc to network shared automatically at boot

  I tried many things for centuries and then abandoned (years)... now I try again.

  I have a 32 bit Vista pc and I always need to enter a user name and password to connect to another device on my network - I want it to connect automatically whenever the pc starts. I have a Windows 7 laptop and it connects to all devices in the network at startup (after I initially defined and registered the name of user and password). I want to give my kids my vista pc (they want a mac/ipad - I want they have a pc :-)) but I don't always have it connect automatically at all or network devices without the need for user names and passwords.

  Help / tell me this problem is now resolved?

  Thank you

  Hello, JHM.

  Try to turn off password protected sharing and check.

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2. click on the chevron to expand your current network profile.

  3. under password protected sharing, select the following:

  A. turn off password protected sharing

  4. click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also try the suggestions from the link below for a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/Wireless-credentials-requested-by-Vista/21e33cb7-BCC4-4c04-B41F-18bf92a9fd06

  Post back with the State.

• We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, its error message that gives as no network device connected. Suggest me!

  Original title: problem in installing FSRM

  We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.  Suggest me!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• Connect the 2 locations using RV016 router to fill 2 different networks.

  I have a RV016 connected to a comcast cable modem to slot 1 with IP 192.168.6.1

  I have a RV016 connected to a comcast cable modem at the 2 with 192.168.10.1 IP location

  I installed a VPN tunnel from gateway to gateway between 2 routers RV016.

  I have a LAN in slot 1 with the IP 192.168.1.1, which connects to the internet through an Adtran router with 4 lines of T1 servile.

  I have a LAN with IP 192.168.5.1 2 location that connects to the internet through an Adtran router with 3 T1 lines servile.

  I like a computer to location 2 to connect to the RV016 in the local Comcast modem to the Comcast modem at location 1 in the RV016 to slot 1 then go out to the local network at location 1 and communicate with an application server on LAN 1.

  Help, please.

  You can't do that with a RV016. The RV016 only supports layer 3 tunnel. This means that the two ends are different networks with different subnets. The traffic between them is not filled.

  If you want to really two bridged networks, i.e. join in a single LAN with a single IP subnet and a single broadcast domain you need a layer 2 tunnel, for example a tunnel L2TPv3. That works on layer 2, which is on the MAC addresses inside your networks. In this way, you can use the same IP subnet at both ends and on each side, it seems that the other side is connected to the same ethernet network.

  The RV016 does not support the tunneling of layer 2. You can create an IPSec tunnel, which is layer 3. If there is really a need for a tunnel layer 2, you get different devices. I recommend that you evaluate if a layer 2 connection is really necessary or not.

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• is it possible to connect 2 computers 2 different 1 modem wireless routers

  is it possible to connect 2 computers 2 different 1 modem wireless routers?

  Why do you have 2 routers?

  Depends on the design of the modem. It probably only supports a connection. So, you'll probably end up making a wired connection between modem and "1 router" and if you really need a second wireless router, install a wired connection between the 2 routers.

• Cannot create the remote desktop connection in two different networks.

  Original title: Windows 7 PRO through internet Remote Desktop connection.

  Two windows 7 Machines Pro. They want to be able to connect to the main computer (Internet router) when they are away at their House on the other.

  It connects via DSL behind a router

  A modem connection cable Roadrunner

  The customer has upgraded to pro. Computers aren't workgroup and domain just PC. What would be the best way to have to allow them to connect to the router. I tried the port on the router, nothing helps.

  Hello

  Remote Desktop connection uses port 3389 in order to listen to the incoming connection.

  When done over the Internet, you will need to forward the port to the IP of the computer.

  Alas, a router can send a specific port only to a single computer.

  Since you have two computers, you must change the listening port for one of them to a different port number and transfer the new port to the IP Address of the computer.

  Let a computer uses the default port 3389.

  In the second computer, change the port to another port of your choice, http://support.microsoft.com/kb/306759/en-us

  Assign static IP to the computers (make sure that it is in the DHCP range).

  In the router open port 3389 to the IP address of the computer with the default setting.

  Open port you used for the second computer to its IP address.

  When you connect, if the connection is a connection by default, he would go to a single computer. When the connection is made with on the second track, he would go to the second computer.

  This page describes another remote program but it represents the principle more in detail,http://www.ezlan.net/vnc.html (towards the end of the page).

  Method to deal with the external IP address here, http://www.ezlan.net/myip.html

  Windows 7 RTD, http://windows.microsoft.com/en-US/windows7/allow-remote-desktop-connections-from-outside-your-home-network

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to debug the Wi - Fi connection in Raspberry Pi

  If SSH cannot connect with Raspberry Pi after configuring the WLAN0 configuration file "interface", how can debug what the problem of Wi - Fi?

  By the way, is the tutorial Wi - Fi configuration script supports WPA2 Protocol?

  Thank you

  Matthew Ho

  Hi Matthew,

  Log on to your PII via the USB/serial cable and try to issue the following command:

  sudo /etc/init.d/networking restart

  If something is wrong with your config, there will be an error message.

• Hi, I'm trying buy Adobe Creative cloud but get message "this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help."

  Hi, I'm trying buy Adobe Creative cloud but to message "" this card was purchased in a country that does not match your Adobe ID you can try to connect with a login different Adobe or contact us if you need help. ' "

  Can anyone help with this please. Thank you

  Hello

  Please visit the link below: -.

  Redemption code help

  How activate/redeem redemption Adobe CC Code

• This card was purchased in a country that does not match your identification code Adobe you can try to connect with a identifying different Adobe or contact us if you need assistance.

  Hi I get this message when I try to install adobe software, how can I fix this problem? Thank you I really need your help

  This card was purchased in a country that does not match your identification code Adobe you can try to connect with a identifying different Adobe or contact us if you need assistance.

  Hello

  Please see redemption code help

  Kind regards

  Sheena