5.5 and Windows Client vSphere vSphere

Similar Questions

• Error: unexpected character "(code 65279 / 0xfeff) in prolog. EXPECTED ' < ' to [line, col {source unknown}]: pop [1.1] error in c# windows client vSphere?

  Hi all

  I use Windows c# client below the version:

  

  Somehow, I had random error / intermittent pop up:

  Error: unexpected character "(code 65279 / 0xfeff) in prolog. EXPECTED ' < ' to [line, col {source unknown}]: [1.1]

  So I wonder if it is a recent issue with the Windows 10 .NET framework update?

  My other client c# version even on Windows Server 2008 R2 is not having the problem.

  FYI,.

  No need to upgrade to vSphere 6.0 yet. I updated the client vSphere upgrade VCenter server in 5.5U3d the project last week, so far, that's the problem:

  

  See the screenshot above for the stable version.

• Client computers freeze momentarily but regularly - 14.10 Ubuntu x 64 host, Linux and Windows clients

  Hello.  I use Workstation for many, many years, so I would say I have my set reasonable expectations.

  My main desktop computer:

  -Processor Intel i7 (4950 I think), memory of 16G, Samsung 850 SSD Pro, operating system Ubuntu x 64 VMWare Workstation 11.1 14.10

  It works really well, but my client machines, be it Windows 7 business or Ubuntu LTS 14.04 frequently "stutter" in use.  When the stuttering happens, the host machine is relatively high projection of CPU on vmware-vmx, 15 or 20 according to 'top '.  Stuttering can happen every minute or two, perhaps 5 to 10 seconds at a time.  It's boring, but when I use the CAD software in the computer of the customer it is downright dangerous as shortcut keys get failed, partially or entirely, and usually bad things come.

  I can watch or try to stop this stuttering?

  Thank you!

  I'll call this resolved - finally.  I thought I was going to have to continue to use Virtual Box forever - a sad perspective.  This problem has persisted in 12 Pro Version as well.

  I can't believe I'm the only one having this problem - especially when its the password on both machines - 2 for 2.  In fact I found someone else having this problem:

  VMware workstation 11 on Ubuntu 15.04 high utilization of the processor resolved

  VMware workstation on Ubuntu with windows guests 11 freezes from time to time with very high CPU usage. The vmware-vmx and khugepaged process get time cpu 100% for a few seconds. The khugepaged is the process that configures the transparent hugepages. When I turn off the transparent windows hugepages prompt without freezes again. To turn off on each operating system starts I put in /etc/rc.local

  ##################

  If f/sys/kernel/mm/transparent_hugepage/enabled test; then

  never echo >/sys/kernel/mm/transparent_hugepage/enabled

  FI

  If test-f/sys/kernel/mm/transparent_hugepage/defrag; then

  never echo >/sys/kernel/mm/transparent_hugepage/defrag

  FI

  ##################

  Solved

• Oracle on Linux and Windows Client question database server: NetMgr Windows and Linux NetMgr

  People,

  Hello. I have installed Oracle Database 11 g 2 server in the Oracle Linux 5 Starter PT853 Instance of database virtual machine. Then I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine. Now I face the problem of connection of the VMs 2 as below:

  
  In Manager Net Linux Server Machine:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: localhost
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: localhost
  Port: 1521

  
  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.
  In the Windows XP Client computer, the information in the Net Manager is the same, but the connection is not successful. Its details are as below:

  
  NET Service Name: PT853
  Protocol: TCP/IP
  The database Machine host name: localhost
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  
  I have test the Service using "SYSADM" UserID and password to 'SYSADM' which are the same with Linux, but this error: TNS: listener does not currently of service requested in connect descriptor.

  
  I followed this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 virtual machines in Windows 7 host machine.

  In Windows XP Oracle database Client Installer directory, the "tnsnames.ora" file has an entry that matches the name Service in Net Manager. Directory of database server installation Oracle Linux, the file 'tnsnames.ora' has no entry because I installed the server of Oracle database with the instance of database startup PT853.

  
  I tried to test 2 virtual machines in the way as below:

  In Linux, [user@localhost ~] $ping WindowsXP_HostName
  Release: Unknown host WindowsXP_HostName

  
  At the Windows XP command prompt:
  C:\ping localhost.localdomain
  Its release: ping localhost 127.0.0.1 with 32 bytes of data...
  Reply from 127.0.0.1: bytes = 32 time = 2ms TTL = 128

  
  He meets a few times and then disconnected by itself. It seems that Windows XP is ping itself and not Linux server. The host name of the Linux server is 'localhost' as well. It is a kind of confusion for me.

  
  From the information above, we can see that 2 VMs cannot connect between them. Net Manager in Windows XP Oracle Client unable to connect its Service PT853 with the Oracle Linux database server.

  My question is:

  Can any folk tell me how to connect Oracle Client in Windows XP with the Oracle Linux database server?

  
  Very grateful in advance.

  user8860348 wrote:

  People,

  Hello. Thanks much for the reply. I am very grateful for your help.

  In Manager Net Linux Server Machine:

  Service name: PT853
  Connection type: default database
  "TCP/IP Protocol".
  Host name: 192.168.196.102
  Port name: 1521

  Listener: LISTENER
  Protocol: TCP/IP
  Host: 192.168.196.102
  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853
  Protocol: TCP/IP
  The host of the database Machine name: 192.168.196.102
  Port number: 1521
  Name of the Basic Service: PT853
  Connection type: default database

  I test the Service using the "SYSADM" username and password "SYSADM" which are the same with Linux and the connection is successful as well.

  IP 192.168.196.102 is Linux. This means that oracle database Client in Windows XP may log into Oracle Database Server under Linux. Don't you think I'm not mistaken? If so, I'm very happy and very grateful to you.

  "Do you think I'm not mistaken?

  By definition, if you can establish a connection, then you are correct.

• Where the client vSphere for Windows 8? You will need to download it / can not find or opt out.

  Ladies and gentlemen, I have the book Fast Track of VMware vSphere. Flight 1. On page 40, it clearly states "the vSphere client can be installed quickly and easily in the VMware vCenter Setup Wizard. The vSphere client runs on a specific list of windows operating systems. The same page is an image showing the button «Download vSphere» customer What page IS NOT DOING is telling where I'm going to download it. I went to VMware and tried to locate the client vSphere for Windows 8 (as we suppose to download the correct version of the client, and I have windows 8, though, there is no "vSphere client for Windows 8," unless I'm blind.) Can someone please tell where is the client vSphere for Windows 8? If there is no such thing as the client vSpehere for windows 8, including vSphere client needs to be downloaded? Looking for vsphere client 5.1, I came up with this: this is a update 2, what the plain vSphere 5.1 for windows 8? Modules and VMware vSphere VMware vCenter Server 5.1 update 2 it is a update 2, what about the plain vSphere 5.1 for windows 8? VMware vCenter Server 5.1 update 2014-01-2 16 is for customer web (I don't want the web client) VMware View pilot & VMware vSphere 5.1 Internet Client SDK tools this is for customer web (I don't want the web client) is Internet Client SDK 2012-11-19 the VMware vSphere 5.1 for a 1 has updated that you say the plain vSphere 5.1 for windows 8 VMware vSphere with modules and operations management VMware vCenter Server 5.1 update 1 has is for a 1 to update, how about plain 5.1 for windows 8 VMware vCenter Server 5.1 vSphere update 1 to 2013-05-22 okay maybe she is, but she's not saying windows 8 VMware View VMware vCenter Server 5.1.0a and modules , it is get 5.1.0a Server (I need to the plain vSphere 5.1 for windows 8) VMware vCenter Server 5.1.0a 2012-11-19: this is an another update 1 b and for the cloud, how about plain vSphere 5.1 for windows 8 VMware vCloud Suite VMware vCenter Server 5.1 updated 1 b and modules, it is an another update 1 b How about plain vSphere 5.1 for windows 8? VMware vCenter Server 5.1 updated 1 b 2013-08-01, which is the suite of Cloud (I need the plain vSphere 5.1 for windows 8) VMware vCloud Suite VMware vCenter Server 5.1 update modules and 1 c it is an update 1.c. Before you download this, I need the plain vSphere 5.1 for windows 8 VMware vCenter Server 5.1 Update 1 c 2013-10-17, it is for modules etc. etc. etc. VMware vCenter Server 5.1.0b 2012-12-20 Horizon DaaS VMware vCenter Server 5.1.0b VMware modules VMware vCenter Server 5.1.0b 2012-12-20 VMware Horizon DaaS VMware vCenter Server 5.1.0b and modules of VMware vCenter Server and cloud suite VMware vCloud Suite VMware vCenter Server 5.1.0b 5.1.0b 2012-12-20 VMware View VMware ESXi Installable VMware ESXi Installable 25 5.1 5.1 - 10 - 2012 while downloading the plain vSphere 5.1 for windows 8? Thank you.

  Hi friend

  Here are the simple steps:

  1. in fact, it comes with beam VC itself. When you install VC, on the first page itself you will find.

  2. Another way is: open your browser: type this address: "https://", you will get a page where the download link is available for the VI client. Download and install.

  Note: I haven't read your full post, but I guess, you're looking for it. You have another customer Web option IE too delivered with beam of VC.

• EMC XtremIO Gen2 table, vSphere 5.5 and Windows Server 2012 R2 EFI

  We spin the new array of XtremIO Gen2 a POC of EMC and discovered a problem with customers running Windows Server R2 2012 or the EFI firmware. The details are in the blog below, but the goal here is to ask for the community of entry of anyone else running on XtremIO with firmware Win2k12 R2 and non - R2 and EFI/BIOS. EMC support is also working on this subject, so I can finish to post my reply here. Nevertheless, community information XtremIO is so limited (because of his November GA), I hope that this will make a difference.

  Blog/details: XtremIO Gen2 EMC and VMware: bcTechNet

  Environment:

  Dell PowerEdge R810/R820 hosts

  QLogic CNAs 8262 (5, 5-compatible firmware/drivers)

  Switches-Cisco Nexus 5548UP

  FCoE to guests; CF storage

  3Par T400 source of storage (FC 4 GB/s)

  Target storage XtremIO Gen2 (8 Gbps FC)

  VMware vSphere, ESXi 5.5 Build 1331820

  The Windows Server 2008 R2 (BIOS), 2012 (BIOS) clients and 2012 R2 (EFI)

  Storage 3PAR - no problem with all the guests

  XtremIO storage - can not (re) start guests R2 EFI 2012

  After a few weeks of troubleshooting by engineers from VMware and EMC/XtremIO, the question was determined to be a problem starting EFI replace a block of 7 MB in the XtremIO table, which filled the queue, and who would never clear that he expected more data to complete the communication (i.e. deadlock). This seems to happen only with firmware of EFI VMs (tested with 2012 Windows and Windows 2012 R2) and the question is on the end of XtremIO.

  The good news is that the problem can be mitigated by adjusting the Disk.DiskMaxIOSize parameter on each ESXi host by default 32 MB 32768-4 MB (4096). You can find it in vCenter > Home > Configuration > advanced settings (from the bottom) > drive > Disk.DiskMaxIOSize. The XtremIO team is working on a permanent fix in the meantime, and the workaround can be implemented hot with no impact on ongoing operations (potentially minor host CPU load increase as ESXi breaks > 4 MB e/s in MB 4 pieces).

  The rest of the ventilation on the latency, small block IO, etc. can be read here: XtremIO EMC and VMware EFI | bcTechNet

  Thank you, Darius, and EMC/XtremIO team.

  -Chris

• client vSphere and vCenter server

  The vsphere compatibility page 14 OS compatibility tables.  I see that Windows 2000 server sp4 has no compatibility with client vSphere and vCenter server.  This means that if you have 2000 servers in your current VMware environment you must upgrade the operating system or?

  Hello and welcome to the forums.

  Information on p.14 means that Windows 2000 SP4 is not compatible with (in other words, you can not install) the Client vSphere, vCenter Server and VMware vCenter Update Manager.

  Specific versions of Windows 2000 Server can be verified to support in the Compatibility Guides.  As long as you plan to run the Client vSphere, vCenter Server or VMware vCenter Update Manager on Windows 2000 virtual machines, you'll probably be fine.  It depends on which version of Windows 2000, you have, but just check the compatibility guide to be sure.

  Good luck!

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• View of the horizon 6.2, 3.5 see Client and Windows 10

  Hi all

  I did an in place upgrade of Horizon view 6.2 over the weekend and have been very satisfied the performance and features.  However, I have a bit of a problem with Windows 10 company.  The VDI desktop resize not balance not as expected.  It seems that whatever the Windows 10 Office is set in vSphere, seems to stay when connecting with the customer to view.

  I had this problem for Horizon 6.1.1 with the 3.4 customer, but not a not sweat until this recent publication.

  I wanted to remove my image of Windows 10 company as being the culprit, so I installed a new version of Windows 10 Enterprise 64-bit with the latest tools from VMware View Agent and the problem persists.

  I'm under 6.0.0.b and ESXi 6 vCenter with the latest patches.  I can validate the scale/resize screen problem occurs on multiple endpoints, so I don't think the problem is with the endpoint device and the client.

  Any ideas?

  It's 3D acceleration.  Turned off, power off/on VM and everything works as expected.  (SVGA/NVIDIA) 3D acceleration is not supported in Windows 10?

• Unable to connect to web client vsphere... y at - it something for her?

  Good guys, maybe I'm missing something very obvious here but I couldn't find an answer.

  I test esxi 5.5, downloaded the latest version and installed in a test machine. Installation went well, I am able to access the page by default on this machine with instructions and guidelines mention that I should really use the web interface instead of the vsphere client. All right! But how? There is no link with it on this page by default. I found the interface should in theory be available to port 9443 or 943, tried both and although I can connect to them using unencrypted http for some single line of text saying SSL must be used, queries https get never be answered. In other words, https://ip_addr:9443 is not responding.

  So, what is the appropriate procedure to activate? I'm on a Mac and it is difficult for me to find a Windows installation for time to at least test the regular customer. I tried using Fusion Pro 7.0 via the 'connect to server' option in the menu - does not work.

  I'm puzzled. I really feel like I'm deciphering some ancient Egyptian hieroglyphics here. Shouldn't be that bad, right? Looking for your advice.

  >... how exactly the Windows client will activate the web client

  This isn't. The Windows Client and Web Client are two different things. The Web Client is only available with vCenter Server (on which the web server is running). The Windows Client as long as the Web Client Access ESXi hosts via the API.

  André

• Customer error supported download the files for the client vSphere 5.0

  Hi all

  
  

  I am new to VMware and learning ESXi 5.0. I built my 5.0 ESXi host and then downloaded the 5.5 vSphere client. Given that I have only one host; client vSphere 5.5 can handle that. I installed the client and enter the IP address of the host with root/configured password management. He gave the certificate WARNING said to download the files from customer support. He has always exceeded with error as you can see it.

  
  

  I'm under client on a LAN connection high speed, I even changed the connections to see if access to the internet the problem. It is more simple home, 1 host installation, a windows 7 computer (with vSphere client installed), both connected to my DSL modem/router. The client support files won't download anything. Help please!

  
  

  

  Sorry my bad vSphere Client 5.5 support ESXi 5.0 but Client vSphere 5.0 ESXi host does not support the 5.5U1 (Build 1618071)

  Check the compatibility matrix for more information vSphere Client

  

  VMware product interoperability matrices

• Is there a client vSphere for linux?

  I've recently upgraded to vSphere v4 for Windows Client but hoped that a native client Linux may now be available?

  I had no luck with the Infrastructure running in Crossover Linux client.

  Thank you

  Unfortunately there is not and there is no way to run under linux using Wine etc.

  If you're really impatient to have running, you can use KVM to run a virtual Windows machine and Windows applications fit into your Linux desktop environment.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• ESXi 5.5 - download Web Client vSphere

  I just installed VMware ESXi Free Edition 5.5 on a Dell server, when I open VMware vSphere Client it says the following:

  "In vSphere 5.5, the latest vsphere are available only via the Web Client vSphere. The traditional vSphere client will continue to operate, supporting the same function defined as vSphere 5.0, but not to expose the new features in vSphere 5.5.

  The vSphere Client is always used for the vSphere Update Manager (VLM) and the host Client, as well as some solutions (for example. Site Recovery Manager). »

  Where can I download vSphere Web Client?

  Thank you

  weblclient is available as an ISO part vCenter. Only if you manage the ESXi host through vCenter you can use webclient. If you use free ESXi vSphere Client is the only way to manage the ESXi host