View of the horizon 6.2, 3.5 see Client and Windows 10

Similar Questions

• View of the horizon 6 - customer zero can't see RDS Deskstop

  Hello!

  We have been in view for several years.  I just deployed a Desktop of RDS.  If I connect to the server from view with the client software from view of the Horizon, I see the desktop as an option, as well as other items of work to which I have the right.  However, when I connect to the server with a Client light Wyse zero (P20s and P25s), I can see other automated and manual office pools, but the RDS Desktop pool is not listed.

  This configuration is not supported?  Is there a parameter required to allow connects to RDS Desktops?

  Thank you very much!

  Update:

  I found this article:https://techsupport.teradici.com/link/portal/15134/15164/Article/2479/Do-PCoIP-zero-clients-support-Microsoft-Remote-Desktop-Services-15134-2479

  After that I updated one of the clients Tera2 zero to 4.7, I was able to connect to the RDS office pool.

  I'm glad to hear that you figured it out.  Can you mark this issue as resolved?

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• View of the horizon 3.5.0 and ThinApp v4.7 with Cisco ASA Smart Tunnel 9.3.3

  Hello

  The problem:

  Our technology smart tunnel doesn't seem to be forward traffic to our new customer from the view.  I wonder what kind of configuration changes must be considered to enable such a connection.  The error returned when searching for the host name goes in the direction of the hostname not found.  Error finding of intellectual property is related to the time-out.

  Background information and specifications:

  We are in the process of upgrading our servers from 5.2 to 6.2 connection.  As part of the upgrade, we want to improve our customers for the Horizon to use version 3.5.0.  To make it easier on vendors and remote computers we prefer also to our Horizon View Client with ThinApp 4.7.3 ThinApp.  We currently have a Cisco ASA, supporting a SSL VPN portal with "Smart Tunnel" technology.  The ASA is currently on firmware 9.3.3 in production, but we have access to version 9.5 in test.

  Preferred connection scenario:

  User > PC > VMware View Client (ThinApp would be) > Cisco ASA Smart Tunnel > view connection server > Virtual Office

  .exe running on the client to view ThinApp:

  It seems the ThinApp Client version view is only launching VMware - view.exe.

  .exe running from the customer view full/thickness:

  VMware - view.exe

  -ftnlsv.exe

  -vmwsprrdpwks.exe

  -ftscanmgr.exe

  There is something else to consider when the view client configuration ThinApp or thickness to work with Cisco SSL VPN Portal and the Smart Tunnel?  We should have ports configured in the client in connection with the same view Firewall works with SSL VPN Portal port redirector functionality.

  We have not been able to find any documentation on how to properly configure the smart to work with the New Horizon 3.5.2 client Tunnel.  A ticket of troubleshooting with Cisco suggests that the Smart Tunnel feature still perhaps not compatible with this new Horizon (thin or thick) client.  Currently, we are looking at other options because it is not not clear whether Cisco will be able to get us the confirmation or offer a solution without delay of our project to upgrade.  Maybe stick to the previous VMware View Client version 5.4.0 which we know work with Smart Tunnel in some situations and with the redirector port for others.

• View of the horizon 6.0

  Can you upgrade from 5.3 6.0 on the Horizon while users are connected to the Desktops.Thinking I just disabled the commissioning.

  Part of the process restarts the connection broker service.   See the upgrade guide, https://pubs.vmware.com/horizon-view-60/topic/com.vmware.ICbase/PDF/horizon-view-60-upgrades.pdf

• View of the horizon 5.2 - serial Port in use

  We are deploying a new environment of VDI, using Horizon view 5.2.  All VDI OS are Windows 7 Pro. We have a USB printer that is connected to the thin client and redirects the USB port to use COM2 on the Windows operating system.  Our software told us that COM1 and COM2 are already used by the operating system.  No idea what could be using these ports, and if there is a way to release COM2 so is available?

  Thank you!

  Stone, this problem has been resolved.  I'll post the exact steps I used in the thread: https://communities.vmware.com/message/2322994#2322994

  Thank you for your help to fix this.

• Media Player / my computer shuts down to the down/restart after hybranation... event viewer displays the following errors: 14353, 14349, 1101 6009 1001 and 7000; is there a download to fix this problem?

  My computer restarts several times.  The event viewer displays the following errors: 14353, 14349, 1101, 6008, 1001, 7000.  I know it's related to windows media player.  Is there a download or a patch for this problem?

  Hello John Dorch,.

  1. which version of the operating system is installed on your computer?

  2 did you change on your computer before the show?

  We need more information on the topic to provide you with the best solution.

• In the Menu background, recently closed recently closed tabs and Windows Options are not enabled

  Recently closed recently closed tabs and Windows Options are not enabled.
  I tried to reinstall and upgrade to firefox v4 and nothing has changed.

  • Make sure that you do not run Firefox in private - browsing using Firefox without saving the story mode (permanent).
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "automatically start Firefox in a private browsing session.
  • Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

• error message "the website has encountered a problem and cannot display the page you are trying to see." and [error number: 0 x 80244019]

  Running Windows XP Pro Service Pack 2. 32-bit version. Recently, I reformatted my hard drive and reinstalled Windows XP. I try to install service pack 3 - and have tried to use the express and custom update options.

  I get the following error:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  [Error number: 0 x 80244019]

  Hi g.dodge,

  First check your level of service pack by clicking on the button start, clicking on "Run" and type "Winver"in the Run dialog box. Click on 'Ok'. If you already have SP2 installed,

  Download and install Win XP SP3 from the link below.

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24

  Note: You can ignore the it professional and network installation warning.

  After the installation is complete, restart your computer tand visit the windows update Web site to download and install the latest security updates.

  Good luck.

• Must be able to open the .csv file in Excel separated by two, and; -Windows 7 list separator

  Original title: list separator Windows 7

  Hi, I was wondering is it possible to add 2 values to list separator?  I need to be able to open the .csv file in Excel separated by two, and;  At the moment I can only do that if I continue to change the list separator value in the regional settings of Windows Alternatively, depending on which file I want to open.  Is it possible to add both?  I tried to add, and; separated by spaces, but it did not work.  Any suggestions would be much appreciated! Thank you!

  It may be one, sorry.  But you can use an Excel template or Excel macro to analyze and open any kind of delimited file of reproducibly (even give you one-click button on the toolbar in Excel to do if you wish), and this is probably the best option.

• is the number of identical series for a mac and windows version

  I bought CS6 standard in 2012.  This is the mac and windows version. Is the number of identical series for both?  I started with windows and now have a mac pro.  Adobe does not accept the serial number.  I already have activated 2 computers.  I can't tell if Adobe does not accept the serial number because I reached the max activations or the mac version has a different serial number.  It just says: the serial number is not valid.

  Any suggestion would be appreciated.

  IIRC, they are different - you must contact technical support directly to solve this - we cannot do anything here to questions of activation.

• How in the world I have improve the movement of the mouse when comfort him in win 2008 and windows 7 VM?

  Hello

  I was told that there is a driver or the VM of somesort tools update that corrects the slow as hell of display performance when consoled in Win2008 R2 and Windows 7 VM

  XP and windows 2003 are very good.

  Thank you

  For Windows 2003 and XP, you need to change the hardware acceleration (see http://kb.vmware.com/kb/1011702)

  André

• Why show black screen for some of my users with a view to the horizon?

  Hello

  I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

  now I see that my status of vmware tools was obsolete is so important?

  What di I do?

  Best regards

  Babak

  As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

• View of the horizon 6 without Active Directory

  Hello

  I have a Setup with 2 ESXi servers and stand-alone server with Win 2012 and here's installed vCenter.

  I need to install 6 view Horizon for workstation 5 only, and I have not installed the Windows domain and Active Directory.

  How can I install Horizon?

  I read that a prerequisite is AD.

  Can you help me?

  Thank you

  You could install the Direct Connect agent instead, which does not require an announcement but you won't be able to do any brokerage.

  Linjo