506th PIX IPSEC VPN allow authentication for local users?

Similar Questions

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• Enforce the complexity of password for local users

  It is possbile to enforce complex password for users the Cisco ASA firewall and/or IOS devices? Do not through an AAA server, but local users configured within the ASA/IOS itself?

  I apologize if this isn't the right forum to ask this question.

  Hello

  I don't think it's possible.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Test command of the AAA for EAP - TLS authentication for wireless users

  Hi all

  Can anyone suggest me the test command to verify the eap - tls authentication for the Cisco WAP's wireless.

  If it's an authetication jump we can use the command to test the connection below

  Radius of group aaa Testwap-01 #test [email protected] / * / o4 & yJ) NoL$ new-code %0
  Trying to authenticate with the server radius group
  User successfully authenticated

  But eap - tls is not delivered with the password. He insists that for the user name.

  We strive for remote location then test remotely before production.

  If someone help pls in that if we have a command to test or debug command to test this authentication.

  EAP - TLS requires a client certificate. How can you have a simple command that analysis without loading any certificate on the router/switch? It does not exist. This is why eap - tls is not considered an easy to deploy eap method: because it can go wrong on several levels.

  The aaa command test performs a PAP authentication, therefore, it tests the connectivity of the base RADIUS and name of user and password.

  If it works, the only thing that can break for eap - tls are certificates, as well as the radius server will be able to tell if something worng.

• PIX IPSec VPN with Cisco 877W

  Hi all

  I am trying to create a VPN between a PIX and a Cisco 877W tunnel but can't seem to get the tunnel. When I do a 'sho crypto session"on the Cisco 877, I get, he said session state is declining, then changed to NEGOTIATE DOWN, but it is now down again... Please find attached the configs for both ends... Are there commands to confirm that the tunnel is up other than to try to ping the remote end? I would greatly appreciate any help lift this tunnel.

  Kind regards

  REDA

  Hello

  Based on the configurations of joined, to do some changes. For example:

  1. the isakmp policies do not match on the router and the pix. Make sure the hash group Diffie-Hellman and life correspond on the 877 and pix.

  2. the access list for the ipsec traffic must be images of mirror of the other.

  3. make sure life of ipsec on the two peers.

  I hope it helps.

  Kind regards

  Arul

  Rate if this can help.

• 506th PIX and VPN client - multiple connections connections

  I have a PIX of the 506th (6.2) w/3DES license and 3.6.3 VPN client software. I'm only using group user name and password to authenticate. The first user login works fine. When the second user connects, the first is finished and the second works very well. The product turned on States I should be able to have 25 simultaneous connections or site to site or customer.

  Any help will be greatly appreciated, Kyle

  Are these two users on the same site, behind a device that makes PAT? If so, then this device is causing the problem, not the PIX. The device is unable to correctly translate the IPsec packets. Unfortunately nothing you can do about it on the PIX, although the next version of the software (6.3 to your calendar of March) will have NAT - T support (which the client currently supports). Once that support NAT - T both ends, they'll be able to say that there's a PAT instrument between the two and they will automatically encapsulate everything in the UDP packets, which your PAT instrument will be able to translate correctly.

• Beta 2 - authentication for connections user [schema] issue special succeeded.

  Sorry for all the threads, tried many things. :)
  
  I have a special account of my DBA on the development server which gives me additional access to things and rocking also my diagram to the main with all tables, which makes the Assistant EF works much more reliably. It uses a username of the form user [schema] (in the above example it would be Tester [SOMESCHEMA]), which allows me to access the scheme in question.
  
  I found that this does not work in the managed provider. I'm username/password invalid logon denied when I try. Switch to the provider unmanaged, it works fine. I don't know if this is a bug or a known limit, so I thought it was worth notice. Here's the script that the DBA uses to create the account:
  

  CREATE USER tester IDENTIFIED BY somepassword;
  GRANT CREATE SESSION TO tester;
  ALTER USER SOMESCHEMA GRANT CONNECT THROUGH tester WITH ROLE RL_App_Connect, RL_App_Master_Prxy;

  RL_APP_CONNECT has: create session, alter session.
  RL_APP_MASTER_PRXY has: how to create, create synonym, create the view.
  
  Thank you!
  
  Published by: Tridus on April 17, 2013 09:46

  I was able to reproduce this problem and have filed a bug (16727322).

• How gray on Intel Graphic Media for local users?

  does anyone know how to gray on the options to prevent users, change the graphics options from Intel graphics media for Mobile?
  So if anyone knows what's different in the BIOS updates, any possibility to cancel boot devices (not only change the order)

  Hello

  You can create a limited user account, but I n t think that this option disables the function to change the graphics options.

• Authentication for ARM user restrictions

  Anyone know if it is posible to limit the users who can authenticate by using MRA?

  Thank you

  Alex

  As far as I know, there is no way to do it, if a user is enabled for IM only, phone only or UC full and you MRA, it can try to connect and should be able to. CUCM accept proxy check, assuming that the right credentials are provided.

• Persist for anonymous user

  If I set persistOrdersForAnonymousUsers = true in the basket. Properties will persist the order? Or do I have to set an additional property to set the profile anonymous true as well? Once again how to use this behavior with the cookie?

  If you are not persisted the order, the order will be transitional for this particular session and when the user has left the session he'll lose this order. Next time, when it comes to a new session will be created and a new order so, no matter which instance serves as the answer. You may have seen that the order is to take for a particular scenario in which you close just a tab on the browser, in this case, the session continues.

  I instance1 and instance2 - but when user go www.mydomain.com, if instance 1 were the cart was created, today date limit user browser comes back if this instance of time 2 is to serve the request to the anonymous user does not see the basket.

  If you are not persistent anonymous order and cookie based not allowing authentication do not, user will never see his previous cart regardless of the instance that is the answer.

  See you soon
  R

  Published by: Rajeev_R on April 15, 2013 20:13

• How can I send parameters preconfigured VPN client to a remote user

  Dear all,

  I have an ASA 5510 using VPN IP - SEC for remote users. I want to send all settings pre-configured for the VPN client.

  How can I save the configuration file and send to a remote user?

  Concerning

  Configure the vpn profile in your vpn client, and then send them the .pcf file located in the directory Program Files/Cisco Systems VPN/customer/profiles. Then all they have to do is import it into their client.

• Cisco RV220W IPSec VPN problem Local configuration for any config mode

  Dear all,

  I need help, I am currently evaluating RV220W for VPN usage but I'm stuck with the config somehow, it seems that there is a problem with the Mode-Config?

  What needs to be changed or where is my fault?

  I have installed IPSec according to the RV220W Administrator's Guide. Client's Mac with Mac Cisco IPSec VPN, I also tried NCP Secure Client.

  I have 3 other sites where the config on my Mac works fine, but the Cisco VPN router is not.

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: remote for found identifier "remote.com" configuration

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: application received for the negotiation of the new phase 1: x.x.x.x [500]<=>2.206.0.67 [53056]

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: early aggressive mode.

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: RFC 3947

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received unknown Vendor ID

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: draft-ietf-ipsec-nat-t-ike-02

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: CISCO - UNITY

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: received Vendor ID: DPD

  2013-03-07 01:55:49: [CiscoFirewall] [IKE] INFO: for 2.206.0.67 [53056], version selected NAT - T: RFC 39472013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: floating ports NAT - t with peer 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT - D payload is x.x.x.x [4500]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT - D payload does not match for 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: NAT detected: Peer is behind a NAT device

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: request sending Xauth for 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: ISAKMP Security Association established for x.x.x.x [4500] - 2.206.0.67 [52149] with spi: 1369a43b6dda8a7d:fd874108e09e207e

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: type of the attribute "ISAKMP_CFG_REPLY" from 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: connection for the user "Testuser".

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] INFO: type of the attribute "ISAKMP_CFG_REQUEST" from 2.206.0.67 [52149]

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: ignored attribute 5

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: attribute ignored 28678

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] ERROR: local configuration for 2.206.0.67 [52149] has no config mode

  2013-03-07 01:55:50: [CiscoFirewall] [IKE] WARNING: attribute ignored 28683

  2013-03-07 01:56:07: [CiscoFirewall] [IKE] INFO: purged-with proto_id = ISAKMP and spi = 1369a43b6dda8a7d:fd874108e09e207e ISAKMP Security Association.

  2013-03-07 01:56:08: [CiscoFirewall] [IKE] INFO: ISAKMP Security Association deleted for x.x.x.x [4500] - 2.206.0.67 [52149] with spi: 1369a43b6dda8a7d:fd874108e09e207e

  Hi Mike, the built-in client for MAC does not work with the RV220W. The reason is, the MAC IPSec client is the same as the Cisco VPN 5.x client.

  The reason that this is important is that the 5.x client work that on certain small business products include the SRP500 and SA500 series.

  I would recommend that you search by using a client VPN as Greenbow or IPSecuritas.

  -Tom
  Please mark replied messages useful

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• IPSec VPN pix 501 no LAN access

  I'm trying to set up an IPSec VPN in a basic small business scenario. I am able to connect to my pix 501 via IPSec VPN and browse the internet, but I am unable to ping or you connect to all devices in the Remote LAN. Here is my config:

  : Saved

  :

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  nameif ethernet0 WAN security0

  nameif ethernet1 LAN security99

  enable encrypted password xxxxxxxxxxxxx

  xxxxxxxxxxxxxxxxx encrypted passwd

  host name snowball

  domain xxxxxxxxxxxx.local

  clock timezone PST - 8

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  No fixup not protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  acl_in list of access permit udp any any eq field

  acl_in list of access permit udp any eq field all

  acl_in list access permit tcp any any eq field

  acl_in tcp allowed access list any domain eq everything

  acl_in list access permit icmp any any echo response

  access-list acl_in allow icmp all once exceed

  acl_in list all permitted access all unreachable icmp

  acl_in list access permit tcp any any eq ssh

  acl_in list access permit tcp any any eq www

  acl_in tcp allowed access list everything all https eq

  acl_in list access permit tcp any host 192.168.5.30 eq 81

  acl_in list access permit tcp any host 192.168.5.30 eq 8081

  acl_in list access permit tcp any host 192.168.5.22 eq 8081

  acl_in list access permit icmp any any echo

  access-list acl_in permit tcp host 76.248.x.x a

  access-list acl_in permit tcp host 76.248.x.x a

  allow udp host 76.248.x.x one Access-list acl_in

  access-list acl_out permit icmp any one

  ip access list acl_out permit a whole

  acl_out list access permit icmp any any echo response

  acl_out list access permit icmp any any source-quench

  allowed any access list acl_out all unreachable icmp

  access-list acl_out permit icmp any once exceed

  acl_out list access permit icmp any any echo

  Allow Access-list no. - nat icmp a whole

  access-list no. - nat ip 192.168.5.0 allow 255.255.255.0 172.16.0.0 255.255.0.0

  access-list no. - nat ip 172.16.0.0 allow 255.255.0.0 any

  access-list no. - nat permit icmp any any echo response

  access-list no. - nat permit icmp any any source-quench

  access-list no. - nat icmp permitted all all inaccessible

  access-list no. - nat allow icmp all once exceed

  access-list no. - nat permit icmp any any echo

  pager lines 24

  MTU 1500 WAN

  MTU 1500 LAN

  IP address WAN 65.74.x.x 255.255.255.240

  address 192.168.5.1 LAN IP 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool pptppool 172.16.0.2 - 172.16.0.13

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global (WAN) 1 interface

  NAT (LAN) - access list 0 no - nat

  NAT (LAN) 1 0.0.0.0 0.0.0.0 0 0

  static (LAN, WAN) 65.x.x.37 192.168.5.10 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.36 192.168.5.20 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.38 192.168.5.30 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.39 192.168.5.40 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.42 192.168.5.22 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.43 192.168.5.45 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.44 192.168.5.41 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.45 192.168.5.42 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.46 192.168.5.44 netmask 255.255.255.255 0 0

  static (LAN, WAN) 65.x.x.41 192.168.5.21 netmask 255.255.255.255 0 0

  acl_in access to the WAN interface group

  access to the LAN interface group acl_out

  Route WAN 0.0.0.0 0.0.0.0 65.x.x.34 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  NTP server 72.14.188.195 source WAN

  survey of 76.248.x.x WAN host SNMP Server

  location of Server SNMP Sacramento

  SNMP Server contact [email protected] / * /

  SNMP-Server Community xxxxxxxxxxxxx

  SNMP-Server enable traps

  enable floodguard

  the string 1 WAN fragment

  Permitted connection ipsec sysopt

  Sysopt connection permit-pptp

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  client configuration address map mymap crypto initiate

  client configuration address map mymap crypto answer

  card crypto mymap WAN interface

  ISAKMP enable WAN

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup myvpn address pptppool pool

  vpngroup myvpn Server dns 192.168.5.44

  vpngroup myvpn by default-field xxxxxxxxx.local

  vpngroup split myvpn No. - nat tunnel

  vpngroup idle 1800 myvpn-time

  vpngroup myvpn password *.

  Telnet 192.168.5.0 255.255.255.0 LAN

  Telnet timeout 5

  SSH 192.168.5.0 255.255.255.0 LAN

  SSH timeout 30

  Console timeout 0

  VPDN group pptpusers accept dialin pptp

  VPDN group ppp authentication pap pptpusers

  VPDN group ppp authentication chap pptpusers

  VPDN group ppp mschap authentication pptpusers

  VPDN group ppp encryption mppe 128 pptpusers

  VPDN group pptpusers client configuration address local pptppool

  VPDN group pptpusers customer 192.168.5.44 dns configuration

  VPDN group pptpusers pptp echo 60

  VPDN group customer pptpusers of local authentication

  VPDN username password xxx *.

  VPDN username password xxx *.

  VPDN enable WAN

  dhcpd address 192.168.5.200 - 192.168.5.220 LAN

  dhcpd 192.168.5.44 dns 8.8.8.8

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd enable LAN

  username privilege 0 encrypted password xxxxxxxxxx xxxxxxxxxxx

  username privilege 0 encrypted password xxxxxxxxxx xxxxxxxxxxx

  Terminal width 80

  Cryptochecksum:xxxxxxxxxxxxxxxxxx

  : end

  I'm sure it has something to do with NAT or an access list, but I can't understand it at all. I know it's a basic question, but I would really appreaciate help!
  Thank you very much
  Trevor

  "No. - nat' ACL doesn't seem correct, please make sure you want to remove the following text:

  do not allow any No. - nat icmp access list a whole

  No No. - nat ip 172.16.0.0 access list allow 255.255.0.0 any

  No No. - nat access list permit icmp any any echo response

  No No. - nat access list permit icmp any any source-quench

  No No. - nat access list permit all all unreachable icmp

  No No. - nat access list do not allow icmp all once exceed

  No No. - nat access list only allowed icmp no echo

  You must have 1 line as follows:

  access-list no. - nat ip 192.168.5.0 allow 255.255.255.0 172.16.0.0 255.255.0.0

  Please 'clear xlate' after the changes described above.

  In addition, if you have a personal firewall enabled on the host you are trying to connect from the Client VPN, please turn it off and try again. Personal firewall of Windows normally blocks the traffic of different subnets.

  Hope that helps.

• Cisco VPN Client Authentication - PIX 515E-UR

  Hi all

  I need your expert help on the following issues I have:

  1. I would like to create more than 1 client VPN on my PIX-515E groups. This is so that I can give a different part of the internal network access to different type of VPN connection. For example, I want a group to have no XAUTH, while the other group must use RADIUS XAUTH. Is it possible for me to do this? I see the PIX automatically enable RADIUS on both groups of VPN clients.

  2. the RADIUS server is a Microsoft ISA with IAS server and it is located on the PIX inside interface. The VPN endpoint is external interface of the PIX. Is there a problem with this Setup? Do I need to have the RADIUS server that is located on the external interface?

  3 can. what command I use to debug RADIUS authentication?

  Thanks in advance for your help.

  Hi vincent,.

  (1) you can use the vpngroup *-authentication server ipaddress to specify the IP address of the Radius Server on a particular group... If you do not specify this, the authentication of the user is made locally... also check for vpngroup * order of user authentication

  (2) there should be no problem with the installation of your... should work fine... If the RADIUS is outdoors, it is subject to many attacks... so have it inside...

  (3) use the "RADIUS session debug" or "debug aaa authentication..."

  I hope this helps... all the best... the rate of responses if found useful

  REDA