5700 of monitor-AMD radeon video card

monitor-AMD radeon 5700 video card. yesterday, I booted up my PC and there was a line vertical dead center of my screen. on the left side of the screen of the line its strong vibrant colors of normal windows. but on the right side of the line of her look very faded. I then get pixels build up, until finally, it crashes with the horrible blue screen, we learned to love. my questions, have you ever seen this happen? not sure if my monitor told his last story, or is it my video card. Ive tried everything. Thank you

Hello

To help you, we suggest you try another monitor. If it of always the same, contact the manufacturer of your computer to allow you to check the status of the video card.

Kind regards.

Tags: Windows

Similar Questions

  • HP Pavilion dv7t-6100: switch to ATI RADEON video card. Hang, reboot, and white screen.

    Hello.

    I was using my laptop as usual, and like many other times I have tried to swich for High Performance video card.  At this time, Windows crashes; So I had to press the power button a few seconds until the computer turns off.

    Then, when I turned it on:

    -Anything on the screen (on the screen of the computer laptop and external monitor)

    -Cannot access BIOS

    -No boot sequence (operating system does not)

    -Led is ON (without LEDs + turn signals)

    -Keyboard unresponsive (caps lock led for instance does not change when I press on it)

    I tried several suggestions "base" that I found on the Internet with no luck:

    -Unplug the power cable, remove the battery

    -Remove the battery from the BIOS, RAM, HARD drive

    -Press the on switch / off 60 seconds

    So I guess something is dead here.  Could it be that the RADEON card no longer works?

    When the computer is turned on, what card uses by default?

    Is it possible (not through BIOS, not through OS) to specify to use the integrated graphics card Intel? Removing the RADEON card (is that even possible)?

    Thanks in advance.

    Hi @fedecris,

    Thank you for the update. Q0F7E4-5R7894-MFH14K-403 P 03 error code indicates a failure of the memory module. Please see the guide to maintenance and maintenance for recommended replacements. (the link is in my post above) Note Chapter 3, page 31, paragraph 23.

  • Inspiron 15R (5520)-"Defective keyboard" and "defect with the 1 GB AMD radeon graphics card".

    inspiron 15R(5520)
    
    Problem wid the 1gb AMD radeon(HD 7670 M) Graphic Card and some keyboard keys. Graphic card is not identified. shows in Device manager but dosen't work. I have problem wid some of ma keyboard keys. I have to tap it twice or thrice to write.. Called up da customer support many times but no good response... I'm really exausted, Plz help...
    

    Hi Jelena,

    Sorry for the delay. If the operating system was already reinstalled and the scan of the PC came with an error, the video card will be replaced. Please click on my username and add me as a friend. Please provide the number of service system, the owner's name and contact number by only private message. I check the details of the system warranty and help you with this question.

  • Dell inspiron 3521 (i5), how to configure Radeon video card laptop use as main graphics card?

    Hello guys.

    IM using Dell inspiron 3521 (version i5 to 1.7 ghz, Radeon HD 7670 M / Intel HD Graphics 4000, 6 GB of ram)

    I don't want to use the Intel HD video card at all, because the quality of the texture is so low. I would like to know, how to set up the main video card?

    Its possible?

    Thank you

    The 'main' video chip is the Intel one - it's the only one who has a connection to your display board.  The AMD GPU is a co-processor - it can be used (chosen from the AMD Catalyst Control Panel) for the applications you want to use it.

    It CAN be made the default GPU - GPU from Intel's wired for this role.  By design, all of the video data through the Intel GPU (which is part of the central unit of system processing).

  • retina iMac 5K AMD Radeon graphics card will be a problem for first Pro CC and AE?

    So far, I had no problem all editing of images 4K scaled down in 1080 p timelines in Adobe first Pro CC on my 2012 iMac i7 with these specs:

    iMac i7.png

    Now I am considering upgrading to the iMac 5 K retina with the following maximum out-of-specs:

    Retina iMac 5K.png

    • I will be maxing out the DDR3 RAM 32 GB with third-party RAM sticks, probably OWC.

    But I read in various forums that even the iMac of retina 5K upgrade AMD Radeon R9 M295X 4 GB memory GDDR5 graphics card would not be able to handle video editing in Premiere Pro or AE CC effects. That would require an NVIDIA card that Apple chose to end their 5 K retina iMac.  I guess that I can't understand how a 2014 maxed out retina 5K iMac would not at least as powerful as a 2012 iMac i7.

    As I use programs Adobe CC to my creative work, I don't want to upgrade to an iMac that can't handle 4 K editing in a 1080 p timeline just because of a change in graphics cards.

    What are your thoughts? Anyone working in first Pro CC in view of the retina of the iMac?

    Yes, I did. Used for months and it works great

    Ryan Connors

    www.ryanconnors.me

  • ASUS VS247H 23.6 "LED LCD, is detected by the generic devices such as 'PNP monitor' Manager My video card is detected correctly. Win 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers

    This monitor works fine but is detected by the generic as 'PNP monitor' Device Manager. My video card is detected correctly. I am running Windows 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers. I checked the Asus support and they do not have a monitor driver.

    Any comments would be appreciated.

    Roger,

    I'm glad to hear that.

    Just to let you know, it is often the case with the monitors.

    They will be the "default"setting, but still have the correct driver.

    Happy computing,

    B Eddie

  • Windows 8 on AMD Radeon graphics card is not completely fill the screen

    Just installed Windows 8 Pro on a Dell Inspiron Zino HD with an AMD Radeon HD 4300 Series.

    Display is a LG on HDMI monitor.

    Installation went well apart from my screen Windows does not fill my entire screen.  I don't think it's something to do with the resolution of the screen, it's just the way that 'image' does not fill the screen correctly.

    Hello

    Did you install these legacy AMD official drivers?
    There is also a setting in the Catalyst Control Center associated with overscan (he has a slider).
    This one should expand your image to fill the edges of the screen.
    Carlos
  • HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.

    Windows 7 can not find the graphics card for the amd radeon 8650g.  I tried to install the drivers from AMD and they never appear in the Device Manager.  It only gives me "Standard VGA Graphics Adapter."  Windows Update will not update.  They say that it is current because it cannot find the radeon 8650g.  AMD Setup never shows the driver file during installation.  It installs all sorts of other things, but never the driver.  As if it does not find material.

    What is going on.

    Hello:

    Your laptop is not supported by HP for Windows 7.  There is no graphic drivers for W7 for it to HP.

    My only suggestion is to try the graphics drivers from the Lenovo G505s

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764

  • Laptop will not switch to the AMD Radeon graphics card

    Hello.  I just bought a Dell Latitude 3540 on 10/01/13 (yesterday) and everything but the graphics go a lot.  Whenever I check the graphics that are used, it says "Intel HD Graphics 4400" instead of 'AMD Radeon HD 8850 M' as it should be.  I installed the Catalyst driver and software and plugged in, but also put everything for maximum performance in the config of switch graphics.  I EVEN USED PC RESET.  NOTHING WORKS.  Help, please.

    Hello

    What is the version of the Catalyst driver and software you use?

    The option to switch between graphics depends on the version of the installed Catalyst driver. I suggest you follow the article given below for further assistance.

    Map chart AMD laptops and drivers FAQ

    http://support.AMD.com/en-us/KB-articles/pages/LaptopsFAQ.aspx

    Email us if you have any further questions. We will help you to come.

  • can I add a dedeicated radeon video card to a computer laptop dv7 - 6123cl?

    Hello, I just bought a computer laptop dv7 - 6123cl and I was wondering if I can add a dedicated graphics radeon card

    Hello

    I do not think, he has Intel HD Graphics 3000, you need a new mother/system board and a new cooling system to be able to do that means buying a new machine.

    Kind regards.

  • Have I not AMD Radeon HD M 7730 2 GB video card on my new laptop Inspiron 15R?

    Hello

    Last week I received the delivery of Dell, with my new Inspiron 15R laptop.

    I struggled again to learn how to use Windows 8 more comfortably (to be able to perform the same actions/tasks as in Win XP or Win 7), discovered playing around the Panel, in the section of the graphics card, I was surprised and frightened the driver installed is "Intel Graphics 4000.

    I was shocked! I specifically paid for AMD Radeon HD 7730 M 2 GB video card!

    I searched on the driver CD that came with the laptop, I found the driver for AMD Radeon video card. I installed it. Then I disabled the driver Intel Graphics 4000.

    Windows have complained about this version of the AMD Radeon driver, turn it off and turn it on (and of course installed) driver Intel Graphics 4000!

    Question:

    Have I not AMD Radeon HD M 7730 video card in my laptop? Is this a problem of driver on Windows 8, or Dell forgot to put this video card more expensive on my laptop?

    Maybe I'll take a look in the BIOS, it should include all hardware components.

    I can't believe you posted just your device manager, display the map in question . What the hell was all panic.

    I foolishly assumed when you said you looked at graphics cards configuration panel, you mean you couldn't see in the Device Manager.

    Thanks Ejn63

  • Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

    Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

    Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

    When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

    To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

    Others would agree with this statement?

    Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

    I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

    Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

    Thank you.

    Doug

    If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

  • AMD Radeon HD7470 with two monitors

    Hello

    I have an Optiplex 7010 with an AMD Radeon HD7470 card with 2 connected screens: a 23 "monitor connected to the HDMI port with HDMI/DVI adapter, and a 17" monitor connected to the DVI port with DVI/VGA adapter. Despite the 'strange' way to connect monitors, the image is sent to two of them. Problem is I managed only to have the image duplicated on both screens (with a single resolution, which makes the strange image on the 23 "), but I needed to extend the image, since 2 applications must be run at the same time but on different screens, so I can watch both at the same time. Also, when I go to display controls on the PC, a single monitor is recognized. Is it possible to have PC recognizing both screens and to be extended, so I can put different resolutions on each monitor and have applications open on each screen?

    Hi Luigi1967,

    Driver AMD Radeon HD7470 must be installed in order to have the multi-screen work display correctly. Are the drivers of your computer up to date? If this isn't the case, please download and update the drivers from here if your computer is Windows 7, Windows 8 download the drivers from here. To know exactly how to update the drivers to watch this video.

    I hope this helps.

  • AMD Radeon R7 E460 graphics card problem

    Hello

    I bought a new Lenovo E460 Full HD with the graphics card AMD Radeon R7 M360 inside. I also asked a + 4 GB of ram, so I now have 8 GB. My problem is that I constantly freezes when I use a video editing software and 3d. It's a regular shift, like every few seconds. 1.2.3.. gel 1.2.3.freeze etc. I also tried to change a lower quality in the software properties, but nothing changes. If this happens when I use the AMD Radeon graphics card. When I use the graphics Intel HD 520, AMD drivers uninstalled or just fashionable, the problem disappears energy saving. I tried with AMD drivers Lenovo site, also the site of AMD, I tried to update the drivers for Windows 10 too, the problem persists. GPU - Z, I installed and I saw that the bus PCIe 4 x all the time when graphics software is used instead of x 8 supported. I don't know if this is normal. This is a brand new laptop (2 weeks) and I can't do my job on a daily basis like this. Help, please!

    Thanks in advance,

    Concerning

    RHW

    Hello

    The new beta driver AMD Crimson edition 16.1 has solved my problem. He was released a few days ago. Try it, see if it works for you also.

    http://support.AMD.com/en-us/KB-articles/pages/AMD-Radeon-software-Crimson-Edition-16.1-hotfix-relea...

    See you soon,.

    RHW

  • Impossible to change the video card Intel for radeon

    Model: vpcsc1afm

    I just upgraded to windows 8 and when I go to change my video card 3000 from low power to high power AMD radeon 6470 card Intel video.  I wonder if the problem is that there is not any software for the power switch that changes computer from endurance to speed. Help, please!

    I already tried this twice by making sure that the power switch has been changed for housing suitable for each drivers before installation.  The driver is also enabled in Device Manager.  I had this same problem when I tried on the bata, but I managed to solve the problem by installing the drivers.  When in the bata, it was easy to tell that the pilots were the problem because the power to speed up the computer has crashed and after reinstalling the drivers it worked fine.  Here, when applying power to the speed, nothing happens.

Maybe you are looking for