Laptop will not switch to the AMD Radeon graphics card

Similar Questions

• HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.

  Windows 7 can not find the graphics card for the amd radeon 8650g.  I tried to install the drivers from AMD and they never appear in the Device Manager.  It only gives me "Standard VGA Graphics Adapter."  Windows Update will not update.  They say that it is current because it cannot find the radeon 8650g.  AMD Setup never shows the driver file during installation.  It installs all sorts of other things, but never the driver.  As if it does not find material.

  What is going on.

  Hello:

  Your laptop is not supported by HP for Windows 7.  There is no graphic drivers for W7 for it to HP.

  My only suggestion is to try the graphics drivers from the Lenovo G505s

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764

• HP Pavilion p6-2143w: motherboard will not switch to the graphics card: Sapphire Nitro R7 370 4 D5

  Plug
  The APU A6 - 365 graphics AMD Radeon HD 2.60 GHz
  8 GB ram corsair
  B800M Max Bron Lepa PSU
  Windows 7 64-bit Ultimate

  My problem is that the jury is not automatically pass to the Sapphire Nitro R7 4 370 D5 card. All I get is a black screen. I tried to disable graph embedded in the Device Manager with no luck.

  I also tried looking for a bios update, but I couldn't find one that was on the hp Web site.

  Please help I don't want to buy a new motherboard and cpu.

  Hello

  Most graphics cards require BIOS version 8 HP.  BIOS version 8 is listed under Windows 8 for your particular model PC.  While the BIOS version 8 will probably support your new graphics card, you might find yourself stuck that Windows 7 will not work using the UEFI. You can install BIOS and then turn on legacy mode and see if the card works. However, if the card is a single card UEFI well then you are in a situation of 'catch' 22 In this case, you would have the BIOS later and W7 should always work in legacy mode.  Even with this BIOS update running in mode inherited that there could be some risk that W7 will not work.  Once you update the BIOS there is no coming back.

  Another thought.

  There are no Windows Ultimate 10 version if upgrading to W10 (free upgrade) would you put on the professional version W10. I do not know if that would suit your needs. However, if you have a place in the upgrade by using the W10 iso DVD or flash drive then you could extract the W10 license key so that your could do a clean install with legacy mode turned off in the BIOS that puts your PC into UEFI mode.

  You have a few risks to consider.  In addition, HP has not posted the W10 for your PC drivers.

  What would I do?  I'd go for it, but then my wallet could be deeper than yours.

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• Satellite P100-160, not compatible with the latest games graphics card

  My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

  Recently, another solution I've heard of is an external graphics such as the Asus XG station...
  http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
  either this...
  http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

  However these devices large need an express card slot, which I'm not sure that this laptop has even?

  If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

  Thank you

  Richard

  Hello

  The Intel graphics card is simply not powerful enough to handle the latest PC games.
  You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

  The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
  You cannot add also all other ports for laptop. It is not possible :(

• BT Yahoo mail will not switch to the new style when using Firefox

  I had to do a re - install under the motherboard has failed. I use BT Yahoo email. On the home page, I get a link "switch to the new BT Yahoo! Mail". That is the link allows to set up the new style and I can then do what the home page and opening in the new style every time. In Firefox help happens nothing other than 'click' navigation and a brief glow and I am still on the old.

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

  Here are the steps to make a clean reinstall for reference.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

• Old laptop will not come to the top. To get the files and documents for the new laptop

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you

  Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?

  I do not know. The answer depends on what's wrong with the old.

  Can I do this using a USB Flash drive?

  # If you can not start the old laptop, you cannot transfer files from it
  to the USB.

  If the problem with the old laptop isn't that hard drive has
  has failed (and that's a big 'if'), you can pull the hard drive.
  and get an external USB enclosure. Having done this, you can read
  It is on the new laptop and copy files from it.

  Ken Blake (MS-MVP)

• Windows 8 on AMD Radeon graphics card is not completely fill the screen

  Just installed Windows 8 Pro on a Dell Inspiron Zino HD with an AMD Radeon HD 4300 Series.

  Display is a LG on HDMI monitor.

  Installation went well apart from my screen Windows does not fill my entire screen.  I don't think it's something to do with the resolution of the screen, it's just the way that 'image' does not fill the screen correctly.

  Hello

  Did you install these legacy AMD official drivers?
  http://support.AMD.com/us/KbArticles/pages/catalystlegacywin8.aspx
  There is also a setting in the Catalyst Control Center associated with overscan (he has a slider).
  This one should expand your image to fill the edges of the screen.
  Carlos

• Re: My Satellite laptop will not load to the top

  Hello

  My laptop isn't even a year yet, it worked fine until today.
  I turn it on and the bit of Toshiba comes up then after that it of just a black screen and then it says

  Realtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
  PXE - e61 media test failure, check cable of
  PXE - mof exiting pxe rom.
  no boot device - insert boot disk and press any key

  I put t have a startup disk or anything! Fact does not matter what it means?

  Thanks for any help

  Layla

  Each book has specific boot order and in this boot order components of different material as drive optical drive, hard drive, or LAN.

  The start is always set in the BIOS settings and nothing, for instance HARD, LAN and ODD disk boot order. If the laptop can not boot from HDD ist starts from second defined device (LAN) and continue.

  Boot order of your laptop satellite does not for me, but somehow, it stays on the startup of the LAN device option and you can see this message on the screen.

  Restart your laptop, and press F2 to enter the BIOS settings. The default value and try again. If the same start arriving portable once again but this time with the F12 for boot options-enter key. With top and bottom arrows have chosen press and device disk HARD come. If the HARD disk is OK, OS should load up. If this is not the case, there is a problem with the operating system preinstalled.

  Please test and send feedback.

• Laptop will not power after the installation of the update vista on 28/04/2015

  On April 28, 2015, I installed vista was last updated and checked "Shut down after installation" now I am unable to power my laptop.  Laptop is still connected to the power supply which is OK.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or working knowledge of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Laptop will not connect to the printer

  Hello.. I tried several of the suggestions in this area, but none seems not to work. I have problems with the laptop (HP Pavilion) running vista 64-bit. The main computer which is where the printer and modem are connected is on vista 32 bit. I thought it was a problem of... downloaded driver download drivers 64 bits to LEXMARK (p4350). Downloads, starts the process of intstallation, she can never finish the installation as iI comes to a point where I change the local port to the printer-name of computer name... Then, he goes in the wizard and asks the printer... It does not appear in the list, and I try to go in the C\drivers\folder. (ect.) where the new download is installed. Always get the .inf file cannot find... I still see that the printer in the network-it just keeps giving me the error... The server for the lexmark no has not the correct driver... takes back me to the previous step... It's driving me crazy... have spent countless hours trying to understand. any help?

  Hi sandielez3

  You can download and install the firmware update and then reinstall the printer with the driver Windows Vista driver.

  Before you install the driver, please uninstall the driver exist.

  Remove the printer

  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  2. find the icons that are associated with the printer, and then remove them.

  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.

  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  6. try to remove all related printer software.

  Reinstall the driver. After that, follow the steps below.

  Add a shared printer

  1. click on start, click on Control Panel and double-click Printers.

  2. the keyboard, press Alt, and then click the file-> run as administrator-> add printer.

  When the UAC window appears, click on continue to go.

  3. Select "add a local printer.

  4. Select create a new port ". Select "Local Port" as the port type.

  5. in the "Enter a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  6. follow the instructions to complete the installation. During the installation, when you lorsque vous etes are invited to choose a good driver; Click the "disk".

  7. navigate to the file .inf. click OK.

  8. wait until the process ends.

  If the problem persists, the driver may not work with shared printers. I suggest you contact Lexmark technical support and confirm if there is a problem in their drivers.

  http://www.Lexmark.com/Lexmark/sequentialem/home/0, 6959, 204816596_689444666_0_en, 00.html

  Please visit these links to learn more:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron 15R (5520)-"Defective keyboard" and "defect with the 1 GB AMD radeon graphics card".

  inspiron 15R(5520)
  

  Problem wid the 1gb AMD radeon(HD 7670 M) Graphic Card and some keyboard keys. Graphic card is not identified. shows in Device manager but dosen't work. I have problem wid some of ma keyboard keys. I have to tap it twice or thrice to write.. Called up da customer support many times but no good response... I'm really exausted, Plz help...
  

  Hi Jelena,

  Sorry for the delay. If the operating system was already reinstalled and the scan of the PC came with an error, the video card will be replaced. Please click on my username and add me as a friend. Please provide the number of service system, the owner's name and contact number by only private message. I check the details of the system warranty and help you with this question.

• retina iMac 5K AMD Radeon graphics card will be a problem for first Pro CC and AE?

  So far, I had no problem all editing of images 4K scaled down in 1080 p timelines in Adobe first Pro CC on my 2012 iMac i7 with these specs:

  

  Now I am considering upgrading to the iMac 5 K retina with the following maximum out-of-specs:

  

  • I will be maxing out the DDR3 RAM 32 GB with third-party RAM sticks, probably OWC.

  But I read in various forums that even the iMac of retina 5K upgrade AMD Radeon R9 M295X 4 GB memory GDDR5 graphics card would not be able to handle video editing in Premiere Pro or AE CC effects. That would require an NVIDIA card that Apple chose to end their 5 K retina iMac.  I guess that I can't understand how a 2014 maxed out retina 5K iMac would not at least as powerful as a 2012 iMac i7.

  As I use programs Adobe CC to my creative work, I don't want to upgrade to an iMac that can't handle 4 K editing in a 1080 p timeline just because of a change in graphics cards.

  What are your thoughts? Anyone working in first Pro CC in view of the retina of the iMac?

  Yes, I did. Used for months and it works great

  Ryan Connors

  www.ryanconnors.me

• XP Mode in Windows 7 does not detect the ATI Radeon graphics card

  Hi, on windows 7, xp (virtual), the system mode does not detect my graphics (ATI Radeon HD4530). This card is indispensable to run a business application (multimedia program). Can you please help me.

  Thank you, Christian.

  * original XP mode with title - __Windows 7 - (virtual) with ATI radeon HD4530__Christian.* graphics card

  Windows XP mode provides a virtual hardware platform to run XP programs.  With the exception of some USB devices, it does not provide a direct access to the hardware on the host computer.

  If you need to use your real graphics hardware in XP you will probably have to put in place a system to dual-boot and boot XP when necessary.

• Satellite C850: Ability to switch to Intel GPU Radeon graphics card

  Model is Toshiba C850 - possible to change my 7610 M Radeon graphics to the graphics card Intel integrated on the CPU?

  N °
  Something like this is not possible.
  Hardware upgrade on laptops is very limited.

  Check please follow document Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm