6 of Lightroom on iMac. Unable to access via the icon.

Similar Questions

• Problem with progress-access via the icon on the screen

  I have Windows 7 on my DELL laptop. When you try to open any program through its icon on the screen, another specific program is open.

  Hello

  Please contact Microsoft Community.

  You can try these methods to solve the problem.

  Method 1:

  
  Step 1: check if the problem exists in Mode without failure.

  You can follow the instructions here to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Check if you are able to access the records.
   
  Step 2: The problem of clean boot.
  If the problem does not exist in safe mode, a program can be at the origin of this problem.
  You can start the computer in a clean boot to solve problems and identify a cause.

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made please follow "step 3: reset the computer to start as usual" on the article to start the computer in normal mode.
   

  Method 2: Run the Security Analyzer.

  You can check for a virus running the Microsoft Safety Scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Feel fresh coming back to us for assistance.

   

• I was migrating my main domain and email to the catalyst for business, during which I've updated successfully my adobe connect account however I am now unable to access to the my dashboard sales catalyst or support?

  I was migrating my main area which had previously been hosted elsewhere and his email to the catalyst for business.

  I needed to re-create a mailbox which was also my adobe signon

  so I've updated (successfully) my account login from adobe to another e-mail address

  However, I am now unable to access to the my dashboard sales catalyst or support if I can sign here.

  So I'm partially migrated but completely messed...

  Any help appreciated because I have no idea how to get technical support... arrggghh!

  Hello

  I sent you a personal message, please follow the instructions to reach out to the support team.

• Unable to access to the following endpoint

  Hi all

  Here I man cannot call the siebel services when I try to access at the end I point receving this error and also I added oracle/no_authentication_client_policy also always problam is please any help on this

  Anomaly of the non-recoverable system:

  " < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < a name ="summary"part > < summary > oracle.fabric.common.FabricInvocationException: can't access to the following endpoint: http://10.2.100.166/eai_enu/Start.SWE?SWEExtSource=WebService & SWEExtCmd = Execute & username = etiadmin & password = etiadmin< / summary > < / piece > < part name ="details"> < detail > unable to access to the following endpoint: http://10.2.100.166/eai_enu/start.swe?SWEExtSource=WebService & SWEExtCmd = Execute & UserName = etiadmin & Password = etiadmin< / detail > < / part > < part name ="code"> < null code > < / code > < / piece > < / remoteFault > < / bpelFault > .

  
  

  
  

  Thank you

  RAM
  

  Hello

  I resolv this problem by adding this propertys.

  orawsp:category = "sΘcuritΘ".

  orawsp:status = "enabled" / >

  much = 'false' override = "may" >

  WebLogic

  much = 'false' override = "may" >

  eco123bank

  Khalil,

  RAM

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.

• Firefox is unable to access all the pages of an HTTPS site.

  We have a computer cannot access all the pages on a specific HTTPS site. I don't want to advertise the URL here. "" We can connect to the site and navagate to half pages, but the other half give ' (error code: sec_error_unknown_issuer). We have uninstalled FF and spilled the appdata. Renamed the cert db and he had to recreate. IE working on it from that computer to the website. All computers in the office can access the web site without any problems, some using ESR some with regular FF. This system uses the latest version of FF ESR, but we also tried the regular version. The only thing we haven't tried is disable the AV (Symantic). One thing I noticed, is that the URL of this web site are extremely long.

  Why the FF honors cert for some pages but not others. It also does us not add an exception.

  Thank you

   Mesept
  

  The first thing I checked was the cert chain, all certificates are valid. Time on computers is very good, the second thing I checked.

  As I said in a previous post, a few pages work, some do not which means that certificates are valid for certain pages, may not be a problem of cert, sometimes they work. Same site also works with IE and chrome on the same systems.

  Cannot ignore and accept the cert in he won't let me. Which is off and I don't know how to turn it on.

  In any case, I submitted a ticket for the owners of the website last week and now everything works.

  Thanks for the answers that I don't have a resolution, I guess that developers found a bug and fixed it.

• Unable to access all the values in the table strTPer (n)

  Filled our Table of control period has all of the following columns:
  -Target by (M)
  -Target by (Q)
  -Target by (Y)
  -Target (d)
  
  However, using strTPer (1) and be strTPer (0) returns the value in the column 'target by (D)", and we don't seem to be able to access all the column values using strPer (1), strPer (2), strPer (3) etc.
  
  If anyone has any ideas please?

  In the document of the FDM API, search on fperiodlist. There are a few options that allows you to return the contents of the table in a recordset that you may be able to search according to your selected criteria. (Or the other possibility is the two options starting fperiodkey).

  Published by: user10757003 on Sep - 03 - 2012 06:36

• Unable to update via the App Store system software or download

  Hello

  (I'm new to this forum and hopefully the below is enough for others to understand my problem)

  Since I have my Macbook Pro I have a huge problem for updating the software via the App store or by

  Download the files of the Apple update supports pages (for example osxupdcombo10.11.2.dmg).

  The ONLY way for me to update the software system is through resettlement (command-R during the boot process) of the

  system via the web, which i, in my case, a procedure of 5 hours each time.

  In the appstore, the need for updates is displayed, but when I click on the respective install button, the installation requirements

  are briefly "calculated" for 2-5 seconds, then the process stops without having to install anything.

  When I download the .dmg on the support page file, I can convert it to a .pkg file and start the installation. The process is running

  me through the entire list of subjects required to install (accept the terms, select the location to install etc etc) asks me to restart... but then

  nothing happens / past: the old version of the system continues to operate my MacBook. Using the procedure for re-Setup "command-R-Start-up.

  whenever I have slowly migrated to Yosemite to El Captain lion (now at 10.11.2), but it's certainly in the right way.

  I have been in contact with the local (German) Apple support hotline. They even have access to my computer to watch what I'm doing and how my problem

  If displays on the screen, however, could not help and promised to call back by the technician never happened.

  Recently, I was able to solve a problem of not being able to remove all the cards in 'Contacts' following a detailed recipe posted by Linc Davis in this forum.

  So I thought that Linc or someone else in the forum could help me with my problems of update.

  Thanks in advance

  PETERBBERLIN

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HFG30 unable to connect via the Android app

  Nexus 7, HFG30 - all online and printed documentation confusing. Is not clearly the distinction between applications and the use of the web browser. Nowhere is the name of this app is mentioned. Had to go back with support to find the name.

  The name of the application's access to the camera more than, unfortunately, the Pixels.

  HFG30 not in the taken list supported here. Support says that it is supported. After all, no connection. Can connect via a browser however. Anyone else?

  Hi robbif!

  Thanks for posting.

  The application CameraAccess and CameraAccess Plus is not for all our camcorders.  Some newer models, like the G30 HF, are controlled using a web browser based remote connection, instead of using the application.  For more information about this, visit our help wireless page or view the distance travel brochure HERE.

  If it is a time sensitive matter, additional support options are available to contact us.

• "NMH410 do not have access via the Explorer: name of local device already in use.

  I can't connect with my NMH410 through Explorer. It worked fine, but I must have done something wrong. Device name Local message already in use keeps popping up, even after the removal of the former as links indicated elsewhere. I changed the name of the device backward (which may be where it started). Also devices that were not previously connected Gets the same response. I tried on XP and Vista. I have also a router Linksys (WRT610N) that had me install Home Network Defender. It was a pain to get rid of it and I would not be surprised if this is part of the problem.

  I'm running out of options. I would consider same formatting for all start over, but prefer not because I have to get all my MP3 somewhere somehow... Help, please.

  Bart

  Hi bartled,

  I suggest you try to do a hard reset on your NMH410. To do a reset, while the device in operation - press the reset for 10 seconds-, and then unplug the cable (keep pressing the reset button) - wait 10 seconds - reconnect the power cable (by pressing the reset button) - wait 10 seconds before you release the reset button. Once the lights are solid, check out the "friendly name" of your NMH410 via the LCD screen. It should be to the default name "Mediahub. Try to use 'Mediahub' on your browser and check if you can access the user interface of your device.

  See you soon!

• Unable to connect via the Cisco VPN Client

  Hello

  I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

  I am not able to connect and watch the journal on the SAA

  ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

  ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

  ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

  What could be the reason.

  Concerning

  Hi, I had this same problem, here is the solution:

  When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

  Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

  Well, change your strategy using MD5 isakmp / OF would do the trick.

• Unable to connect via the Web client

  Dear team,

  Web customer service is installed on the SSO Server (SSO installed on seprate VM), since last year 1 it works very well, but as of today I m not able to connect through webclient get below error

  https://SSO.test.com:9443 / vsphere client / #.

  Unable to connect to the server vCenter Single Sign On https://SSO.test.COM:7444/ims/STSService? wsdl .

  Note: I am able to connect VC via vsphere client but not to Web client.

  concerning

  Mr. VMware

  After you restart the WebClient service, wait 5 minutes. Now, I m able to connect VC via the web client.

  Thanks for all the help and support.

• No access to iBook store. I can see the books purchased in my "library" but have been unable to access the shop via the icons at the bottom of the screen of the library. I was also unable to access the shop via one of the links at the end of the books.

  Recommended links, NY Times, Top Charts, and Top authors are not allowing me to access the iBook on my iPad store. This problem began immediately after I downloaded and opened a book called "'Adobe After Effects: A Stey by step Guide" by Richard Lee. "

  I tried all of the fixes published to access the iBook store, but nothing has worked. I don't feel this problem on my iPhone, which is synchronized to my iPad to share books.

  How to solve this problem without having to do a restore complete, please?

  "I tried all of the fixes published to access the iBook store, but nothing has worked."

  We have no way of knowing exactly what troubleshooting have you tried unless you tell us.

  If you have not yet tried, reboot your iPad.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring