Tecra A4 battery issue

Similar Questions

• A 2 month old iPod Touch 5th generation began to lose its charge the battery overnight.  East - the developer of a battery issue?

  A "renovated" old 2 months iPod Touch 5th generation just recently started losing its charge the battery during the night.  East - the developer of a battery issue?

  Perhaps. Where did you buy this device?

• Tecra M5 - battery is not save

  Hello

  I have a Tecra M5 and the computer does not start on just the battery. It is fine when pugged in the wall (with or without the battery).
  When I turn it on, it briefly displays the battery is there and even load, but it disappears after about 20 minutes.
  I tried to use a different battery, but the same thing happened.

  Thank you.

  In your ad I didn t understand what happen when you use your Tecra on battery power only. When the portable computer is running and Windows is fully loaded what happens when you unplug the AC power supply?

  Can you start laptop with battery only?

• Tecra M4 - battery problem

  Hello

  My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

  Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

  Thank you

  David

  Hello

  This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

  Good bye

• Lenovo Vibe X 2 battery issue

  Dear team, I brought my Lenovo Vibe X 2 before a month. The phone is seen battery issue, he is stuck at a certain level of load and then it does not show the status of drainage. After some time, it displays the message 'Sim Card' unplugged and have turned off. When I put the charger, it will show the '0' of the battery level. Please guide me if the battery needs to be calibrated, also guide me how to calibrate the battery if needed. I saw a user who has the same problem with the same phone, the community replaced his phone soon. If my phone had to be replaced? Please help and guide as soon as possible. Thanks and regards, Mitesh. XXXXXXXX

  Moderator Note: phone removed for the protection of the Member.

  Hi Mitesh,

  Try to clear the phone to 0 and then keep it off. Then plug the AC to load 100 and start the phone. Lets see if this helps to calibrate the battery. If the problem persists then try to run a factory reset. Check also if there is no OTA update.

• HP ENVY M6-1125DX: HP Laptop Battery issue.

  Hi HP, I found out recently just a matter of my laptop, specifically BATTERY issue. It's my problem, my battery is displayed this text: "53% available, connected and do not load ' . I did some research and I found a few methods I thought it might be useful as: disconnect the battery, calibrate the battery, everything I could find on the internet... but unfortunately it did not work. And for that I would run diagnostic system these are what I received:

  When I unplugged the battery with the AC adapter / CC always plugged in and turn on, my work laptop just to find so I can ensure that my adapter still functional. And yet one thing, have my spare battery with 53%, when I unplugged the AC adapter and have my battery reconnected and try to turn on my laptop computer and comments that: "my laptop has not turn on" eventhough my battery still have 53% available. So my question is: is my laptop dead battery? What I need to replace my battery? If this is not the case for my battery so how can I solve this problem? Is my dough spare parts number: 671731-001, can you show me which site to buy OEM battery? Please help me!  Thanks HP!

  Hello
  
  You can see if it is available in the shop part of HP in your country or through retailers online via eBay, Amazon:
  http://PartSurfer.HP.com
  
  I came to find this one: http://m.ebay.com/itm/Genuine-Battery-HP-DV6-7099-671567-421-671567-831-671731-001-TPN-W108-TPN-W109-/251075663697
  
  Check the credibility of the seller, authenticity of the part and warranty details before buying.
  
  Concerning
  
  Visruth

• Error Code 5 on Inspiron 1501 Windows 7 Home Premium 64 bit WinPhlash more battery issue

  Hi all...

  I installed a FRESH install of Windows 7 Home Premium 64-bit on an Inspiron 1501 w / an AMD Turion64 Processor...

  I know that I have will have limited support of drivers (I think I have this issued... problem) but my current bios is 1.4.0 and I try to install the newest bios...

  When I run WinPhlash it starts... but then, I get the error:

  Cannot load the C:\Users\Inspiron1501\Downloads\drivers driver

  a16 downloads\2.6.3 bios\PHLASHNT. SYS

  Please check your accounts, if you have no administrator privileges,

  Please log in again!

  Access is denied.

  Error code: 5

  I have only ONE user on the laptop... and admin priv!

  Also... I'm having a battery issue... I was wondering if I missed a previous agreement on this issue...

  When I start the system... it shows my battery as being 0% and fill... but when I eject battery and reinstall, it shows then the battery is @ full load, and the battery holds its charge!

  THANK YOU ALL! ANY help would be great!

  JUST an info... It WAS a matter of having the 64-bit o/s installed...

  I installed the 32-bit system and managed to update bios!

  BUT the NEW bios do NOT take the battery problem! It is a separate issue, so I'll look elsewhere.

• Tecra R850, battery "plugged in, not charging".

  Hello
  I'd appreciate some thoughts on the problem.

  The problem:
  The battery is not charged. The icon in the status bar indicates that the battery is "connected" but that it is 'not charging' and 'remember to change your battery.
  Something similar to:
  https://BD23.HTTPS.CDN.SoftLayer.NET/80BD23/142.4.51.106/images/consider-replacing-your-battery.PNG
  In addition, the battery charge indicator is off

  What happened:
  I was using the computer on battery power. During use, the message appeared that the battery is critical 3% and computer suddenly stop (or went to sleep/hibernate). It is possible that the battery was empty, since I was not charged for 2 days. Which was weird, is that I do not have the message that the battery is at 7%, which is normal warning that I get.
  The next day, I plugged the computer power cord started. At the start, computer called I want to boot into 'Safe Mode' or 'Normal '. I selected 'Normal '.
  Then I noticed the problem described above.

  History:
  Nothing in particular. Notebook is less than 2 years old. Battery was at six, now has dropped to about 4 hours, but had no previous problems. No power surge, does not drop the computer, etc...

  Comments:
  -L' computer works without battery, only on the power cable.
  -L' computer does not react if I put only the battery, without the cable, even if it is said that the battery has 9 percent. (he says there are 3% before the initial stop, however)
  -When I plug in the power cable, the battery charge indicator is on for 2-3 seconds (in orange) and then is off. This happens whenever I take the cable out, then in.
  -What is strange, is that every time when I disable networks wireless/mobile using "Flash Cards" and restart the computer, they are 'on '. Previously, this situation will only occur when the computer crashed, or I made him stop (holding the power button)
  -J' tried what was suggested on the forums of Toshiba:

  * 1
  §Remove cable power, battery, clean contacts, put everything back in place
  §Leave to load a few hours
  -> Indicator battery charge was not on a few hours after the

  * 2
  §Remove battery, start the computer
  §Go to the "Device Manager".
  §Uninstall method to control compatible ACPI Microsoft battery
  Computer §restart
  § ACPI Microsoft settle again
  Computer §shutdown
  §Put battery, start the computer
  -> No change, still do not charge, indicator is not lit

  * 3
  Also have interpreted 'Factory reset '.
  §Apres recovery and restart, there is no change
  §Cela time, when I turn off the networks wireless/mobile using 'Flash Cards', they remain "off" even when I reboot a computer, which was not the case prior to 'Factory reset '.
  §However, if I take the feeder and then place it in (while the computer is turned off) and then start the computer, wireless/mobile networks are once again 'on '.

  Any thoughts?

  Thank you
  Miodrag

  On the picture, information is displayed: consider replacing your battery. This means that the battery is defective somehow.

  I guess you need the battery help, another tested good original.

  I don t Jules Destrooper that there is some sort of problem since you've already tried the factory reset recovery software and computer laptop. Problems of software, this procedure should resolve any software related issues. But it was not.

• Tecra A11 - Battery Health Monitor - Message: unknown

  Hello

  PC for my TECRA A11 - 12F battery health monitor (2 weeks) shows an unknown messageheatlh.
  If anyone else has had a similar problem and has it been resolved?

  What happens when you start laptop without battery and when the OS is battery charge will be added also? Battery is correctly recognized?
  In any case, the update of the BIOS is good solution.

  If you are not sure that you you need or how to update BIOS let us know.

• Tecra A3 battery life

  Product specifications for tecra a3 in this website indicates 3.46 hours-mobile brand. I get less than that, although enough to watch a movie. Can I know what this sheet is based-maybe a battery high capacity and the battery supplied with the camera?

  Hello

  the battery life depends on how much power setting you use in battery mode. 3.46 hours can be achieved only at the lowest setting. Another thing is that not all batteries of the same type same time (normally only slight differences). And after a while in use, the battery life will decrease until eventually it stops working (in some years).

  But maybe your battery is not working properly just and must be replaced.

  Good bye

• Replacement Li-ion PA3356U-3BRS for Tecra M5 battery

  * I have a Toshiba Tecra M5 bought 3 years ago. Now, its battery (mentioned on the subject) has a lifetime of about 15 minutes. So I contacted the representative of Toshiba to buy a new. She mentioned that there is no batteries, only the batteries that have been "fixed" by Toshiba with a warranty of 3 months (and a price to pay taxes of 90 euros + 20%). Does make sense? Should I buy one of these or there is a credible alternative?

  Thank you very much for your reply,
  Better subject.
  Naim hedge
  Portugal
  The European Union *.

  Put this number in Google and you'll find enough online shops where you can order the new battery for you.
  Do not buy from Toshiba directly.

  Follow batteries for Tecra M5 you can order:
  PA3356U-3BAS/BRS
  PA3509U-1BAM/BRM
  PA3357U-3BAL/BRL
  PA3129U-3BAS/BRS

  Good bye

• Tecra S2: battery start to empty itself

  A week ago, I got my Tecra S2 by the service. They replaced my graphics card and my laptop worked perfect again, for a few days.

  Then all of a sudden the battery started to empty with the AC adapter is plugged in. When it reaches zero, the laptop runs for a few minutes then crashes. After a few hours the charges of the battery and everything returns to normal. This happens a few times now and is completely random.

  I checked if it was the heat, new bios updates, drivers, connection adapter, but nothing seems to help.

  just an off topic question:

  When you say that service to replace your graphics card, you mean they changed all the motherboard because I guess the graphics card is part of the correction of it.

  regarding your problem, it may be a faulty batery.

• Problem installing XP on Tecra 9000 battery

  I just installed Windows XP on my Tecra 9000 and re-installed all the drivers via software Driver Genius Professional 2007. Everything worked fine except the driver of my battery (battery model: PA3084U-1BAS) and the infrared device.

  I can't find the proper drivers. You can provide them for me?

  Thank you very much for the help!

  Louis

  Hello

  Usually the doesn´t need drivers battery. The only 'drivers' that needs to be installed (and which are limited to all the energy components in your system) are Toshiba Powersaver. If it is installed, then the battery stuff would be recognized.

  Please go here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Download and install the powersaver and other tools for your machine if not already done. Computers laptop Toshiba need their own tools to work properly and not just drivers.

  See you soon

• Tecra 8000: battery not charging

  I have a laptop Toshiba Tecra 8000 works excellently on the radio but cannot get a battery charge! I have 2 new batteries, but when I go to power options it says battery not detected. However if you pass the sector off the power the computer will run on battery for a few minutes.

  Is that all I have to do to recharge the battery because it denies services to broadband radio if I can't charge the battery.

  Thank you in anticipation

  Roy Drysdale

  Hello Roy

  As much as I know there is no any kind of parameters for the battery. Everything works automatically and power of electronic power control controls this. Software gets some info from the hardware store.

  If the battery is not recognized by the system, I'm afraid, there is not much to do and the unit must be checked by the service of the laptop.

• TECRA 9100 battery problem

  Similar experiences to mine, please?

  After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

  At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

  Hardware malfunction

  Call your provider of support material

  NMI: channel check / IOCHK

  The system stopped *.

  A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

  Yet once which seems to indicate a battery problem, I guess?

  Has anyone else had a similar experience?

  Post edited by: Gary S Cooper

  Hello

  Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

  On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

  Good bye