6000 MXP Cisco only streaming audio

Similar Questions

• Tandberg / Cisco 6000 MXP Riddle

  All righty then,.

  I get more and more these investigations the latter time.

  A customer has a 6000 MXP and they are curious about the features, options, and software updates. No I have not contacted partner Help Center and TAC asking a simple question. "Can you please tell me what options (multi-site, option high resolution, etc.) and the revision of the software the unit originally shipped with? Well, since the unit is no longer under warranty, or under contract, they cannot open a grace case a license to just me provide this basic information. NOTE that I can go connect to Polycom and pull up the full story of a product by serial number, even if it was sold in 2005 without hassle. Cisco take Note!

  In any case what I need to know, what unit, the latest revision of software can be upgraded. It's a

  TANDBERG CISCO TELEPRESENCE 6000MXP TTC6-08 REV2 CTS-INTP6000-K9 serial number 25 has 05184

  It would have been nice to know what are the options she was allowed with but hell I'll settle on the latest SW version that this thing can be supported. The thing is that if I remember well, that all depends on a license key. That means that I can not update the SW without providing a license key to activate it, Cisco cannot provide because they offer is no longer supported the product and without the license key I can't upgrade the software. Anyone have any ideas?

  To find out what features and license keys the MXP comes with, you can find the serial number of the codec using Cisco Licensing Portal > obtain other Licenses > license TelePresence to return.

  The latest version of the software is F9.3.3, if you are already running F9.x you can update without needing a release key, but if you do not have F8.x or below, will need you a key to unlock.

• Need help - camera not connected in Tandberg 6000 MXP

  Hello

  After connection to the tandberg 6000 mxp codec HD camera, I get message camera not connected.

  There is no speicial cable to this code? and what is the axis of the s-video on the codec that mark as "'primary' cam?

  Thanks in advance

  Shy

  Camera cable aboard MXP is similar, but it does not work with 6000 MXP codecs. I assume that your cable is marked with C3000 (works only with Edsge and 3000 MXP codecs). You need the cable marked with C6000. I don't know the SKU of CISCO for this cable. It may help you reference TANDBERG:

  115420 camera HD t6000s cable, 2 m

  115421 camera HD t6000s cable, 5 m

  I hope this help you!

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• Audio files imported into iTunes shot in Streaming Audio

  I use iTunes to organize the audio files I've created with GarageBand and create my own albums.  iTunes game allowing to synchronize these albums to my four Macs without problems.

  It worked until I signed up for the trial of AppleMusic plus iTunes game.

  Suddenly the iTunes library on three of the four Mac Sync showed a number of my own songs like 'Apple Music Audio File'.

  When I create a smart playlist with the rule:

  • Artist contains Leonie and iCloud status is Apple music

  I find 17 of my own creations that are all of a sudden Apple music.

  

  And after the end of the trial of AppleMusic I couldn't play them any longer. When I tried, I got the prompt to renew the composition of Apple's music.

  turingtest2 helped me to clone a good library for my other four Macs and start over.

  This helped for a month or two, but now more and more my own audio songs are transformed into 'Streaming audio' for a change, is no longer Apple Audio music file with the iCloud status 'pending '.

  

  I use OS X 10.11.5 on every Mac, with the new iTunes.

  Should I try to restore the iTunes Library again on three Macs synchronized from a good copy master?

  EEK. I've seen iTunes decided to process the files on the local network who have been referred by a UNC path as internet stream before today. What I don't understand is how an internet stream is supposed to get loads of iCloud.

  I think back to a well known version of the library is the only way to solve. What do you see as the location on the tab file for one of the audio tracks?

  TT2

• BlackBerry Bluetooth of Q10 streaming audio question

  When my Q10 connects to my deck (shortly after I start the car) the phone connects to the car without problem. I can make calls, receive calls, etc. - works flawlessly... BUT when you use streaming audio, either through BB Media Player or neutrons MP (downlaoded another player to see if that solves the problem) the connection drops suddenly after about 40 to 80 seconds of game very well.

  Only happens 1 in every 2 - 3 times, it happened regularly during the last 2 months, since I have the phone. I use audio streaming via bluetooth minimum 2 x a day... and he abandoned the connection regularly. is going to play the song for a while, then suddenly the connection BT grave (stereo says no device connected). so I restart the phone, and then it connects / plays very well (it solves every time after a reboot). This never happened with my 9900.

  Among the previous updates OS (to Sept 2013) permanently fixed. I forgot to mention!

• How to make a streaming audio and video on BlackBerry.

  Hi all

  Please someone help me.

  I must be a 3rd part java application that can stream audio and video server and can play only audio/video on my phone from BB.

  Please share me your ideas or related links to do the same as soon as POSSIBLE.

  Thanks in advance.

  Thanks Peter.

  It's really useful links

• Tandberg 6000 MXP video call Source missing

  Hello, I have have a 6000 MXP running F9.3.1 and has been for awhile now.  It was recently discovered that the video source of the call is not the camera that we want displayed.  When I checked the list of options, only some of the available entries were actually there.  Video 1, PC, VNC and current are there, but not video 2.

  I want 2 video as source video of my call, and I am quite sure, it has been defined in this way in the past, or have heard about earlier.  I have down graded to F9.3, but has not made a difference.  I confirmed that this source of start-up and snap shot source all have the right options.

  After checking several other systems MXP running F9.3.1, I see that they are also not the same thing.  Is there anything I can do to call video Source using Video 2?

  Darren

  Hmm interesting. The MXP for F9 Administrator's guide at least shows that it is possible to define,

  but I also see that it only supports some sources:

  

  also through the

  xConfiguration CallVideoSource?

  * xConfiguration h CallVideoSource:<0>

  The source presentation or start working for all:

  

  Have you tried what happens if you set the main power source and the source of startup to video2/aux and restart, and make a call.

  Maybe someone else has another idea, if no, and you have a service contract, you might think of filing a

  case of TAC. In any case keep us updated if you find a solution outside this thread.

  Please remember useful frequency responses and identify useful or correct answers.

• What is the best setting for streaming audio DAC output?

  Entire CD to 44.1 k production, other audio files can be defined above, according to the recording.  What streaming audio, for example KCSM jazz, or any other music station?  What is the best setting of the output of this situation?

  Check the flow rate of flow for the station (you can often check online). It is not anywhere near CD or higher.

• Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.

  Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.  How to stop?

  Hello

  1 is there a problem with a particular video or videos?

  2 did you change on your computer before this problem?

  Follow the suggestions and see if it helps.

  Method 1

  a.Press CTRL + ALT + DELETE.

  b.Click start the Task Manager.

  c the process tab.

  d.Click the process of wmplayer.exe.

  e.Click end process and then click on complete the process.

  Method 2

  See the article and see if it helps.

  File Readme for Windows Media Player 11 for Windows XP

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

• I am trying to load a MPEG file into windows Movie Maker 2013 and load only the audio part. What can be done to fix this

  I have MPEG files that I'm editing and when I load in Movie Maker only the audio part load. During loading, I get the following message at the bottom of the screen for the audio to load but when that ends more nother is responsible and the screens indicate only the audio track.

  Hello friend. I know that windows movie maker supports wmv video well, you can convert your videos to wmv mpeg video for a trial, it should work. If you don't know how to convert a video, this video converter will help you a lot.

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• records streaming audio issues

  Can please indicate why the streaming audio on my laptop are of poor quality - with weakness, its thin and hail - any recording software I use? I tried Audacity, Free Hi-Q Recorder and others, and the result is the same (with Audacity, I have "Stereo mix" selected as my source audio, such as recommended). (NB: my old laptop Vaio with Win XP record audio streams perfectly, using the same recording software.) My laptop current is: Sony Vaio VGN-FW45G o/s: Windows Vista Home Premium 64 - bit sound card: Realtek High Definition Audio Driver Version: 6.0.1.5759 Driver Date: 17/12/2008 (Windows support advises it is the best driver available)

  Hi Franklinde Mesa,

  The problem is the absence of card its drivers and updated the same should solve the problem. I suggest you to update the sound card drivers by visiting the official website of Realtek. Download and install the latest drivers for Windows Vista and check if this solves the problem.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  I hope this helps.

• Microsoft Wireless 6000 v3.0 only keyboard bought but software think that I also have a wireless mouse

  I bought a Microsoft Wireless Keyboard 6000 v3.0 only (no mouse) of Office Depot.  After installing it and the software, my mouse started acting (intermittent, little strange things that you say that something is wrong).   Because of my work (graphic design and writing), I use a mouse great Kensington trackball - The Expert K64325 (wired) mouse.   So, I checked the mouse settings in the control panel and found the Microsoft Mouse and keyboard Center who seemed to think I was using a Microsoft wireless mouse with my wireless keyboard.  I've looked everywhere to find a software for just the keyboard, but it seems to be still associated with the wireless mouse.  I had this problem once before and somehow update Microsoft has found a way to install only on the keyboard of the Microsoft Mouse and Keyboard Center part.  Then when I got the new wireless keyboard, the Center has been installed and I could not get it back just the keyboard even once.  I know that the keyboard and mouse are often sold together in one package, but it's a lot of detail with just the keyboard (all I needed).  I tried to get Microsoft Update in order to install just the keyboard section of the control center, but it did not work.  I don't know how to put up-to-date known to install only on the keyboard part of the Center with my old keyboard or how to tell him to do.  I think something has changed with the new keyboard which does not allow the update to see that I'm just using the keyboard and not the mouse wireless.  Any suggestion would be appreciated.  Thank you.

  Hello

  I suggest you to uninstall Microsoft keyboard utility that is mouse and keyboard Center 2.2 and IntelliPoint 8.2 for Windows 7.  Refer to the article to do so.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-in/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Now, to install applications from the Microsoft Web site and check.

  http://www.Microsoft.com/hardware/en-us/d/wireless-keyboard-6000v3.0

  Let us know the status of the issue. We would be happy to help you.

• Unable to save the Streaming Audio / Creative xfi extreme audio/windows 7

  Creative xfi extreme audio and Windows 7.

  I tried everything and can not record audio streaming. tried to use hearing, audacity and in the audio recording window.
  Drivers day and are tired of all the configurations.
  A post I read online said that Creative didn't activate this option.
  Any suggestions or hacks that you can think...
  Scott

  You can save "what you hear" XP for sure.

  If you do not have this option in the Blender of W7 so you are right, its been disabled.

  However, there is a work around.

  You must create a virtual audio device on your PC. Google for "streaming audio" and you will find some solution, some software are free, others pay.

  Once you have chosen and installed the software, then use the virtual audio device to play the streaming audio and record its 'exit' in your Xfi.

  It is a different and more complicated using two sound devices - your audio device shipped along with your Xfi. Their implementation is not easy, but basically if you got theml work, you will need to connect a cable from the line from one to the line in the other. However, I do not recommend this at all. The software is much more simple.

  See you soon,.

  Jerry