6008 USB running random resets

Similar Questions

• External drive USB disconnects randomly

  Hello

  I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

  The Mac mini is always on and I use the disks USB as server provided the network disks.

  I have Seagate Enterprise drives in the world.

  I get the following output in the Console:

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

  22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

  22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

  22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

  22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

  22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

  22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

  What is going on?

  HARD drive fault?

  Not pregnant?

  Damn Mac mini?

  I thank very you much in advance!

  He could be sleeping?

  Could it be overheating?

  Have you tried swapping the cables yet?

• Design practice nor 6008 USB DAQ

  Hello

  I have a few question, I'd like to introduce. I need some sort of indication on how to better perform a timed cycle of acquisition driven by WSF.
  I'll send my VI (conceptual, not one currently working one) and ask for explanations.
  The goal

  I need to acquire a battery voltage. Load current consumption is driven by a couple of transistor.  I drive the hollow transistors two digital i/o for USB data acquisition.

  Because I need to have a power for a given time cycle, I need to have some sort of time control on the output.
  So I wrote a simple state machine whose States are updated when a timer reaches zero. Each State has its own queue time.
  Moreover, I differentiate between acquisition and control operations using two all in cycles.
  First question: is this a correct way to a timed WSF of construction?

  and now:

  The problem (s):

  I need to connect and establish a correlation between the input line for the internal of the fsm States. So I madesome digital indicator on the face before of the VI and created a local variable (I know that local variables are BAD, but I had no other idea everything) to pass values for some time to the other.

  I also want to select State sequent of the FMS based on the input value, I get a channel. I can stil use a local variable?

  Are the two related tasks?

  Second question: are local variables, something that I can use for this task?

  Last but not least: I need to filter on the values.
  In this vi I perform a filtering operation and then I get the I use for control of local variables.

  will be this filtering desync the two cycles while? will I run out of control before running the filtering?
  

  The same question is valid for the purposes of registration: the unfiltered data record, I guess is unnecessary. But based on this 'architecture' I know the country reports and the recorded signals are out of sync (as happens in many game data acquired with this vi).
  Is this a problem of logging (perhaps given by different buffers for data acquisition and internal State or something similar) or the whole WSF will be out of sync, then all acquired data is more useful because it is out of sync?

  Any advice would be much appreciated.

  Best regards

  Luca.

  Luca,

  Question 1: This is a reasonable start but need some things to make it a good WSF. There is no waiting or delay in the loop so it will run as fast as possible. U.S.-6008 outputs digital software timed so that the DAQ Assistant can take a long time, but the amount of time is unknown and not necessarily consistent from iteration to iteration. Since the DAQ Assistant Analog Input in the other races of loop to<= 10="" iterations="" per="" second,="" a="" wait="" of="" 100="" ms="" in="" the="" fsm="" loop="" seems="" like="" a="" good="" starting="" point.="" waiting="" 3000="" ms="" is="" not="" a="" good="" idea="" because="" the="" loop="" becomes="" unresponsive="" to="" the="" stop="" button="" for="" long="">

  Do you need to write on the lines on each iteration, even when the data has not changed? Add a write state that is called only when the data changes.

  The DAQ Assistant has a Stop input and an output of Stopped. When you are ready to stop the loop, the stop signal must be wired to these inputs so that the DAQ Assistant can delete tasks. The output of the order can be connected to a Terminal to stop the loop.

  Problem (s):

  It seems that you want to link the two loops.  Local variables are usually a bad way to do it. The best way is to use queues.  A queue can send the current state of the file loop. (More comments later if that's really what you need). Another line can send data, or better, the commands, the loop of the file to the loop.

  I think you want digital output values rather than the State. Especially if you add a State writing as I suggested above, the current state will not always represent the condition of the power of your test.  To make this work with the additional state Boolean matrix must be moved from one iteration to another via a shift register.

  It seems that you have at least two controls to be sent from the loop of the file to the loop. One is the stop command. The other went to the higher power level control.  You should probably have a command to set off power level which can be used if the battery voltage becomes too low and before stopping.  How your program is currently configured, the last level of power will continue as long as the power of the computer is on and the USB-6008 is always plugged. The cessation program does NOT reset the lines.

  When you use anti-parallel to the queues, you must be careful on the definition of wait times and the timed out case management.

  The benefits of the queues are that it is easy to ensure synchronization at the level you need, the data can be stored according to the needs, and there are good examples. It also avoids the possibilities of race conditions, often introduced by local variables.  This program could be based on a variation of the design producer/consumer model.

  Filter questions: any filter introduces a time delay. In your case when you filter 100 samples 10 times per second, it is likely that the filter will do well until the next data set has arrived. The delay of the filter is not affecting your synchronization. The above lines will solve problems.  Since you are looking at time of cycle seconds and the minimum interval on the order of 100 ms, the exact chronology (to tens of milliseconds level) is probably not too important.

  The real question about filtering boils down to this: does the control work better if the signal is filtered?

  - - - - -

  I'd probably all this a little differently. Given the slow speeds and the small amount of data, a simple loop with an improved state machine is all that is needed. Get rid of the DAQ Assistant and learn how to use DAQmx screws.  States could include: Init THE Init, Init File, Idle, read, write, DO, Analyze, filter, adjust the power, wait, Save, close file, DO, AI Shutdown Shutdown, error and exit.  No variables. No indicator fake just to allow the creation of local variables. Very little code outside the structure State case. None of the queues.

  Lynn

• 6008 USB shows the digital signal with nothing plugged

  So I really hope that's not too bad, I guess it is.

  I had problems reading of my digital USB 6008 entry this morning. Everything worked very well last night. Now all digital lines on the device to read a signal if it is has that anything connected to them or not. When I run the DAQ Assistant and test line, it shows a signal to each line. Then I did the joint VI (which should do the same) and it shows a constant signal in each line also. And I have nothing connected to the unit. Should reset somehow, or it is broken? Or am I just missing something?

  nckeeley,

  Look at pages 21 and 22 of the User Guide Ni USB-6008/6009 and specifications.  Digital lines have a traction 4.7 kilohm place resistance to + 5 V.  It will be a line of input opne look (and be) high.

  Lynn

  

• MacBook Pro freeze and crash bringing back running randomly

  I have a macbook mid 2012 pro who started crashing and restarting today. I tried to connect a speaker bluetooth with him and it froze and since I had a random crash with restarts.  I tried to repair desk, repair permissions and that did not help.

  Here are the 2 reports: Etrecheck and Kernel Panic

  EtreCheck version: 2.8 (240)

  Report generated 2016-02-03 01:59:22

  Download EtreCheck from http://etrecheck.com

  Time 01:41

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Click on the link [check files] help with unknown files.

  Problem: Computer restarts

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid-2012)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook Pro - model: MacBookPro9, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 107 - SN = D86048500JEDGDM27

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1440 x 900

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1509) - since startup time: less than an hour

  Disc information: ⓘ

  500 GB SAMSUNG SSD 850 EVO Disk0: (500,11 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  SSD of BT (disk0s2) /: 499,11 (Go 126,24 free)

  HD (disk0s3) [recovery] recovery: 784 MB

  WDC WD7500BPKX-22HPJT0 disk1: (750,16 GB) (rotation)

  EFI (disk1s1) : 210 MB

  Sounds (disk1s2) / Volumes/sounds: 749,30 go-go (263,08 free)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  ~/Library/Safari/extensions/Searchme.safariextz

  ~/Library/Safari/extensions/eBay shopping Assistant.safariextz

  2 adware files found. [Remove]

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. ONEv2Daemon.plist

  /Library/LaunchDaemons/com.usbApogeeDaemon.plist

  / Library/LaunchDaemons/com. SymphonyIOUSBDaemon.plist

  / Library/LaunchDaemons/com. SymphonyDaemon.plist

  ~/Library/LaunchAgents/com.spigot.ApplicationManager.plist

  5 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] at.obdev.nke.LittleSnitch (4352 - SDK 10.8) [Support]

  [no charge] com.apogee.driver.ApogeeUSBONEv2Audio (1.0.0a1 - 10.10 SDK) [Support]

  [no charge] com.apogee.driver.ApogeeUSBSymphonyIOAudio (1.0.0a1 - 10.10 SDK) [Support]

  com.apogeedigital.driver.Symphony64 [no charge] (1.4.24 - 10.9 SDK) [Support]

  com.apogeedigital.driver.Symphony64ThunderBridge [no charge] (1.4.24 - 10.9 SDK) [Support]

  [loading] com.globaldelight.driver.Boom2Device (1.1 - 10.10 SDK) [Support]

  [loading] com.movavi.driver.SoundGrabber (1.6.5 - 10.6 SDK) [Support]

  [no charge] of .rme - audio .driver .RMEFirefaceUSB (2.10 - 10.9 SDK) [Support]

  org.cindori.TrimEnabler [no charge] (1 - 10.10 SDK) [Support]

  / System/Library/Extensions

  [no charge] com.digidesign.fwfamily.driver (9.0f4) [Support]

  [loading] com.digidesign.iokit.DigiDal (9.0f4) [Support]

  [loading] com.nvidia.CUDA (1.1.0) [Support]

  com.paceap.kext.pacesupport.master [no charge] (5.9.1 - 10.6 SDK) [Support]

  [loading] com.uaudio.driver.UAD2System (8.3.0 - 10.6 SDK) [Support]

  /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

  com.paceap.kext.pacesupport.Leopard [no charge] (5.9.1 - 10.4 SDK) [Support]

  [no charge] com.paceap.kext.pacesupport.Panther (5.9.1 - SDK 10 - 1) [Support]

  [loading] com.paceap.kext.pacesupport.snowleopard (5.9.1 - 10.6 SDK) [Support]

  com.paceap.kext.pacesupport.Tiger [no charge] (5.9.1 - 10.4 SDK) [Support]

  Startup items: ⓘ

  DigidesignLoader: Path: / Library/StartupItems/DigidesignLoader

  MobileBrServ: Path: / Library/StartupItems/MobileBrServ

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loading] 152 tasks Apple

  [operation] 60 tasks Apple

  Launch system demons: ⓘ

  [loading] 187 tasks Apple

  [operation] 75 tasks Apple

  Launch officers: ⓘ

  [operation] at.obdev.LittleSnitchUIAgent.plist [Support]

  com [running]. ApogeePopup.plist [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [operation] com.adobe.AdobeCreativeCloud.plist [Support]

  [loading] com.nvidia.CUDASoftwareUpdate.plist [Support]

  [operation] of .rme - audio .RMEfirefaceUSBAgent .plist [Support]

  Launch demons: ⓘ

  [loading]    PACESupport.plist [Support]

  [operation] at.obdev.littlesnitchd.plist [Support]

  com [running]. ONEv2Daemon.plist [Support]

  com [running]. SymphonyDaemon.plist [Support]

  com [running]. SymphonyIOUSBDaemon.plist [Support]

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.bombich.ccchelper.plist [Support]

  [loading] com.charlessoft.pacifist.helper.plist [Support]

  [operation] com.digidesign.fwfamily.heler.plist [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist [Support]

  [loading] com.nvidia.cuda.launcher.plist [Support]

  [operation] com.paceap.eden.licensed.plist [Support]

  [operation] com.usbApogeeDaemon.plist [Support]

  [loading] org.cindori.SenseiTool.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.bittorrent.uTorrent.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  com.spigot.ApplicationManager.plist [failure] [support] [details]

  [loading]    A spot of Apple

  Items in user login: ⓘ

  gfxCardStatus Application (~ / Downloads/gfxCardStatus.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Application Launcher UAD counter hidden (/ Library/Application Support / Universal Audio/UAD meter Launcher.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  EOS Utility Application hidden (~ /.) Trash/Canon Utilities/EOS Utility/EOS Utility.app)

  Other applications: ⓘ

  [operation] com.adobe.acc.AdobeDesktopService.60240.7643F934-BEC8-4176-8064-18BFF68B34AB

  [ongoing] com.Adobe.accmac.59388

  [operation] com.apple.xpc.launchd.oneshot.0x10000002.Little Snitch Network Monitor

  [ongoing] com.codykrieger.gfxCardStatus.129536

  [ongoing] com.etresoft.EtreCheck.166740

  [ongoing] com.google.Chrome.38088

  [ongoing] com.Google.Android.mtpagent.250804

  com.lsreset [loading]

  com.trendmicro.ATLoginItemHelper [loading]

  [ongoing] com.trendmicro.DrCleaner.1736

  [ongoing] com.uaudio.uad_meter.149700

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: Version: 15.010.20056 - SDK 10.8 [Support]

  AdobePDFViewer: Version: 15.010.20056 - SDK 10.8 [Support]

  QuickTime Plugin: Version: 7.7.3

  AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Support]

  Default browser: Version: 600 - SDK 10.10

  Safari extensions: ⓘ

  eBay trading Assistant Adware! [Remove] 

  Searchme Adware! [Remove] 

  Audio Plug-ins: ⓘ

  Digidesign CoreAudio: Version: 9.0 [Support]

  3rd party preference panes: ⓘ

  Preferences CUDA [Support]

  YAMAHA-USBMIDIPatch [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  8% Google Chrome Helper (4)

  6% Google Chrome

  5% WindowServer

  3% creative cloud

  2% fontd

  Top of page process of memory: ⓘ

  921 MB kernel_task

  426 MB Google Chrome Helper (4)

  180 MB ocspd

  Chrome Google 164 MB

  131 MB Adobe CEF Helper (3)

  Virtual memory information: ⓘ

  11.00 GB of free RAM

  4.58 used GB RAM (1.64 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  3 February 2016, 01:58:39 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015839_[redacted] .crash

  / Users/USER/Library/Application Support/tap/ApplicationManager

  3 February 2016, 01:58:28 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015828_[redacted] .crash

  3 February 2016, 01:58:18 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015818_[redacted] .crash

  3 February 2016, 01:58:08 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015808_[redacted] .crash

  3 February 2016, 01:57:57 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015757_[redacted] .crash

  3 February 2016, 01:57:47 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015747_[redacted] .crash

  3 February 2016, 01:57:37 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015737_[redacted] .crash

  3 February 2016, 01:57:26 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015726_[redacted] .crash

  3 February 2016, 01:57:16 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015716_[redacted] .crash

  3 February 2016, 01:57:06 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015706_[redacted] .crash

  3 February 2016, 01:56:55 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015655_[redacted] .crash

  3 February 2016, 01:56:45 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015645_[redacted] .crash

  3 February 2016, 01:56:34 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015634_[redacted] .crash

  3 February 2016, 01:56:24 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015624_[redacted] .crash

  3 February 2016, 01:56:14 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015614_[redacted] .crash

  3 February 2016, 01:56:04 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015604_[redacted] .crash

  3 February 2016, 01:55:53 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015553_[redacted] .crash

  3 February 2016, 01:55:43 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015543_[redacted] .crash

  3 February 2016, 01:55:33 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015533_[redacted] .crash

  3 February 2016, 01:55:22 ~/Library/Logs/DiagnosticReports/ApplicationManager_2016-02-03-015522_[redacted] .crash

  3 February 2016, 01:52:32 self-test - spent

  3 February 2016, 01:40:02 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-02-03-014002_[redacted].crash

  com.etresoft.EtreCheck - /Users/USER/Downloads/EtreCheck.app/Contents/MacOS/EtreCheck

  3 February 2016, 01:27:46 /Library/Logs/DiagnosticReports/Kernel_2016-02-03-012746_[redacted].panic [details]

  3 February 2016, 01:25:59 /Library/Logs/DiagnosticReports/Kernel_2016-02-03-012559_[redacted].panic [details]

  2 February 2016, 19:30:37 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-193037_ .crash [deleted]

  com Steinberg.cubase8 - / Applications/Cubase 8.app/Contents/MacOS/Cubase 8

  2 February 2016, 18:50:49 ~/Library/Logs/DiagnosticReports/AdobeCrashDaemon_2016-02-02-185049_[redacted]. Crash

  / Applications/utilities/Adobe Creative Cloud / * / Core Sync.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCrash Daemon.app/Contents/MacOS/AdobeCrashDaemon

  2 February 2016, 06:44:36 PM/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-184436_ .hang [deleted]

  2 February 2016, 06:43:39 PM/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-184339_ .hang [deleted]

  2 February 2016, 06:39:23 PM/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-183923_ .hang [deleted]

  2 February 2016, 18:28:43 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-182843_ .crash [deleted]

  2 February 2016, 18:27:46 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-182746_ .crash [deleted]

  2 February 2016, 12:49:21 AM ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-004921_ .crash [deleted]

  2 February 2016, 12:09:50 AM ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-02-000950_ .crash [deleted]

  February 1, 2016, 19:35:31 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-01-193531_ .crash [deleted]

  February 1, 2016, 18:36:34 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-01-183634_ .crash [deleted]

  February 1, 2016, 05:47:10 PM/Library/Logs/DiagnosticReports/Cubase 8_2016-02-01-174710_ .hang [deleted]

  1 February 2016 05:00:28 PM/Library/Logs/DiagnosticReports/Adobe first Pro CC 2015_2016-02-01-170028_ .hang [deleted]

  / Applications/Adobe Premiere Pro 2015/Adobe Premiere Pro 2015.app/Contents/MacOS/Adobe first Pro 2015 CC CC CC

  February 1, 2016, 05:29:30 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-01-052930_ .crash [deleted]

  February 1, 2016, 05:27:48 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-02-01-052748_ .crash [deleted]

  January 31, 2016, 21:16:14 ~/Library/Logs/DiagnosticReports/Cubase 8_2016-01-31-211614_ .crash [deleted]

  January 25, 2016, 18:03:04 /Library/Logs/DiagnosticReports/Kernel_2016-01-25-180304_[redacted].panic [details]

  January 5, 2016, 02:02:39 /Library/Logs/DiagnosticReports/Kernel_2016-01-05-020239_[redacted].panic [details]

  ---------------

  Kernal panic report

  
  

  Anonymous UUID: 20A93797-6272-0302-2729-78344E08EAF7

  Sea 3 01:27:46 Feb 2016

  Panic report *.

  panic (cpu 0 0xffffff8024a177ea appellant): "Double fault 0xffffff8024a33914, registers: \n" "CR0: 0x000000008001003b, CR2: 0xffffff81e34a4ff8, CR3: 0x0000000027ff0000, CR4: 0x00000000001626e0\n" "RAX: 0 x 0000000000000008, RBX: 0xffffff81e34a5230, RCX: 0xffffff804357ea78, RDX: 0xffffff8024a33ad0\n" "RSP: 0xffffff81e34a5000, PBR: 0xffffff81e34a5200, IHR: 0xffffff81e34a5210, RDI: 0xffffff81e34a5230\n" "R8: 0 x 0000000000000007, R9: 0xffffff804357ea78, R10: 0 x 0000000000000007, R11: 0x0000000000000000\n ' ' R12: 0xffffff81e34a5220, R13: 0xffffff8203593e50, R14: 0xffffff81e34a5210, R15: 0xffffff81e34a5230\n" "RFL: 0 x 0000000000010046, RIP: 0xffffff8024a33914, CS» ': 0 x 0000000000000008, SS: 0x0000000000000010\n "" error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.50.1/osfmk/i386/trap_native.c:1 68.

  Backtrace (CPU 0), frame: return address

  0xffffff81e34b4cf0: 0xffffff802492ad21

  0xffffff81e34b4d70: 0xffffff8024a177ea

  0xffffff81e34b4ed0: 0xffffff8024a3456f

  0xffffff81e34a5200: 0xffffff8024a33ca3

  0xffffff81e34a5220: 0xffffff8024a16546

  0xffffff81e34a54c0: 0xffffff8024a33ca3

  0xffffff81e34a54e0: 0xffffff8024a16546

  0xffffff81e34a5780: 0xffffff8024a33ca3

  0xffffff81e34a57a0: 0xffffff8024a16546

  0xffffff81e34a5a40: 0xffffff8024a33ca3

  0xffffff81e34a5a60: 0xffffff8024a16546

  0xffffff81e34a5d00: 0xffffff8024a33ca3

  0xffffff81e34a5d20: 0xffffff8024a16546

  0xffffff81e34a5fc0: 0xffffff8024a33ca3

  0xffffff81e34a5fe0: 0xffffff8024a16546

  0xffffff81e34a6280: 0xffffff8024a33ca3

  0xffffff81e34a62a0: 0xffffff8024a16546

  0xffffff81e34a6540: 0xffffff8024a33ca3

  0xffffff81e34a6560: 0xffffff8024a16546

  0xffffff81e34a6800: 0xffffff8024a33ca3

  0xffffff81e34a6820: 0xffffff8024a16546

  0xffffff81e34a6ac0: 0xffffff8024a33ca3

  0xffffff81e34a6ae0: 0xffffff8024a16546

  0xffffff81e34a6d80: 0xffffff8024a33ca3

  0xffffff81e34a6da0: 0xffffff8024a16546

  0xffffff81e34a7040: 0xffffff8024a33ca3

  0xffffff81e34a7060: 0xffffff8024a16546

  0xffffff81e34a7300: 0xffffff8024a33ca3

  0xffffff81e34a7320: 0xffffff8024a16546

  0xffffff81e34a75c0: 0xffffff8024a33ca3

  0xffffff81e34a75e0: 0xffffff8024a16546

  0xffffff81e34a7880: 0xffffff8024a33ca3

  0xffffff81e34a78a0: 0xffffff8024a16546

  0xffffff81e34a7b40: 0xffffff8024a33ca3

  0xffffff81e34a7b60: 0xffffff8024a16546

  0xffffff81e34a7e00: 0xffffff8024a33ca3

  0xffffff81e34a7e20: 0xffffff8024a16546

  0xffffff81e34a80c0: 0xffffff8024a33ca3

  0xffffff81e34a80e0: 0xffffff8024a16546

  0xffffff81e34a8380: 0xffffff8024a33ca3

  0xffffff81e34a83a0: 0xffffff8024a16546

  0xffffff81e34a8640: 0xffffff8024a33ca3

  0xffffff81e34a8660: 0xffffff8024a16546

  0xffffff81e34a8900: 0xffffff8024a33ca3

  0xffffff81e34a8920: 0xffffff8024a16546

  0xffffff81e34a8bc0: 0xffffff8024a33ca3

  0xffffff81e34a8be0: 0xffffff8024a16546

  0xffffff81e34a8e80: 0xffffff8024a33ca3

  0xffffff81e34a8ea0: 0xffffff8024a160c8

  0xffffff81e34a8fd0: 0xffffff8024a33e69

  0xffffff8203593f40: 0xffffff8024941deb

  0xffffff8203593f90: 0xffffff8024942330

  0xffffff8203593fb0: 0xffffff8024a116e7

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0 x 0000000024600000

  Text of core base: 0xffffff8024800000

  Text __HIB base: 0xffffff8024700000

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  Availability of the system in nanoseconds: 50822136269

  last load kext to 5216249635: com.nvidia.CUDA 1.1.0 (addr 0xffffff7fa6e2d000 size 12288)

  kexts responsible:

  com.nvidia.CUDA 1.1.0

  com.paceap.kext.pacesupport.snowleopard 5.9.1

  com.movavi.driver.SoundGrabber 1.6.5

  com.globaldelight.driver.Boom2Device 1.1

  com.uaudio.driver.UAD2System 8.3.0

  com.digidesign.iokit.DigiDal 9.0f4

  4352 at.obdev.nke.LittleSnitch

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.ApplePlatformEnabler 2.2.0d4

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyDriver 272.18.3

  com.apple.driver.AppleHDAHardwareConfigDriver 272.18.3

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AudioAUUC 1.70

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.GeForce 10.0.4

  com.apple.driver.AppleIntelHD4000Graphics 10.0.6

  com.apple.driver.AppleHV 1

  com.apple.iokit.IOBluetoothUSBDFU 4.3.6f3

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleSMCLMU 2.0.7d0

  com.apple.driver.AppleIntelFramebufferCapri 10.0.6

  com.apple.nvidia.NVDAStartup 10.0.4

  3.10.25 com.apple.driver.AppleMuxControl

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleLPC 1.7.3

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.driver.AppleUSBTCKeyEventDriver 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.iokit.IOAHCIPassThrough 1.0.3

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleSDXC 1.6.5

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.4

  com.apple.nvidia.driver.NVDAResman 10.0.4

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.driver.AppleSMBusPCI 1.0.12d1

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.iokit.IOAcceleratorFamily2 156.16

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  3.10.25 com.apple.driver.AppleGraphicsControl

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleThunderboltEDMSink 4.0.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

  com.apple.driver.AppleUSBMultitouch 245.2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  I notice that you have several changes to third-party hardware.  There are some third-party RAM installed and a double HARD drive installation.  They should be directed to see if one of them is the cause.

  These are your software possible candidates for your kernel panic:

  

  Remove them and reinstall them individually to find the "problem child".

  NVIDIA, CUDA is the prime suspect in my opinion.

  Ciao.

• Questions about SD and USB running Vista on Satellite M40X

  Well, I've updated my M40X to VISTA, if it is not mentioned on the list of allow.
  Well, actually installed on a new formatted partition.
  Runs smoothly, RAM is sufficient, component more slow seems to be the CPU, well, fair enough.

  Obviously, I'm not able to get the card reader (chip SD card combo, xD,) or the USB ports running.
  The two is listed in Device Manager, the USB hub and the customer of the sd. In addition, there are a storage device mass with a pilot error in the list.
  Whenever I have insert well tested cards, USB HDs mp3 players or that it is in the slots the computer sometimes makes noise-ping but does not show any device in Solution Explorer or a new letter of the device.

  I think it's some kind of driver issue, but found no solution. Not even after researching dayandnight on forums and other things.
  Card reader is "Texas Instruments PCIxx21 Intergrated Flash Media Controller", as I understand it.
  Well, I'd be more than happy and greatfull if someone could recommend a solution for these problems, pref with links to the drivers.
  Am really low.

  TIA

  Jan

  Hello

  As you know, this laptop model is certainly not support Vista and Toshiba will design all the Vista drivers for this model of laptop. I can imagine that Vista works very well, but without the right drivers, it is not easy to use certain hardware components.

  I recommend you to use Windows XP Home edition. WXP works great on this laptop. For all tests, you can install Vista on the second partition to see how it works. I think right after a few weeks remove you Vista and use WXP as before. ;)

• USB-6008, USB-6501 and Embarcadero C++

  Hello NEITHER and NOR users,.

  I spent a considerable amount of money several years ago on a number of devices USB-6008 and USB-6501 for a class that I teach on interfacing the simulations with realworld sensors and actuators.  Write us code using Embarcadero C ++ Builder and we wrote the code to interface with the jury of EZIO AD / DA via RS - 232.  The EZIO is much too slow and limited.  Given advertising NOR, we bought these boards, but after several attempts to get some information OR on the way to talk to these devices directly via C++, we have yet no valid response.  No, I don't want to LabView or any additional expenses.  I just want to talk to them directly.

  OR: are you ready to help with this, or not?  If this is not the case, although wanting to refund these purchases.  Announce as being accessible from C++, but you are not willing to provide any help of substance to this day...

  Yes, I am self-taught, write code, and old-school enough to feel that I have a right to know how to talk to all the devices I buy.  I confess my ignorance, but I'm sick and tired of secret corporate and misleading advertising.

  Can someone please provide me with enough example of code to start.  That's what we wrote for the EZIO:

  http://www.Duke.edu/Web/ISIS/Gessler/Borland/RealWorld-Ezio.htm

  We would like to start writing similar code for these materials of NEITHER.  If possible, we can buy more.  If this is not the case, these cards are useless.

  Kind regards

  Nick

  Nicholas Gessler, PhD.

  Nick,

  When you have installed the DAQmx drivers to communicate with the 6008 and 6501, I assume you also installed programming examples? It is here that they are on my XP machine: C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C.  I don't think that Embarcadero C++ Builder is one of the languages supported, so you'll need to twist your compiler, but it should give you a good start.

  Tom

• graphics randomly reset

  I'm having two issues that may or may not be related. My graphics card keeps resetting itself. Sometimes, it works and I can continue working.other times I get a screen full of vertical lines and have to reboot. The computer also will not combat or race to the power of the battery. If it is and I unplug the power adapter AC it is closed. Any ideas on how to fix my dv7 problems want? It's the windows 8 that I am running after doing a full restore yesterday in the hope that if would solve the problem. If didn't.

  CAREB,

  Thanks for getting back to me. In all honesty, it seems that the material starts to go.

  However, my last suggestion is to reinstall the operating system. This is because their may be a software or a virus causing the problems you describe. It's a long shot, but since you will need to backup everything in any case, you can do it as well.

  First of all, please make sure that you back up your files. Here is information on how to proceed: backup of files (Windows 8)

  Once this is done, it is safe to reinstall the operating system. Performing a recovery of HP (Windows 8) system

  If the same situation occurs, the risk computer has a faulty hardware. At this time, please contact HP telephone support or bring to a repairer to evaluate.

  If you enjoy the information provided, please mark my posts with congratulations and "accept as Solution! It would be useful to me and someone else help to find this information in the future.

  I'll look forward to your response!

  Mario

• 6008 USB differential measure of floating resistance source &amp; bias

  Hello

  For some time now, I have been measuring the sources of floating signals such as transducers of linear speed (LVT) in differential mode by plugging directly into the differential inputs.  The sensors have an impedance source of usually 1 k or less.  I read recently that if you want to measure a floating source in differential mode, you must use polarization resistors, as recommended in a field here Guide.  But I understand that the resistors are only to prevent entry of bias currents pushing beyond common-mode signals.  The recommended values are 10-100 k.  However, the 6008 already has 140 k input impedance, so I figure it's "close enough".  I have not noticed any problems with the signals that I measured, at least in the sense where it oscillates back and forth between 0V and out don't max.  What other kind of errors I would see in my signals?

  So in this case the polarization resistors are really necessary?

  Due to the input on the box USB-6008 circuits, it is unnecessary to use polarization that are required, resistors ofter on other devices with impedances of entry much higher.  The picture below comes from page 16 of the document specification and User Guide.

  Lynn

  

• USB runs now buzzing noise

  Presario S5100NX

  Hello, believe that I caused a short circuit and now there is a noise of snoring/snoring coming from inside the pc.  Accidentally hit the side micro usb cable to the usb hub, computer shutdown / crashed? and when I turned it on, the buzz began and monitor shows the Compaq screen with a configuration F1 and F10 system recovery options.  The two option fail. Switch keyboards and F1 & F10 always inadmissible.

  The noise comes from a little black cylinder, with AC - 1205G and add the sign inside a circle on his back.  It is located right next to the port which connects the power button and led lights to the Board of Directors.

  Need to know if there is a reset or fuse.  Is the Council possible burnt or bad?  Can I repair or should I bring to a service center?

  Help.

  The AC - 1205G Unit is a magnetic buzzer.  Given that your venerable old PC (10 years) gave you many years of great use, it seems a good time to replace. There is no fuse or reset on the motherboard.

  It is highly unlikely that you will be able to find a replacement motherboard as they are no longer manufactured. The current value of the (PC< $50.00),="" even="" in="" good="" working="" condition,=""  is="" actually="" not="" enough="" to="" warrant="" investing="" any="" funds=""  to="" have="" any="" work="" done="" on="">

  Best regards

  ERICO

• Windows 7 64-bit USB mouse randomly freezing

  Hello

  My Microsoft Wireless Natural Ergonomic Keyboard and Mouse 7000 freeze randomly.

  OS: Windows 7 64-bit

  Drivers: Latest IntelliPoint IntelliType

  Latest drivers for p6x58D premium mobo and all Intel chipset drivers USB installed. All the drivers are up to date.

  Several other posters here have the same problem. Their solutions have ranged from:

  (1) disable USB (tried without success) power management

  (2) updated drivers (fact) (fact) windows update

  (3) use the usb mouse not (not an option)

  (4) time of DPC latency (not verified, no problems)

  Uninstalling drivers USB Root Hub 5), reboot to reinstall (does not work)

  The only thing I have left to suspect, is that I had to plug the mouse/keyboard before installing intellipoint/intellitype for the first time. As I built the system from scratch and have no other key/mouse, I need something to click/press to do the installation of windows and intellipoint/intellitype. Yes, the instructions on the set of microsoft to install software first of all that's probably the source of the problem? Should I track down a PS/2 mouse, reinstall all the drivers for mouse/USB?

  Any other suggestions?

  Hey Chris,

  I found the source of my problem. As others have suggested, wireless interference are the problem. :(

  However, before the test of this theory, I removed all the neighbours of the wireless devices, (not a microwave nearby) and moved the mouse right next to the receiver which was attached to my desktop, but it has not solved the problem. This leads me to believe that the issue is not reached. After all, if the mouse is 3 inches of the receiver and still problems...

  However, after reading around online, I found a place that mentioned that large metal objects can interfere with signal as well. Then it dawned on me that my entire computer chassis was made of steel. It is not a plastic case, rather a metal.

  I purchased a USB extension cable and kept the receiver for the mouse wireless of the case, and all the Frost took to occur! :)

  Thanks for all your help, Chris, Debra and Curry!

• 6008 USB channel power for specific times

  Hello

  I am new to Labview, so I don't know if it's easy or hard to do.

  I have an attached VI who writes exits Digital 12-channel.

  What I´d wants to be able to write each channel for a specified time (avoiding the is fine - it doesn´t have to be super accurate, but he needs to turn off automatically after a certain time).

  For example:

  When I click, channel 1, I want him to be for 1 second, then turn automatically cut and wait for the next command.

  When I click, channel 2, I want it turn on for 0.5 seconds, before turning automatically turn off and wait for the next command.

  When I click, channel 3, I want him to be for 5 seconds, then turn automatically cut and wait for the next command.

  etc.

  So when I click Run, I could click on channel 1, wait a few seconds, channel 1 still once, wait a minute, then channel 3, wait 10 minutes, then channel 2, etc, in any order.

  Is how easy it to do? Is this possible?

  Thanks in advance for any advice.

  Jon

  Hi Jon,

  If you want to set the time separately, my guess is it would be easier for you to create the channels separately. It's more manual work, but I think it's better to come up with an algorithm of time-supervision to all channels at once.

  To trigger the output, I think that it is better to share entries, then perhaps it would be good to get out them of the matrix as well.

  In a loop, you can check the value of the button and then just write 1 to the port, wait for the timeout with time delay vi, then wrtie 0 again.

  If you create tasks separately and do not merge error, the process for each channel will work in parallel, so a delay will not affect the actions of the other channel.

  Kind regards

  Mariana.

  

• Z330 randomly resets / accidents

  So my phone restarts randomly. Sometimes during calls sometimes when using the app or just lying on my desk doing nothing. It's only 2 weeks. This would be a case for a replacement unit or is it a software error?

  Thanks for the reply.

  I think I found the cause for the accident. I had too many applications open. 8-10 and I think the phone just can't handle more. It did not crash because I force close applications after using it.

• Multi-channel AI program 6008 USB in c#

  I am writing a program in c# to collect data of voltage.

  I want to allow the user to toggle the channels they wish to collect of (up to a maximum of 4), refers to the number of samples and the sampling for each frequency and write the log to a file of PDM. I think Task.AIChannels.CreateVoltageChannel call four times to create the four channels and Task.Timing.ConfigureSampleClock four times to set up the sampling parameters individually.

  Similar threads seem to indicate that a single channel of AI must end sampling before another channel of AI could begin. Is this true? My method would work?

  You right about that, there is only a single clock controlling the task, so there is no possibility of setting the channels at a different pace, and the API would use a final which has been set up.

  A common practice when different high sampling rates are required is to sample the fastest rate required for all channels and then "decimating" data for slower channels, so you can get the number of samples that you expect.

• Random resets on the taskbar and other things.

  Well, then this probably won't to come out very well because I don't really know what I'm talking about you, but I will go ahead in any case. I watched an episode of a television show of my hard drive on the VLC Player and it froze and nothing was happening, there just repeat the same section of the episode on a newer, no matter what I did, I closed the lid of my laptop but it continued so I stop the laptop by holding the power button and when I turned it It came with a black screen and plenty of writing emerged as she has been updated or do something tells 1/3 and all a bunch of numbers, and when he finally turned back on correctly, almost everything was the same except that I used to have my taskbar and window colors purple, and now they are back to normal and I don't know how to change it back , and the only other thing I noticed that changed, it was that now when I tap all open programs in the taskbar, it came not with the small windows as it was, if that makes sense, he said only: name of the window. That's all until I've noticed has changes, and I would like to know what the problem is and how to change it back.
  Thanks :) Just FYI, I have little knowledge of computers and so I tend to google everything.

  Hello

  As the issue took place recently, I suggest you to perform system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-CA/Windows7/products/features/system-restore

  I hope this helps.