6248 and several upstream layer 2 networks

Similar Questions

• Disorders from several VLANS layer 2 layer 3

  Hello

  We have a layer switch 3 PowerConnect 6248 switch with multiple VLANs and active routing and also a layer 2 with a PowerConnect 5324 switch couple VLANS configured.  My goal is to have several VLANs, through level 3 for the layer 2 switch switch and all VLANS communicate between them.

  I followed the steps under the 3 layer + Layer section 2 to the title of this post:

  en.Community.Dell.com/.../19506015

  Unfortunately, it does not work.

  Here is my current set up and what I tried. My configuration is made via the web interface.

  The 6248 has VLAN 1, 64, 110, 150 and some other configured on the switch. The IP address of the 6248 is 192.168.64.1.  I'm trying to get some vlan 150 and 110 for the layer switch 2 for may I have some ports in the service of vlan vlan portion 150 and some 110.

  I have the IP routing (routing > IP > Interface Configuration) for vlan 150 as 192.168.150.1/24 and vlan 110 as 192.168.110.1/24.

  The 5324 is connected to the 6248 via a port (connected to the port 1 of the 5324 and 18 the 6248).  18 on the 6248 port is currently configured as general / Admit All/PVID 150.  Port 1 on the 5324 is currently configured for the same, but with a PVID of the 1.  150 of VLAN is sent without the label of the 6248 switch and vlan 110 is sent labeled.

  5324 switch is configured with an IP 192.168.150.2 and a gateway of 192.168.150.1.  I am able to access the web interface of the switch and connect machines in any port and get on the 192.168.150.0 subnet.  I created a vlan 110 on the 5324 and it the tag on ports 1 and 4, but port 4 will not any traffic to vlan 110. I tried many settings of belonging to port / vlan various which have all resulted in failure.

  I would greatly appreciate help on this.  It seems that such an easy feat, but I just can't understand it.  I have attached some pictures for people to see.

  

  

  

  

  

  

  

  

  

  I had figured it out.  I enabled Double VLAN on the trunk of the 6248 switch port and it works now.

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Catalogues and several PC

  Hello. I am new to CC & confused about catalogues and several PC. My catalog (5.5 GB) resides on the C: drive to my desktop PC, like the installation of Lightroom. My pictures are on an internal hard drive F:. I also have Lightroom installed on my laptop. The two computers are on the same network. What is the recommended method to access the catalogue of my laptop and have all changes reflected on two computers? I have read many articles and posts on this topic, but I'm still confused.

  Hi davida31228700,

  We do not recommend to store the catalog on the network even if you can have images stored on networks.

  If you want to have the same work in the computer, you can have your catalog on a disk external with the images so that you can use same catalog back and foam between the two computers.

  Check the below thread for more information: Re: Sync Lightroom catalogs between two different computers

  Concerning

  Sarika

• CC opacity keyframe on the black and white adjustment layer does not work

  Hello

  I use the first cc under w8.1 pro

  Well, I noticed a strange behavior

  I added a layer of regulation, the black and white effect and several keyframes

  seems that first reads only the first

  for example

  (1) key-> @0 % frame the second keyframe @100 %, the video is all in color, no matter how much of I add keyframes

  (2) the first key @100 second @0 % (opacity) the video is in black and white, again no matter how many I add keyframes, only the first is read

  I tried the black and white effect on video titles, and so on and it works perfectly, it does not work on the layer of regulation

  I tried other effects on the layer of regulation and they work

  is a bug?

  There is a known bug in previous versions?

  Thank you

  I can reproduce the problem on my system, 8.1 or Mac OS 10.10.3 body.

  MtD

• G6-2231dx Pavilion: Pavilion g6-2231dx and Windows 10 lack of network connections

  Then...  Where are the pilots 10 compatible of Windows for the g6-2231dx Pavilion?  I know that this OS was just launched yesterday, but an excerpt from the developer is available for some time now and any reasonable person would expect a company as big as HP now have their stuff ready for this deployment.

  The latest version of the operating system available on the menu drop-down page downloads & drivers of the g6 is Windows 8.1.  While the Realtek PCIe FE ethernet family and drivers Ralink RT3290 WLAN view and proclaim that they are in perfect working order through the Device Manager, or a connection to the local area network or WLAN connection appear when I opened the section "Manage maps" of the network and sharing Center.

  I've tried so far to solve the problem of the measures:

  Searched in vain for the site of HP compatible drivers, or at least an explanation of why it is not all the drivers available for Windows 10 on my device. By-the-way, there are a lot of dead links on your site.  Did the same to sites Web of Realtek and Mediatek without any result.  Googling has not helped much either.

  Downloaded and installed the latest drivers Windows 8.1, after uninstall of each device (as well as the removal of their files in the system directory) of the Device Manager with a reboot between the two attempts, since the HP website as well as websites of card manufacturers.  No results.

  Updated drivers for each devices via Device Manager and manually that it points to the directory where I extracted the drivers. No results.

  Disabled features, that I had to do to solve the problems with adapters flakey on the latest operating system from Windows to save energy.  No results.

  Rolled back drivers through Device Manager.  No results.

  Uninstalled devices again, tried and then install the drivers in compatibility mode. No results.

  Tried to install the Realtek drivers which claimed to be compatible with Windows 10 that I acquired through the Lenovo Web site. No post no installed errors, but network connections still do not come under the list, while continued to report as work awesomely by Device Manager!

  Editing a registry string by a suggestion in another forum support, but for developers of Windows 10 preview who proposed to change the string of 'dela Jacques = 7' where it was previously set at 5, in my situation.  No results.

  The state icon of connection in the system status bar always has a big, big, red X through it, when I left click on the icon, if waiting to see at least a list of available wireless networks, it is completely empty, with the exception of the option to turn on or turn off the airplane mode (Yes, I made sure it's off).

  It is quite frustrating and I know this isn't quite exclusive fault of HP/Realtek/Mediatek and I'm sure Microsoft has a big had to play in a no-so-finished product, but geeze!  Any help out there?

  MInutes after posting here, I found a solution to the problem of another Web site. This solution is relevant to those who have had a VPN software installed on their system during the upgrade of Windows 10. It may be worth a try, even if you don't have a VPN software installed prior to the upgrade. I followed the instructions below and after you remove both registry key and uninstall the DNI_DNE, the network adpaters Protocol (ethernet or wireless) immediately turned on and connected automatically without having to restart the computer.

  If you have unsupported software VPN installed on Windows 8.1 when you upgrade, you may experience this problem.  We are currently working on a fix.  To check if that's causing your problem of networking:

  1. Click the Start button, then click command prompt (Admin).

  2. Type the following command in the window and press ENTER:

  3. netcfg - s n

• This will display a list of network protocols, drivers, and services.  Check if DNI_DNE is listed in the output.  If this is the case, this problem applies to you.

• If DNI_DNE is present in the same command prompt window, type the following commands to solve the problem:

  Reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
  
  netcfg - v u dni_dne

• If you receive the error 0 x 80004002 after execution of this correction, or the registry key has not been removed or the key that should be deleted is slightly different.  Open Regedit and navigate to the key: HKEY_CLASSES_ROOT\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3}.  Delete it if it still exists. If this is not present and you still not received this error, just reply to the post.  We may contact you to help identify the cause of this error.

Slight modification of my original posting. Please remove the ' / going ' from the code as it is does not delete the subkeys, only values. So, if you have dni_dne and tried this fix with an error result, please try this again with the following change in the original post:

reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /f

• Slow APEVIA CYBERPOWER, 4-core, Windows 7 Home premium-slow two start and several popups asking me to change the settings

  I followed all the directions to Norton Support staff, but windows won't let me access the 'C:\Users\Chris>chkdsk.  My machine is slow and several companies have informed me serious problems.  (In the black box) of "Start - Search says chkdsk " access denied because you don't have enough privileges. " You have to invoke this utility running in elevated mode.  I used the system and Defragmenter tools.  The "USER ACCOUNT" of my control panel lists ' Chris as administrator, still will not allow me access!  Neither I nor Tech Norton can understand this one.  CAN ANYONE?

  My problem is that now I'm quite cash and poor credit and I can not find a freeware without scanner is not a costly record for the fix.  Now I wonder if they still exist.  Can someone help an old man handicapped with nothing in his life to do than to play Flight Simulator-X.

  Signed

  Out-Of-Commission-Without-Some-Help.

  I bought a computer from them 4 years ago and my experience was not very good.  I had to replace the motherboard and power supply and while I was there I replaced the RAM sticks because they were not compatible with the jury as well the only thing original is the case, and the microphone on the front panel is not working still I have not tried yet the helmet.

  I don't know what the problem with your machine, but it is possible that it is hardware or software partners. I suggest that you post in the forums there is someone out there can help you out. If your machine is still under warranty I contact them or take it to a reputable repairshop. Just to let you know I was really sick and I couldn't return my machine within a period of one month return policy, and they told me to come any time to get my computer fixed.
  I rode it five times and was always a problem. The only solution was to fix it myself.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  Hi ChadCrowell,

  Remote Desktop connection allows remote control of your Windows XP Professional computer from another computer running Windows XP Professional or an earlier version of Windows.

  Reference: How to use the Windows XP Professional Remote Desktop feature?

  By creating an incoming connection, a computer can act as a remote access server is running Windows XP Professional, Windows 2000 Professional

  Reference: To make an incoming network connection

  Hope the helps of information.

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Microsoft tools for restore the disk framentation system, and several others are missing. Is there a way to recover/reload?

  My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this?  I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?

  <(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">

  Hey, take a look at the article and try the steps

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html

  See you soon!

• Access denied error for some files pdf and jpg transferred via a network home of microsoft (working group)

  I use a home network of microsoft are working on a Linksys router.  Some (not all) files jpg and pdf transferred over the network producing the error access denied when you try to open, change of name, copy, etc.  I am not able to copy files thesse in a Breifcase on the remote computer which I use for backup.

  The original files are in agreement on basic computer; If I archive in a zip file I can decompress and open the files on the remote computer. If I copy on a zip drive and hand to the remote computer, the files are correct.  It might have started because I've upgraded to SP3.  Disable Norton doesn't seem to help.  I downloaded and used LockHunter which shows the files are not locked and does nothing to help them open.

  OS - XP Pro with SP3.  Security - Norton Internet Security - 20010. Adobe Acrobat 7.0 and Adobe Phtoshop 6.0 but to open JPGs with other programs and save back doesn't help.

  Any ideas?  I use the net sneaker now and stood up on the local network.

  Bill

  Well, I found my problem.  After many attempts to unlock files and cureing my registry etc etc. I put the properties on each of the files to enable sharing.  After this Briefcase has worked and I can open the files on the remote control.  I feel stupid: not really!

• With XP Pro SP3 and Win 7 x 64 network connectivity issues

  I have three computers on a home network via the connection to the router. Box 1 running XP Home. Box 2 XP Pro SP3 and the box I use is (my main box 3) running Windows 7 Pro x 64. In Norton 360 all the boxes appear. The Win 7 system does not appear in the local network on the two first machines. The software shows them as being shared and protected. Win 7 shows however all three machines appear in computer (win 7) and will not let me connect and I would like to receive files from the XP Home (box 1) machine. You cannot connect at all to the box to XP Pro from 1 or 3. When I try to connect to my main box 2 box I get this message

  "box2\ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. »

  Any ideas as to why XP Pro box are not accessible? As I said it has all the preferences enabled file sharing. The firewall is not the cause, and the antivirus is not the cause. I have disabled both to exclude it. I can use the utility to transfer files between machines 2 - 3 but that doesn't help me get the kind of access that I owe to my backup drives that are on the machine 2 (xp pro).

  It must be something simple that I forget (I hope)

  Any help is greatly appreciated!

  The problem that is described in the article does not always cause Event ID 2011.   The steps in this article should solve the problem, even without this event ID.

  I'm sorry, but I don't know if removing and reinstalling Norton will fix the problem.  Try it and see!  Test the network after UN-installing and then again after re-installation. Boulder computer Maven
  Most Microsoft Valuable Professional

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems