6248 battery problem? (Included Config)

Hi people,

First of all, I am 100% new to the Dell model of switching. Secondly, I have only with this company a month and have been putting out fires more than any individual in that my age should have!

My last 3 alarm fire, it's that I'm VERY different internet speed tests between two stacked 6248. If I'm connected 2/g29 I get 48Mbps both downwards and upwards, if I'm plugged into 1/g29 however, I get 10Mbps down and .41Mbps upward!

These two switches have the same software (3.2.1.3) anyone can see anything obvious based on the configuration running posted below?

Note: The firewall is connected to 2/g33, and there is no QOS on its interface.

Thank you!

Tom VB

! Current configuration:
! Description of the system "Powerconnect 6248, 3.2.1.3, VxWorks 6.5.
! 3.2.1.3 system software version
! Passage mode is configured as disabled
!
Configure
database of VLAN
VLAN 2-4, 9, 11, 666
VLAN 1 1 routing
VLAN 3 2 routing
VLAN 2 3 routing
VLAN routing 9-4
VLAN routing 4 5
output

"Holland Datacenter" SNMP server location
hostname "H-DC59.
unicast SNTP client enable
172.16.1.103 SNTP server
172.16.1.104 SNTP server
battery
1 2 Member
2 2 Member
output

IP 172.31.1.1 255.255.255.240
access-list no deny ip any one
access-list no deny ip any one
class-map correspondence throttle_80 ipv4
output

Policy-map throttle_web in
output

No transfer of ipv6
no ip redirection
IP routing
IP route 0.0.0.0 0.0.0.0 172.16.1.17
IP route 172.18.0.0 255.255.0.0 172.16.21.10
IP route 172.23.0.0 255.255.0.0 172.16.21.10
IP route 192.168.1.0 255.255.255.0 172.16.21.10
IP route 192.168.5.0 255.255.255.0 172.16.21.10
IP route 192.168.7.0 255.255.255.0 172.16.21.10
dynamicrenew ARP
IP helper 172.16.1.103
IP helper 172.16.1.120
IP helper 172.18.1.5
IP helper-address 172.16.1.40 dhcp
router RIP
no activation
by default metric 1
output

interface vlan 1
Routing
IP 172.16.21.1 255.255.0.0
output

interface vlan 2
name of the 'Wireless '.
Routing
IP 172.25.21.1 255.255.0.0
IP helper-address 172.16.1.103 dhcp
output

interface vlan 3
name of the "Guest".
Routing
the IP 192.168.0.1 255.255.255.0
output

interface vlan 4
name "FTP".
Routing
IP netdirbcast
bandwidth 10000
IP mtu 1500
output

interface vlan 9
name "phones".
Routing
bandwidth 10000
IP mtu 1500
output

interface vlan 11
name 'Internet '.
output

interface vlan 666
name 'Internet '.
output

level of xxxxxxxxxxxxxxxxxxxxxxx username 'admin' password encrypted 15
property intellectual ssh server
No flowcontrol
No spanning tree
spanning tree mst configuration
name "00-19-B9-91-35-4E".
output

management of the access-list "mgmtsec."
enable https service priority 1
allow ssh 2 priority service
enable snmp service 3 priority
allow the priority of http service 4
output

router ospf
no activation
output

!
interface ethernet 1/g1
switchport access vlan 666
output

!
interface ethernet 1/g2
spanning tree cost 200000
costs external spanning tree mst 0 200000
switchport access vlan 666
output

!
interface ethernet 1/g3
switchport access vlan 666
output

!
interface ethernet 1/g5
Auto mode channel-group 10
Description "MIBE.
output

!
interface ethernet 1/g6
Auto mode channel-group 10
Description "MIBE.
output

!
interface ethernet 1/g7
Channel-Group 11 mode on
Description 'MIESX4-MGMT ".
output

!
interface ethernet 1/g8
Channel-Group 12 mode on
Description 'MIESX4-VM.
output

!
interface ethernet 1/g9
Channel-Group 13 mode on
Description 'MIESX5-MGMT ".
output

!
interface ethernet 1/g10
channel-group 14 mode on
Description 'MIESX5-VM.
output

!
interface ethernet 1/g11
channel-group 15 mode on
Description 'MIESX6-MGMT ".
output

!
interface ethernet 1/g12
Channel-Group 16 mode on
Description 'MIESX6-VM.
output

!
interface ethernet 1/g21
negotiating 1000f
output

!
interface ethernet 1/g30
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 1/g31
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 1/g33
channel-group mode 1 on
output

!
interface ethernet 1/g34
channel-group mode 1 on
output

!
interface ethernet 1/g35
Auto mode channel-group 7
output

!
interface ethernet 1/g36
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 1/g37
Auto mode channel-group 4
output

!
interface ethernet 1/g38
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 1/g39
channel-group mode 6 on
output

!
interface ethernet 1/g40
channel-group mode 6 on
output

!
interface ethernet 1/g42
spanning tree cost 20000
costs external spanning tree mst 0-20000
switchport mode general
switchport General disable filtering of capture
output

!
interface ethernet 1/g43
channel-group mode 3 on
output

!
interface ethernet 1/g44
channel-group mode 3 on
output

!
interface ethernet 1/g45
channel-group mode 5 on
Description "ToWLC".
output

!
interface ethernet 1/g46
channel-group mode 8 on
output

!
interface ethernet 1/g48
trading 10: 10f 100 h 100f 1000f
Description "ToClosetL".
switchport mode general
switchport general allowed vlan add 2 666 tag
output

!
interface ethernet 2/g1
channel-group mode 2 on
switchport access vlan 4
output

!
interface ethernet 2/g5
Auto mode channel-group 10
output

!
interface ethernet 2/g6
Auto mode channel-group 10
output

!
interface ethernet 2/g7
Channel-Group 11 mode on
output

!
interface ethernet 2/g8
Channel-Group 12 mode on
output

!
interface ethernet 2/g9
Channel-Group 13 mode on
output

!
interface ethernet 2/g10
channel-group 14 mode on
output

!
interface ethernet g11/2
channel-group 15 mode on
output

!
interface ethernet 2/g12
Channel-Group 16 mode on
output

!
interface ethernet 2/g15
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g16
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g17
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g18
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g23
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g25
Description 'Internet to edge-router'
switchport access vlan 11
output

!
interface ethernet 2/g26
Description "ToTMG".
switchport access vlan 11
output

!
interface ethernet 2/g27
Description "ToPaloAlto".
switchport access vlan 9
output

!
interface ethernet 2/g30
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g32
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g33
channel-group mode 1 on
Description "To_Palo_Alto".
Disable spanning tree
output

!
interface ethernet 2/g34
channel-group mode 1 on
output

!
interface ethernet 2/g35
Auto mode channel-group 7
switchport access vlan 3
output

!
interface ethernet 2/g36
spanning tree cost 200000
costs external spanning tree mst 0 200000
output

!
interface ethernet 2/g37
Auto mode channel-group 4
switchport access vlan 3
output

!
interface ethernet 2/g39
channel-group mode 6 on
output

!
interface ethernet 2/g40
channel-group mode 6 on
output

!
interface ethernet 2/g41
spanning tree cost 20000
costs external spanning tree mst 0-20000
output

!
interface ethernet 2/g43
channel-group mode 3 on
output

!
interface ethernet 2/g44
channel-group mode 3 on
output

!
interface ethernet 2/g45
channel-group mode 5 on
Description "ToWLC".
output

!
interface ethernet 2/g46
Description ' 172-16-16-20'
switchport access vlan 2
output

!
interface ethernet 2/g47
Description "POE_Phones".
switchport access vlan 2
output

!
interface ethernet 2/g48
Description "NewLamination".
switchport mode general
switchport general allowed vlan add 2 666 tag
output

!
interface port-channel 1
spanning tree cost 20000
costs external spanning tree mst 0-20000
switchport mode general
switchport general allowed vlan add 2 tag
output

!
interface port-channel 2
switchport mode general
switchport general allowed vlan add 2.4 tag
output

!
interface port-channel 3
policy - throttle_web
spanning tree cost 10000
spanning tree portfast
spanning tree mst 0 external costs 10000
switchport mode general
switchport General disable filtering of capture
switchport general allowed vlan add 2 666 tag
output

!
interface port-channel 4
switchport mode general
switchport general allowed vlan add 2 tag
output

!
interface port-channel 5
policy - throttle_web
"Cisco-WLC" description
switchport mode general
switchport general allowed vlan add 2-3 666 tag
output

!
interface port-channel 6
switchport mode general
switchport general allowed vlan add 2 tag
output

!
interface port-channel 7
switchport mode general
switchport general allowed vlan add 2 tag
output

!
interface port-channel 8
switchport mode general
switchport general allowed vlan add 2 tag
output

!
interface port-channel 10
Description "MIBE.
output

!
interface port-channel 11
Description 'MIESX4-MGMT ".
output

!
interface port-channel 12
Description 'MIESX4-VM.
output

!
interface port-channel 13
Description 'MIESX-MGMT ".
output

!
interface port-channel 14
Description 'MIESX5-VM.
output

!
interface port-channel 15
Description 'MIESX6-MGMT ".
output

!
interface port-channel 16
Description 'MIESX5-VM.
output

SNMP-server community public ro
output

Update: in the framework to deal with a weird firmware update problem, I went into the web interface and made a hot failover for switch management units (by changing the Type of 'StackMember' to 'Management' unit on one of the two switches) and after you apply the changes, and reconnect, I now get flow of full bandwidth across the network!

Something was apparently wrong in communication between the members of two battery?

In any case, the battery seems to work fine now.

Tags: Dell Switches

Similar Questions

  • TECRA 9100 battery problem

    Similar experiences to mine, please?

    After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

    At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

    Hardware malfunction

    Call your provider of support material

    NMI: channel check / IOCHK

    The system stopped *.

    A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

    Yet once which seems to indicate a battery problem, I guess?

    Has anyone else had a similar experience?

    Post edited by: Gary S Cooper

    Hello

    Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

    On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

    Good bye

  • ThinkPad E220 "Critical battery problem" even AFTER updating firmware of the battery

    Hey,.

    I am owner of a Thinkpad E220 (5380-CTO) and the "Lenovo Thinkpad Toolbox" gives me daily alerts that I have a "critical battery problem". The link takes me to a page to download and update the firmware of the battery. "Updates to the Firmware of battery for hand and slice batteries (external) - ThinkPad Edge E220s, E420s Edge, X 1" http://support.lenovo.com/en_US/detail.page?DocID=HT062049&AID=10429688&PID=3719336&CJURL=http%3A%2F...

    I went through all the steps to update the firmware numberous times, including making the recalibration of the battery and I STILL get the daily 'critical battery error message '. Please help, the daily scans eat up RAM and it's annoying that I have to cancel every day.

    The battery, from what I can tell, works otherwise.

    Thank you!

    Hi all

    Just to give you an update. Our side engineering has tested and managed to reproduce the problem in their labs. They can confirm that by uninstalling the box to Lenovo tools and installation of the currently supported ' Lenovo Solution Center ' as a brand already proposed forum solved the problem.

    The "Lenovo Solution Center" can be downloaded from the link below.

    http://support.Lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73784

    Do give it a shot and let us know.

    Concerning

  • Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

    Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

    Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

  • My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

    My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

    I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

    Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

    If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

  • iPhone 4 s - battery problem

    Hello

    I have an iPhone 4S running iOS 7.1.2 who must break with the battery problem almost entirely.

    I don't know if it's a hardware problem, but I hope that it is a software problem so I will try to do everything as my possible to isolate and software problem.

    I did a reset on iOS, but it does not solve. The next step should involve a DFU reset using iTunes but it will update my iPhone to iOS 9 and as far as I know it will turn my iPhone unusable.

    The other possibility is it back to iOS 6.1.3 but it won't, I must do a restore to iOS 9 which will be a problem.

    Yes, is there something I can do without updating to iOS 9?

    What makes you think this update to iOS 9 will make useless iPhone?

    Please read here > identify your iPhone - Apple Support model

    Read also here > update the iOS on your iPhone, iPad or iPod touch - Apple Support software

    Last read here > get help with hardware on your iPhone, iPad, and iPod features touch - Apple Support

  • Satellite U940 - battery problem

    Hi, my battery LED doesn't turn on when it is plugged. My laptop is plugged in but does not support. AC adapter works fine. Is this a battery problem? Do I have to buy a new battery?

    Is this a battery problem?

    No doubt...

    Do I have to buy a new battery?

    If there is battery failure, the battery should be replaced.
    But if your warranty is valid I recommend asking an ASP in your country for assistance... perhaps it could be replaced in warranty...

  • "Erase content and settings" help battery problems?

    Battery life of my iPhone of 6 has problems. All of a sudden, the battery started to die very quickly. Sometimes my iPhone at 30% and I have to keep it on the charger for most of the day. Will help to "erase all content and settings '?

    If some app is the origin of the battery problem, then the clear operation will help, because it gets rid of all applications.  If its still bad after the operation to clear and without restoring from a backup, then it's a hardware problem.

  • Satellite P300-172 battery problems

    Hello.

    Hope you all had a good Christmas and can hopefully help out me.

    I bought a laptop P300-172 awhile back.
    Now, even after the sinking of a large number of power settings, the battery life was poor.

    So I ordered a replacement from ebay (part 3rd battery) the battery is identical to the Toshiba battery in everyway of course the only difference is there was not an a toshiba.

    in any case, when the battery arrived I plugged it and the battery LED came on to show that he was charging, when I booted up my laptop (with vista) windows showed that there was no battery connected, I thought strange. But I did back and let it load, after an hour or two charging orange led started flashing which it never did.

    Still, I booted up vista and windows showed there is no battery connected. I have contcated the seller and assumes that the battery was faulty, as chance would have, he repaid the article and I went back to the normal toshiba battery.

    I had another battery, ordered through work and that is identical in every way, once again, except that it was another 3rd party battery and which does exactly the same thing.

    Can anyone help?

    I've updated to the latest version of the BIOS (3.9) and have tried many steps as leaving the laptop without the battery for 30 minutes and then insert the battery. update the bios.

    Well that's about all I can think and have read through the forums.

    I appreciate may give any information you guys! Sorry for the long message.

    If I were you I wouldn't assume more battery problems and return the phone to the place of purchase, if you can.

    The problem is out of your control, as you have tried multiple batteries. Just give him place of purchase to watch. Then less grief for you.

    Good luck.

  • Re: Satellite T - battery problems

    My laptop battery will not charge when connected to the power terminal. I also have to remove the battery to turn on the laptop, it turns with the battery connected.

    Can someone give me some advice or do I have to return the battery?

    Hello

    The warranty is valid?
    If so, then get in touch with a local ASP because I m not quite sure if it s only a battery problem.

    Usually if the battery would be affected so you should always be able to turn on the unit.
    I think there could be something wrong that should be checked by an ASP.

    Good luck

  • Satellite Pro A120 battery problem

    Hi all

    I have a portable Satellite Pro A120 and is a battery problem a month ago.
    The battery is not new, but recently changed, 6 months ago.
    Until a few weeks ago, it lasted about 2 hours when full load, until this time
    suddenly dropped 30-40 minutes.
    In addition, sometimes the power of the laptop turns off when it's a few extra vibrations,
    for example, if I put it on a table without the maximum protection.
    In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

    I initially though that there was a problem with the battery or the battery contacts, but they seem ok.
    I tried to unload it in my laboratory of the company with a power resistance: resistance absorbed 1A continuously for more than 3 hours. As the specification 4400mAh battery, I would say that the battery is ok.

    Is it possible that I have a problem with the battery inside the pc management circuit?
    The battery stress test above seems to show that the charging process is ok. So the problem might be with
    the provision of monitor or battery power.
    Someone at - it experience of similar problems and maybe a solution.
    Or perhaps a work around? As excluding the battery monitoring and auto turn off

    Thanks in advance
    Concerning

    > Is it possible I have a problem with the battery inside the pc management circuit?
    Perhaps, but that's just a guess only a cellphone technician may provide an exactly the answer to this question.

    > Furthermore, sometimes the power of the laptop turns off when it's some additional vibration.
    for example, if I put it on a table without the maximum protection.
    In some cases, these, is not possible to turn on the laptop, unless I have remove the battery and put it back in place.

    It is very strange, I want to say if the contacts of the battery and the battery would be ok, this symptom shouldn't its sounds strange for me, so maybe that's the key why battery don't not lasts more than 30-40 min

    However, I think you should try a new battery before checking the motherboard.

  • Satellite A60-108 battery problems

    When I don't have the AC adapter is plugged into the laptop either-

    A. the laptop won't turn on the blue light illuminates to and starts on for about 2 seconds or

    B. If I take the adapter out when laptops on it turns off

    However if I keep the adapter on its totally fine marketing and race, it is a battery problem? ne1 can help?

    Thank you

    Hello

    It seems that the battery is defect. Please contact the partner customer Service in your country and ask them if the battery is covered under warranty. AFAIK it battery is covered for one year. How old is your laptop?

  • 9.2.1 update triggered battery problems?

    I just upgraded to 9.2.1 and now my iPhone battery problems 5 returned.  I replaced the battery about a month ago and it worked fine until the upgrade.  Anyone having battery problems after the upgrade?  I've been in contact with Apple and they say that the battery is fine... but still it drains way of quickly.

    You say that you have replaced the battery... Please provide details. Did you replace yourself, be replaced by Apple, or be replaced by a 3rd party?

  • Yoga Pro 3: battery problem

    Hello

    my 4 month old Yoga Pro 3 just start having some battery problems:

    The State of the battery indicates 0%, even if I've charged for 3 hours. No change. If I unplug the charging cable, it crashes. (Orange light, saying no autonomy here)

    I rebooted, updated to the most recent State and also tried the 30 sec method, proposed in this topic (Klick me).

    Can someone please advise what to do? Is it a hardware problem or software?

    Thank you very much!!

    Danke

    (German response is also possible)

    -Venskira

    Mod comment: since this is an English forum please keep discussion in English.

    Thank you for your reply and help.

    Funny thing is 5 hours after this post, I had the last Win10 update (with design changes.) Annnd suddenly everything works well again.

    But you're right, opening Yoga is no option.
    Thanks again!

  • Lenovo Y40-70 battery problem

    I had a battery problem (the known: battery says 100% and suddenly falls to 0% and close) and in September, I sent my computer to Lenovo. It takes about 6-7 weeks so that the battery needs to be replaced. My guarantee also had to be extended, but was not. Now, my battery has exactly the same problem. I don't want my battery to replace again: it takes too long and I can't wait that long again. Can someone help me please to solve this problem?

    Thank you.

    In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

    Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

    The numbers for Y40-70/80 batteries are:

    Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

    Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

    Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

    To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

    Thank you

Maybe you are looking for