Satellite L750: HDD LED lit almost always - very slow system

Hello!
I have a TOSHIBA * L750 - 13 L * laptop with part #: * PSK30E-00R00EG4 *.
The system was fast, but then one day suddenly it got very very slow. White led disk light remained on and opening the usual document (or even the jpg photo) obtained extremely slow.

When I start windows 7 (64-bit), it works fine for a minute or two and then the hard drive lights all the time (with a minor stops). Opening documents at this point is pretty darn slow.

I have discovered that when in safe mode (with or without networking), it works fine but when I run a normal mode, it is very slow. When I learned that I just did a clean install of Windows 7 64 bit on c: (format and install). Other two partitions d: and e: remained intact. Unfortunately, nothing has changed. When I installed all the drivers of light light HARD drive again and all went to "mode"snail".

I installed avg, amr player 7zip, chrome and image resizer for windows, and all drivers needed in a correct order...

What is a problem? He worked for six months without problem - I have not installed anything new... How to solve this problem? Why didn't - it's not a problem that appears in safe mode?

Unfortunately, on this virtual path is not easy to offer the exact diagnosis but I assume that there is a problem with the HARD drive (bad sectors on HARD drive specific position).

If the same problem occurs with own preinstalled OS, I presume the troublemaker is HDD. If you have the second disk HARD try to exchange it, reinstall the recovery image and test the features.

If the warranty is still valid, I recommend that you contact the nearest Toshiba service provider, explain the problem and ask for help.

Tags: Toshiba

Similar Questions

  • Satellite L30-10T - downgrade after XP is very slow

    Hello

    I downgrade my Satellite L30-10T from Vista to XP Pro SP3 and I installed all the drivers, but I have some problems:

    All control systems are very very slow, is not possible to switch-off order XP, install new programs is slow...

    Thank you

    Hello

    You have yellow exclamation marks in Device Manager?

    On the Toshiba site I founded an installation instructions document. Did you follow this order of installation for all drivers and tools?

    Also please check if Device Manager you have enabled DMA mode for the primary and secondary IDE controller.

  • Satellite T110-11U: WLan connection dropped and very slow performance

    Hi people,

    I use a Satellite T110-11U running windows 7 Home premium.

    After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

    I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

    Any suggestion or tips to try will help save my sanity!

    Thanks for your help.

    John

    > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
    If you need to make sure that you use the latest WLan driver.
    The driver can be downloaded here:
    http://APS2.toshiba-tro.de/WLAN/

    The laptop uses the Realtek RTL8191SE of WLan card.
    Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

  • Satellite C660 with Windows 8.1 is very slow

    I have upgraded from windows 7 to 8.1 and it was very slow, the drive is still in the use of 100.
    When I had Windows 7 I've never had the slow computer.

    An entry is written on your tasks en segundo plano Protección screenshot
    Its tasks in the background Windows protection srtasks.exe
    This process starts automatically and should not cause performance problems.

    However, in case you have problems with this exe file, I recommend checking the system of possible virus and malware.
    Sometimes viruses are very similar to the standard windows processes a likely to affect the performance of the system as well as functionality.

  • Very slow system 11.5.10.2

    Hussein,

    Collect the schema statistics program was expected yesterday and has not finished, so I cancelled it, which will cause to the performance.

    System is running very slow.

    Please advice.

    Thank you
    Prince

    Prince.

    What is your version of the database and operating system?

    What is slow? Forms/reports/DB/Apache... etc?

    Did you recently change?

    You can find errors in the database log file?

    Have you tried to bounce the services (if possible) and see if that helps? You can stop the CM at least for the time being and monitor performance.

    Please also see old similar threads - http://forums.oracle.com/forums/search.jspa?threadID=&q=Performance+AND+Tuning&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

    Thank you
    Hussein

  • Satellite L750: WLan LED is OFF / driver Bluetooth not installable

    Hi, can someone tell if it is known or unknown problem.

    It comes to the status of "Out-of-the-box".

    (1) wireless communication led her to the right is always disabled regardless of the status of the internet connection. As a general rule, connection is not detected on boot-up top, so FN + F8 and "All-on" step is necessary until I get internet connection Wi - Fi.

    (2) in this case, if I try to turn it on Bluetooth (for me to be able to use the Bluetooth mouse), it begins to install the Bluetooth driver but ends at halfway, telling it that "Bluetooth cannot be turned on, turn the knob on the side of the unit" - of course there is no physical button or switch on my laptop for this statement.

    To make things worse, if I try to update the BIOS with the latest version, the file contains a Trojan virus (as of December 3, 2012, 22:00, the New Zealand time), and I was unable to update.

    I've updated the network wireless third party (64-bit) driver, but it does not solve these problems.
    Thank you

    Please can someone help me?

    L750

    Model: PSK2YA-0T102S

    Post edited by: tshskzk

    Hello

    What system do you use? Win 7 or Win 8?
    Using Fn + F8 turn on the WiFi and BT and turns off.
    Using Win 7, you can enable and disable WLan or BT but using 8 win the FN + F8 would disable Wlan and BT at the same time.

    I have no idea what you have the WLan card, but I think that a single module contains a feature WiFi and BT. So if you want to install the BT stack you must install first the filter of Bluetooth (IE if you have the Atheros Wlan card, you need to install the Atheros BT stack BEFORE BT filter).

    Looks like the unit is of the Australia, then I recommend the driver page for all Toshiba drivers to THE

  • T410s HDD LED lighting is always that the charger is in.

    I bought Lenovo T410s in pretty bad shape. I decided to refubish one, because I have a few spare parts of T400s. So I disassembled the laptop, cleaned that and installation rear. Because the LCD is faulty, I changed the LCD set (I put all the T400s), changing only the LCD bezel (but the only difference between the bezzel is model registration on it).

    I have instaled the dos system. After completing the installation of the system with all the updated drivers, I noticed that the LED on the HARD drive in the LCD (one under LCD) Panel is always lighting that the charger is in. When I take out, she stops lighting. Anyone knows what might happen?

    I know for several generations and years of experience with maps of system case and regular round, if the HARD Drive LED is connected backwards, the light is always when there is power to the motherboard.

    Good luck!

  • Satellite P100-160 - burning Vista CD/DVD very slow

    I have a brand new P100-160. The dvd/cd drive integrated in Vista takes 4 hours to burn 400 MB of data on a DVD.
    As a test, I also burned a full DVD I canceled after 18 hours.

    Does anyone else have this problem?

    Hello the

    Until we start our discussion can you please give me more info on things to follow:
    1 burning software you use?
    2. which blank media are you using? Have you tried little different like TDK or other brand products
    3. to what extent the RAM has your laptop?

    Please test with high quality blank media.

  • l've defragmented and also does disk clean up on my laptop but it is always very slow

    I have problems with my computer laptop amvhaving. It is extremely slow.  I did a disk clean up, Defrag, but it is still slow.  Windows defender is stopped, and it will not turn on automatically.  Could be the problem.
    I someone can help

    Hi DawnHudson,

    1. When did you start to question?

    2. did you of recent changes on the system?

    3. you have any third-party anti-virus installed on the system?

    Method 1: Run the fixit available from the following link and check if that makes a difference

    Difficulty of Windows system performance slow computer problems

    Method 2:

    You can also check the following items and see if it helps.

    Optimize the performance of Microsoft Windows Vista

    How to troubleshoot performance issues in Windows Vista

    Method 3:

    You can also read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

    Microsoft safety scanner

    Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

    Hope this information is useful.

  • After update 10.11.2 to 10.11.3 Programms folder is emptymand very slow system

    Hello

    I'm upgrading to OS X 10.11.2 10.11.3 yesterday. After the update my record programs was empty-no programs were there.

    The saw that all my files as downloads were empty, too. I opened the time Mashine to try a restore. It was awful slow. I went one day back in time and view the files to download in the time machine backup. Try to restore, Time Mashine just asked me to crush them. So, it seems that they are always there in reality but invisibl in the Finder. After leaving Time Mashine, the downloads folder was full of all the files downloaded again.

    Then, I tried to do the same with the programs folder. But viewing the programs folder has been extremely slow in Time Machine. It took ok minutes just to show the contents of the folder in Time Machine. A restore then failed because because the Tome Mashine replied that it is a folder OS X requires...

    FOrmme looks like the update has destroyed many. Is it possible for a roll regular return or is a fix for this kind of problem? This is not a working OS. Time Machine does not work properly, I don't know if my 500 GB iTunes library always works as iTunes went away, too... good work, Apple...

    Thank you

    KAi

    Hello

    I understand your situation, that the OS X update doesn't delete anything, he was just hiding any content from your mac. To put things to normal, since it is a systemic problem, I suggest your reinstall the OS (it will NOT delete your files):

    How to reinstall OS X on your Mac - Apple Support

    1. Turn on your Mac.
    2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
    3. Release the buttons after the appearance of the Apple logo.
    4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
    5. After that the recovery menu will appear, select the option to install OS X.
    6. Follow the prompts on the screen to select your destination drive and install OS X.

    See you soon,.

    James

  • Satellite L750 - very slow internet

    Hello

    I bought a new toshiba L750 and Wi - Fi connection is very slow (almost useless).

    I have a sony 5 years, sitting next to him using the same wireless connection and it is much faster (pages take seconds on sony, toshiba minutes).

    It must be an internet setting? I find it particularly slow in hotmail. Once loaded the pages once seem a little faster the second time, but always as fast as it should.

    any suggestion would be appreciated.

    Thank you

    HT

    Hey,.

    This happens in Eco mode? If so, it could be caused due to saving energy characteristic of the wireless network card. You must disable management feature in Windows to energy WLAN power management. You can set the WLAN card for maximum performance.

    What router you have and that you already have a firmware update?

  • Drive on Satellite L750 failure

    Satellite L750 HDD my wife seemed to have failed to be an enthusiastic amateur, successfully computer enthusiast, I've built a number of PC, I took out the disc HARD tried to reformat and install a copy of Windows 7. I have checked that on the laptop recovery software did not work.

    Before installing Windows 7, I tried to get rid of the partitions on the HARD drive, and although I could not get rid of all, I managed to reduce them. I formatted the reconstituted HARD drive and tried to load Windows 7 which seemed to work but when I got to use the laptop I had no drivers and no way to install as I had no internet access. I am now left with a blank HARD drive and I was contemplating the purchase of a Toshiba Recovery disk shape.

    My question is whether it'll work or I will have to take the laptop to an authorized dealer?

    You can use the Toshiba Recovery disk (please order first on the page posted by Timox) or you can install the Windows operating system using the disk from Microsoft. The drivers are available on the page of the Toshiba UE driver.

    You can use another computer to download all the drivers for the laptop Satellite L755. After the download, move it to USB flash memory stick and install on your L755 template.

  • Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

    Hello!
    I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
    I do the following:

    1. install Windows 7 x 64 SP1.
    2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
    3. install all updates of Microsoft Windows
    4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

    Here is the log for the first test (win7update.log) file:

    12\28\2011 update started at 21:11
    TVALZ_O.inf installed
    E/s installed & memory access driver
    driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
    util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
    Updated at 21:29

    After the restart I've run it again and the result is:

    12\28\2011 update started at 21:38
    Toshiba Bluetooth stack has already been installed.
    Toshiba value added package has already been installed.
    Updated at 21:40

    Any help is appreciated!
    Thanks in advance!

    Stand by.
    What are you doing exactly?
    You try to install own OS?

  • Very slow - Window 7, 266 mHz i7, Geforce 9800 GTx graphics card - computer was reformat hard drive, reloaded windows 7 and without other installed programs/games.

    My computer is running very slowly - i7 (quad) 266 Mhz and Geforce 9800 GTX graphics card.  I had this computer for about a year.  The problems seemed to start about 3 months when I started to play a game - Empire Total war with Steam.  The computer ran more slow and more slowly, gradually.  I tried all the clean disk, speed up programs, he worked once for a few days and then become very slow.  Finally, I backed up my files and reformat the hard drive and reloaded windows 7.  My computer has nothing loaded except windows 7 and is always very slow! Hardware issues? Help, please.

    Set of utilities to test for computer HARDWARE manufacturers:

    Note: If you are OverClocking or use an automatic overclocking or BIOS features, energy saving
    Start by disabling: Intel EIST, Turbo Mode, Cool and pretty
    and fall at the speed of stock as a starting point.

    Disconnect the other internal hard drives and external USB devices.
    Look for any loose hard drive power or cables SATA, graphics card or other power cables.

    CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    #1 Note:
    CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
    for each memory location is full.
    #2 Note:
    COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

    Prime95: Displays your actual speed of the processor when using CPU ID under a heavy load.
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 3 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
    35 to 40 ° C at idle and 60-65 c max when running Prime95.
    http://www.alcpu.com/CoreTemp/

    -----------------------------------------------------------------------

    Also: Try running Memtest86 +: it runs from a floppy disk or CD, you must remove or
    confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test - CD Bootable:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    Once Windows is installed:

    Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
    Check their support site for the latest drivers as the CD that came with the motherboard may have
    older less stable drivers.

    Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers
    for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
    or equivalent ATI.

    CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
    voltages, temperatures, fans speed.
    http://www.CPUID.com/HWMonitor.php

    Test of Stress of FurMark GPU (graphics card):
    http://www.oZone3D.NET/benchmarks/fur/

    Pass marks burn in test: http://www.passmark.com/
    Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

    HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    GPU - Z:
    A utility light, designed for you give information about your video card and GPU.
    http://www.techpowerup.com/GPUZ/

    PC WIZARD:
    A powerful utility designed especially for detection of hardware, also analyses more.
    He is able to identify a large scale of system components and supports the latest technologies
    and standards.
    http://www.CPUID.com/pcwizard.php

    Partition Wizard Home Edition:
    http://www.partitionwizard.com/free-partition-manager.html
    Note: There is also a CD bootable or versions of the bootable Flash drive:
    http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
    http://www.partitionwizard.com/bootable-Flash-drive.html
    Among the features and functions: create partition, Delete partition, format partition,.
    A partition resize, move partitions, Partition recovery after an accidental deletion,
    Convert the partition, partition Explore, Hide partition,
    Change the drive letter, a partition active Set, Explorer (content display) of the partition.
    Note: To complete any task use the "Pending Operations" box at the bottom left.

    Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
    EASEUS Partition Master Home Edition (free):
    http://www.partition-tool.com/
    Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
    Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
    It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

    Hiren BootCD
    http://www.Hiren.info/pages/Bootcd
    Hiren BootCD from USB (USB key)
    http://www.Hiren.info/pages/Bootcd-on-USB-disk
    (something more questions)

    UBCD4Win:
    http://www.UBCD4Win.com/index.htm
    UBCD4Win is a recovery CD bootable that contains software used for repairing,
    restoration or diagnose almost any computer problem.

    MyEventViewer - an easy way to display your event logs:
    http://www.NirSoft.NET/utils/my_event_viewer.html

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • My macbook air 13 "(2015) is very slow, even after a clean install"

    Hello

    I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.

    Etrecheck give ' "Performance: poor

    Is there a hardware problem? or what to do?

    Thank you

    EtreCheck version: 3.0.6 (315)

    Report generated 2016-10-05 10:18:11

    Download EtreCheck from https://etrecheck.com

    Duration 17:11

    Performance: poor

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Description:

    too slow

    Hardware Information:

    MacBook Air (13 inch, early 2015)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Air - model: MacBookAir7, 2

    1 1.6 GHz Intel Core i5 CPU: 2 strands

    8 GB RAM not extensible

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en0: 802.11 a/b/g/n/ac

    Battery: Health = Normal - Cycle count = 40

    Video information:

    Intel HD 6000 graphics card

    Color LCD 1440 x 900

    Software:

    OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

    Disc information:

    SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)

    Storage of carrots: disk0s2 120.47 GB Online

    USB information:

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Launch system officers:

    [no charge] 6 tasks Apple

    tasks of Apple 166 [loading]

    [running] Apple 58 jobs

    [killed] 9 tasks of Apple

    9 killed process lack of RAM

    Launch system demons:

    [no charge] 47 Apple jobs

    [loading] 158 jobs Apple

    [running] Apple 77 jobs

    [killed] 8 tasks of Apple

    8 killed process lack of RAM

    Launch demons:

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]

    User launch officers:

    [loading] com.bittorrent.uTorrent.plist (2016-10-04)

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)

    Items in user login:

    iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    uTorrent program (/ Applications/uTorrent.app)

    CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

    Plug-ins Internet:

    Default browser: 601 - SDK 10.11 (2016-09-03)

    QuickTime Plugin: 7.7.3 (2016-07-09)

    3rd party preference panes:

    None

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    14% WindowServer

    4% kernel_task

    0% SystemUIServer

    0% cloudpaird

    Top of page process of memory:

    670 MB kernel_task

    Mdworker (11) 188 MB

    Com.apple.CommerceKit.TransactionService (2) 41 MB

    Finder 41 MB

    Mds_stores 33 MB

    Virtual memory information:

    5.02 GB of free RAM

    2.98 used GB RAM (1.82 GB being cached)

    40 MB used Swap

    Diagnostic information:

    5 October 2016, 09:38:39 test - passed

    Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?

Maybe you are looking for

  • Change the default settings for Officejet Pro 8600 wireless printing

    I can't find a place to print in color, project.  The printer will print in color, black and white, black & white project, but nothing else unless I change something.  And I don't understand how to change/use settings predefined.  There is nothing in

  • HP Officejet Pro 8500 'unavailable' for Mac OS 10.7 installation software

    Try to set up this printer to MacBook via USB cable. Computer recognizes the printer and looking for appropriate software updates to install the printer. Several attempts have resulted in all "software is currently not available, contact the manufact

  • BlackBerry Z10 Z10 suspended 10.0.10.82 OS update

    I started the update on a Wifi connection and it went to 100%, but now it does nothing. Can not even cancel the update. Rebooting does nothing. How can I make this link BlackBerry good?

  • Internet connection is slow after changing the MAC address

    * Original title: win7... problems with internet after changing the WIRELESS card MAC address I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remain

  • X200s - fingerprint reader and wesite passwords

    I recently had to reload the OS and now I can not understand how to enable the option, which uses the fingerprint reader to connect to Web sites.  In the past whenever I visited a site that requried a newspaper in it asked me to slide my finger.  Any