Similar Questions

• Why did I get a notification saying "automatic downloads are not enabled on this unit, to allow them to go store parameters.

  I received a notification on my iphone saying "automatic download are not enabled on this unit, to allow, travel to store settings" is a normal notification because its never blown upward before and I had the phone for a year, the notification also happened on my ipad recently as well (well enough a day after notification jumped on my phone). Sorry if I seem paranoid I just hope that theres anything malicious on my device and the security has not been compromised.

  The two devices running the latest ios

  Also if you change the message too often it prevents edit you?

• Question of ISE 1.3 MyDevices Portal: you are not owner of this unit

  Hello

  I am facing a problem with the portal MyDevices.

  Recording BYOD-On-Boarding work pretty well, and users to access the network they need to do.

  However, when the user accesses the portal MyDevices, some registered devices (which already have access to the network) is shown as "Pending" State. But I do not think that it could be a problem because users can connect at any time and access the network normally.

  The problem is: when the user tries to modify or change the State of the device (mark as lost, stolen or Delete), they get the error message "you are not the owner of this unit; It belongs to someone els. "Contact technical support if you need help.

  P.S.: users are allways in the face of this error message, despite the device of State pending or registered .

  Does someone has faced a problem like this, or have an idea to help me solve it?

  Thanks in advance.

  Error message attached.

  Maybe this bug:https://tools.cisco.com/bugsearch/bug/CSCus79068 ?

  We have the same problem with the users in AD in capital letters. But lowercase users can remove and change machines without problem.

• HP Envy 110 moved from Germany to the United States: cartridges are not intended to be used for this printer

  A printer bought in Germany does not accept the US cartridges (I've tried 2 different cartridges of different retailers). The following error message appears on the printer screen:

  "The following cartridges are not for use in this printer."

  Definition of the region in the 'USA' printer settings does not resolve the issue. Phone support told me that it is not possible to change the region of the printer. Is this true?

  I found several messages in this forum for people having the same problems.

  Hello

  Change the region of the printer is possible, the information you describe is incorrect.

  First of all make sure that the black and three-color authentic and guaranteed HP ink cartridges - this is essential in order to reset the printer that you have right to this service for free under warranty of ink cartridges.

  So, you will need a computer with the printer installed in order to reset the printer.

  Once you have both the cartridges available, contact the phone holder once more and make it clear that you are entitled for that service, a support agent should guide you further with the process.

  For any question, use the link below as a reference:

  http://support.HP.com/us-en/document/c02558798

  You will find the contact information below:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Kind regards

  Shlomi

• My messages are not sent.

  I tried to message from a friend that is long distance, he lives in Ireland while I live in the United States. For some reason whenever we try to the other message, he would say "not delivered". I have the iPhone 6 and it has an iPhone 5, both we have also iMessages on and SMS off the coast. How can I fix?

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  Know what to do if you see an alert when you send a message or if you are unable to send or receive messages.

  First try these steps

  1. Make sure that your iPhone, iPad or iPod touch is updated to the latest version of iOS.
  2. If you have an iPhone or an iPad (Wi - Fi + cell), look for an update to the carrier settings.
  3. Check your network connection. To send a message as iMessage or MMS, you need to a cellular data or Wi-Ficonnection. To send an SMS message, you must have a cellular network connection. If you Call Wi - Fi enabled, you can send SMS messages via Wi - Fi. Contact your operator for more information.
  4. Check with your carrier to see if the type of message you're trying to send, such as MMS or SMS, is supported.
  5. If you try to send messages group MMS on an iPhone, activate the MMS messaging. If you do not see an option to enable MMS messaging or group on your iPhone, contact your operator.
  6. Make sure that you have entered the right phone number or e-mail address of the recipient.

  If you still need help, find your question below to see what to do next.

  

  If you see an alert that says waiting for activation

  Make sure that the date and time on your device is correct. If the date and time are not correct, you can change it. Then proceed as follows:

  1. Go to settings > Messages.
  2. Turn off iMessage.
  3. Then turn it back on iMessage.

  If you still cannot activate iMessage, contact Apple technical support.

  

  If you see a red exclamation point

  If you try to send a message and you will see with an alert saying no delivered, follow these steps:

  1. Press on , then press Retry.
  2. If you can not yet send the message, press on , then press send as a text Message. Messaging rates may apply. Contact your operator for more information.

  

  If contacts see your e-mail instead of your phone number when you send messages

  Your iMessage settings can be on receive iMessages and start conversations of your Apple ID instead of your phone number. Check your settings to see if your phone number is set to send and receive messages:

  1. Go to settings > Messages.
  2. Tap, send and receive.
  3. Make sure that your phone number is listed and selected under you can be reached by iMessage to and start new Conversations for.

  If you don't see your telephone number listed, you can add it. Follow these steps:

  1. On all your devices, go to settings > Messages > Send and receive.
  2. Enter your Apple ID, then tap Sign Out.
  3. On your iPhone, go to settings > Messages > Send and receive.
  4. Press on use your Apple ID for iMessage, then sign in with your Apple ID.
  5. Make sure that your phone number and your Apple ID are listed under you can be reached by iMessage to.
  6. On your other iOS devices, go back to settings > Messages > Send and receive.
  7. Press on use your Apple ID for iMessage, then sign in with your Apple ID.

  

  If you can't send or receive messages on your iPad or iPod touch

  If you don't have an iPhone, you can only send and receive messages with your Apple ID to other Apple devices using iMessage. To use iMessage, go to settings > Messages > Send and receive, and make sure that you are connected to your Apple ID. If you have an iPhone, you can link your iPhone number to your Apple ID in order to send and receive the iMessages of your phone number. You can also Configure text Message Forwarding , so you can send and receive MMS and SMS messages on all your Apple devices.

  

  If you have problems with a group message

  You could meet a group conversation and receive your own message. Or you could get a new phone number and see your old listed as a recipient in an existing group conversation. If you have problems with a group message, you may need to delete the conversation and start a new. Follow these steps:

  1. Open your Messages and find the conversation you want to delete.
  2. Swipe over the conversation, and then press DELETE.

  After you remove the group conversation, you can start a new:

  1. Open the Messages and press on .
  2. Enter phone numbers or your contacts email addresses.
  3. Write a new message, then press Send.

  When you delete a conversation, you cannot get it back. If you want to put parts of a conversation, take a screenshot. To save an attachment in a conversation, tap and hold the attachment, click more, and then tap saving.

• WLAN channels 12 and 13 are not available in Europe

  Hello

  If I run a German WindowsXP SP2 and VistaRC2 it is impossible to connect to access points using channels 12 and 13 which should be available in Europe.

  It is especially a problem when connecting to public access points where I can not change the configuration.

  All advice how to fix this problem?

  Thank you very much
  Dirk Roemer

  Hello

  Only 11 channels are used in the United States.
  So eventually the new Vista RC2 is not available to receive the 12 and 13 WiFi channel.
  He should know that the RC2 version is not the official final version of Vista and it contains more than 1500 bugs at this time. I think that this version contains the WLan standard values for the American market.

  In addition, Intel 9.x WLAN drivers implement a new specification that allows configurations specific to each country through access points (AP).
  If one of the APs in the range (not necessarily the AP, the wireless network adapter is connected to!) broadcast such a configuration countries, channels that are not allowed in this country, the Intel WLAN card will cease to use channels.
  In their default settings, APs supporting this specification will accept only channels 10 and 11.

• HP 15af131dx laptop: How can the 15af131dx be upgraded to 8 GB of ram if slots are not available?

  I recently bought a HP 15af131dx laptop.  I read the manual and was led to believe it was expandable up to 8 GB of ram.  I just read an ad that says that the two ram slots are not accessible by the client.  So, how can I bring my laptop?  I already bought a stick of ram to 8 GB of Crucial.

  HP 15 - af131dx Notebook PC product specifications and the HP Notebook PC (AMD) / HP 255 G4 Notebook PC - Maintenance and Service of Guide, , it seems that this model is limited to 1 x 8 or 2 x 4 GB. In both cases, the maximum memory based on the MSG is 8 GB of DDR3L/PC3L, 12800 1600 MHz. In addition, removal/replacement of the module memory is listed as a "procedure for only authorized service providers. There are 56 screws that must be removed, replaced or loosened when the upgrade of the memory of this unit. Please begin on page 24 of the GMS and see page 44 for the extent of what it takes.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Volume Z10 blackBerry buttons are not tactile feedback

  Hello

  I finally bought a z10 in a store in India, today. I was very happy with my purchase. But a few minutes, in the purchase, I was rather unsatisfied and disappointed. The reason: the volume buttons Up and Down was missing any tactile feedback and were uneven. The phone was made in may 2014 and was conducted at the Mexico. I checked a piece of screen and button feedback has been excellent.

  Have an any BB users faced you these issues. If Yes, have you guys tried to address these issues with the help of BB? have you guys managed to replace your phones?

  Help, please!

  Very much appreciated. Ta

  So, I don't see how it's lack of BlackBerry. Yes, the unit may be damaged. It gets to a certain percentage of any unit of mass production, be it a cell phone or a car. This is why there is a guarantee. BlackBerry is committed to stand behind it. However, everything goes through the dealer... IF this dealer is an "authorized" dealer If they are not an authorized dealer that BB will not guarantee the device so that the unauthorized dealer and buyer (i.e. you) gets ripped off because of poor quality of dealer unathorized commercial practices sell devices that are not supposed to.

• LEXAR Jumpdrive V10 8 GB (among other brands) - are not accessible by Win7 Pro 64-bit

  Strange that when unzipped, it load.  About 2 hours later, the light starts to blink all the time and has since been inaccessible (flashes rapidly).  The drive appears by name in the disk drives, with the letter 'F' portable devices and as a "mass storage device" in Device Manager USB controllers segments.

  Unit also not always appears in the 'COMPUTER' (workstation) screen, the icon in the task bar appears immediately, but without the eject button (it appears once the "COMPUTER" icon is enabled).  All the controls properties prove "the device work properly", but when I try to open the camera, it shows "empty folder", although a check of the properties of the 'COMPUTER' screen indicates that the disk is full.  I always charge 800 MB of data of my XP (32 bit) machine with "unable to access to" on the Win7 one (NO problem reading/writing on the XP - I even re-not formatted the stick - nada).

  I went through most of what I could find here on orders from USB thumb and spent four days trying various "patches" with no luck.  The idea that Win7 Pro might not be able to read the 32-bit files cannot be valid, as I have an OLD 256 MB stick loaded with files of 32 bits of my XP even machine with zero problems.

  As in the title, the problem was not itself limited to the Lexar player, but also a SanDisk ULTRA 32 GB and a "Business" Intenso 8 GB - these two "worked" as described above.

  All the drivers are up to date, all the "fix - its" have been tried (I was comfortable with)...

  Why not Win7 like USB keys except my "small" one?  Seems to be a widespread problem.

  Pete

  In my reply of 10 may, I noted that the problem has been alleviated/cured by unplugging the webcam.  There is a driver conflict that can be cured as soon as I update the BIOS and chip set drivers.

  Essentially, the problem can be classified as "cured."

• The unit does not start

  We have a 2.4.0.120 as a stand-alone unit and Data Exchange 5.5 has been corrupted (no backup - of course). We have uninstalled Dialogic and the unit (using the uninstall tool). We then uninstalled Exchange. After reinstalled Exchange 5.5 and the unit, the Unit reports to the registry the "could not initialize CallControl component" and then stops. The Dialogic cards spend diagnostic checks.

  Can anyone help?

  Well... looks like you yourself have a sick system. These errors are not a simple configuration problem that I can work through with you here, there is something more serious going on under the covers here and I don't know what it is - Dialogic card could go south, wav driver is toast, I don't know. It would be one of those moments that I would try to install from scratch.

• NEC DVD +-RW ND 3650 a unit will not read or write, all diagnoses tried did not work.

  DVD +-RW ND 3650 a unit is not reading or writing to the media. I tried the diagnosis MS-Fix - it, but he could not solve the problem. I am running MS7 Home Premium SP1 (build 7601) on a Deminsion of Dell E520 with 4 GB of RAM with 2.13 Ghz Intel Core 2 Duo processor. I ran MS-Fix - it, but it didn't Fix it. Mgr. said device the device works correctly, it is not. I checked for updated drivers and the drivers are up to date. I checked the internal connections and everthing looks good. Before installing a new optical drive can anyone lead me to a solution?

  Hello

  Don't forget to check the diagnosis with Dell Support, their documentation online, and ask for their
  Forums about known problems. Dell has a few good methods of troubleshooting on their site.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =======================================================

  Even if you did some of them before you begin please from the top and work

  down, jump, nothing, until the issue is resolved or these methods have been exhausted.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 PCs are not connected to the closest access point

  Windows 7 PCs are not connected to the nearest access point.  Any ideas?

  For example:

  We have AP 1 and 2 of the AP for exaple.  They have the same SSID.  AP 2 is further with a bad signal.  AP 1 is closest with an excellent signal.  Why my laptop does not connect to the AP 1?

  You MUST use the same SSID.  I think that you misread my post.

  And Yes, a channel problem is that what I have proposed.  You can try to configure access points using the 3 discrete channels (1, 6 and 11) to minimize any overlapping units to the same channel coverage.
  At least this is the traditional way, we do it, although the automatic selection increases common and 11n 40 Mhz channels (if defined in this way) are also in.

• You are not authorized to access \\DESKTOP

  I need advice on a situation that has changed after a pair of power outages last night.

  We have a network of 3 computers, desktops HP 2 running Win7 Pro 64 - bit, connected via GigEthernet. and 1 largely rebuilt laptop computer Dell Win7 Ultimate 64 - bit, connected wireless.  The network is led by an ATT U-Verse router, G-class.  We have a home group.  All members of the Group residential, and discovery of network computers is enabled.  Until today, I was able to access the laptop from my desktop and vice versa.  Today, all of a sudden, I can't access the desktop of my laptop, I get the error:

  Windows cannot access \\DESKTOP
  You are not allowed to access \\DESKTOP.  Contact your network administrator.

  It's just a problem with my desktop computer; I can connect on the desktop of my husband to the laptop and vice versa.

  The suggestion of aide said, making network course discover is on the desktop.  When I open the network and sharing Center and go into the advanced sharing settings, here is what happens:

  The page appears blank and then poster that discovery of the network is enabled, file sharing is enabled, etc..  The 'save' button at the bottom is grayed out.

  As I said, we had two successive failures, last night, and after another I struggled to keep my office.  Everything took a long time to start.  Finally I decided to restart in safe mode, press the wrong button and entered the recovery of the system, likewise, backed finally booted in safe mode and then restarted in normal mode.  Everything seemed normal until this morning when I tried to access the desktop from the laptop without success.  Fortunately the connection works Conversely; My GoodSync program running on the desktop computer is able to synchronize a list of files with the laptop.  But the laptop cannot open office, although to the best of my knowledge is shared everything and we are all in the homegroup - didn't change any settings and it worked last week.

  Suggestions would be welcome.

  I solved it in fact myself, using the well known workaround to the error "password required network".  I renamed my laptop and rebooted; Rename the name of origin, then rebooted again.  I can now access the files on the desktop. My husband, who could not see also my desktop files, rename it to double and could do to my system, even though he has not been to see the error "network password".  So this seems like a more general solution.

  During the second name change, I noticed that the laptop still belonged to a working group called the United States, even if both computers belong to a workgroup called workgroup. and I made this change at the same time.  So I don't know which of these corrections it actually did.  But the laptop has been able to access the files from office for months, even in the Group of work badly; so I strongly suspect that the rename-restart-rename-reboot sequence is what he did.

• Windows 8 says my headphones are disconnected, and they are not!

  Oh, God. I am so Mad.

  Well. Yesterday I installed Windows 8 x 64 in my PC, leaving Windows 7 x 32 behind.
  I had until now of speakers and headphones NGS NGS works PERFECTLY. While the speakers were connected to the rear plugs of the PC, the headset was connected to the front ones. I had configured their thanks to Realtek HD to work at the same time, if I turned on the speakers, while the headphones were still on.
  The headset includes a microphone, they have two cables, for reading green and Pink for the record, and they ARE connected to their respective catches.
  But I changed to Windows 8 and everything went wrong. Now, Windows detects my speakers, but does not detect the headset. They are connected.
  They AAAAAAAAAAAAAAAAAAARE. Y. Y. Y. AAAAAAAAAAAAAAAAAAAAAARGHHHH.
  But playback Audio convenience store in Windows says they are not. God. I uninstalled the drivers again and again once and again and again and again. Literally. Five times. And Windows Update automatically reinstalled them when I restarted the PC. And I don't know that they are good drivers because they have the same name as those had from my PC to Windows 7.
  I tried to put the helmet as the predetermined unit, but I can't. The button is unpushable (in gray) because how the * you want to set as predetermined something that cannot be detected? Well, I need help.
  I already checked article "No sound in Windows" and:
  -The sound card is freaking great.
  -The helmet is screwed connected.
  -The power and volume are high and on fracking. I'm not THIS delay, LOL.
  In any case, thank you for your attention.
  P.S.: They ARE connected!

  I'm SO bad * ss.

  I'll post what I did to get this to work.
  1. go to the page Web of Realtek: http://realtek.com.tw.
  2. look at the 'Quick links' section and click on "HD Audio Codec Driver.
  3. accept the nonsense above and click on "next".
  4. download the file according to your OS.
  5. install this chick.
  6 reset.
  7. go in Control Panel > hardware and Sound > Realtek Sound Manager.
  8. I'm tired. Look at this: http://www.youtube.com/watch?v=CCQOTBXFznw