6710 Pavilion: A newer card reader will replace the 504857-001 in my Pavilion

Similar Questions

• a newer version will replace the operating system if defective or damaged

  Hi I have a dell laptop, for 4 years, recently he would have even started, took to a computer guy? They said it was riddled with viruses and it could not start (too to cut a long story short I paid them $180) they had fine, deleted the virus to a point... just want to know if I buy a newer OS will this substitute any error with the operation in the previous version of windows and flaws? Thank you

  John

  Windows 7 requires a "Custom install / Clean, then Yes, Windows 7 installation will remove your hard drive with the exception of a Windows.old folder XP.» Before you attempt to upgrade, you should check if your computer can run Windows 7, but download the compatibility checker.

  If none of the problems you encounter are material related to a new installation cannot fix this.

  Have you check the web site of the manufacturer of your computer for Windows XP device drivers updated.

  Access the Dell support web site and search for Windows XP drivers for your specific model number.
  Using your Dell's Service tag number is the fastest way to get the correct drivers.
  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  If there is then Windows XP Download drivers to a folder on your hard drive and install all of them.
  beginning with the card mother/chipset drivers, SATA, Firewire (1394), LAN, Audio, etc, and so on.

  Updates BIOS (optional, only if necessary upgrade):
  You should check to see if there was one, or sometimes several updates BIOS for the motherboard.
  Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem.
  Read the instructions on how to your BIOS update/flash with a lot of attention and be of more
  you understand the process.
  Note: Do not forget that there is a risk of a bad flash/update occurs which can make your system unbootable.

  -The Windows 7 Compatibility Checker -

  Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  -------------------------------------- The Windows.old folder --------------------------------------------

  The Windows.old folder has two objectives:
  (1) can be used to uninstall Windows 7 and return your PC to the previous version of Windows.
  (2) contains a backup of all your files of data, documents, photos, Etc. from the previous version of Windows.

  If you don't need either of these two options can delete the Windows.old folder.

  Note: Option to change Windows Explorer to see the Windows.old folder:
  Click on start and enter in the box "Search": "hidden" (without the quotes)
  Click on the "Show the hidden files and folders" option at the top of the list.
  In the "Folder Options" window
  Click the 'view' if it is not already selected.
  In the list "Advanced settings" locate "hidden files and folders".
  Now click 'show files and folders '.
  Then, disable the following:
  "Hide empty drives in the computer folder.
  "Hide the extensions of the file types that you want to know."
  "Hide protected operating system files"

  Click on the "Apply" button and the OK"" button.

  How to uninstall Windows 7:
  http://support.Microsoft.com/default.aspx/KB/971762

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder:
  http://support.Microsoft.com/kb/971760

  Uninstall Windows 7 on a multiboot system
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-Windows-7-on-a-multiboot-system

  Where are my files and folders after upgrading from Windows XP or Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows7/where-are-my-files-and-folders-after-upgrading-from-Windows-XP-or-Windows-Vista

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
  http://support.Microsoft.com/kb/932912

  Using Windows.old to retrieve your personal files
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 66249.entry? a = 264056520

  How can I remove the Windows.old folder:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  J W Stuart: http://www.pagestart.com

• When I plugged in a new card reader, I lost all my saved for importing metadata presets. Now, when I type in a new and save it, it is not available. Help, please. Thank you, dwc

  Hi people,

  When I plugged a new card reader, Lexar Pro USB 3.0 Dual Slot player, I lost all my saved metadata that are used for imports.  Now, when I type in the metadata, it registers on the photos, but then it is not saved for later use, as it was before. I'm trying to save him, but it does not work. Any ideas? Is Lightroom 3, version 3.6.  10.8.5 Mac.  Thank you, dwc

  I think that's the problem. Go to the original catalog, uncheck it, close LR, open LR, and create the new catalog.

• SD card reader will not work (code 10) on Portege

  Problems with my toshiba portege.

  When I put a card in the reader, plug n play sound just so he recognizes her. but then, nothing appears, something about an error code 10 showing he cannot start.

  is it possible to fix it?

  Code 10 means generally impossible to start the device.
  This may have different reasons. First, the driver has not been installed correctly or there is something wrong with the hardware.

  What you can do is refreshing to the SD card driver.
  Please go to Device Manager, check the State of SD card reader and use the option Update or reinstall the driver.
  The driver must be placed on the page Web of Toshiba. I hope. :|

  Alternatively, you can remove this device from the Device Manager, and after that restart the CD device should be recognized again.

• Tecra M5 - SD card reader works with the factory settings

  Hi all
  My SD card reader has been in place. It will read a few cards of 4 GB and won't read other (usually newer).
  All cards in this problem area are Transcend cards 4GB SD (HC or whatever the format more later is)
  The cards, the M5 will not read can be read both my PDA, but also an old Tecra 9000 (who will also tell the other 4 GB cards)

  The PC was recently engineers have a problem so I asked to look at this problem. They reported that it was a software problem, because if they load the recovery CD (that is, to bring the machine to factory State) the SD card reader reads cards problem OK; Back to my setup and the SD card reader can not read cards SD - error message is "the request cannot be performed because of an i/o device error."

  So I guess that I need new drivers. Very well except that it has no drivers for the drive SD card itself. Its a part of the motherboard. There is a 'secure module SD' on the download from Toshiba site and I downloaded and installed the SD Secure module (dated 2008)
  However, Device Manager still shows that the SD host controller driver is Microsoft version 01/10/2002 6.0.4069.5

  If anyone has ideas on how to fix

  TFA
  R

  Hello!

  > back to my setup and the SD card reader will not read SD cards
  Can you explain what you mean, please?

  I put t understand why you n t run factory if it s a software problem. I never had problems with the factory settings because then I can make you that all functions work properly on my laptop.

  Good bye

• Is it possible to have the 'Home' icon to open a new tab instead of replacing the current page to the homepage?

  I would prefer the 'Home' icon on the Navigation toolbar to open a new tab instead of replacing the current tab with the homepage. Is there a way to do this?
  Thank you.

  If you middle - click the home will open a new tab that contains the home page.

• Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this

  Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this possible? Apple will provide an upgrade for free or minimum package 5se 5 seconds it's users?

  The terms of the terms of USE on this forum we cannot speculate on what Apple may or may not do. That being said, there is no priority for what you ask. There is no way of knowing how long your device will be able to continue to upgrade to new versions of iOS. As long as he is able to run the new versions of iOS, it is fully supported. This is the level of iOS, not the hardware that is important here.

  See you soon,.

  GB

• I installed a new card grafics since then the mask of model for a driver to display driver rotation.

  Original title: my computer ask for a display driver and I don't know.

  I installed a new card grafics since then the mask of model for a driver to driver display rotation

  Hi gerdablignaut,

  1. What is the brand and model of your computer?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  4. when exactly you receive the error message?

  You can check for any updated driver available via Windows updates and check if this solves the problem.

  
  Reference: How to manage devices in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Satellite P100-434 - graphics card gone will be the motherboard replaced?

  Hello!

  Last night, on my laptop screen went black on reboot, but the rest of the laptop seems to load very well. First of all, I thought it was the light back who had died, but an external monitor did not work either, so my son thinks that the graphics card is dead.

  The laptop is almost three years, but, fortunately, it is still under an extended warranty. My question is, repair the laptop, no doubt, replace the motherboard or is not cost-effective and that they will give me a new laptop? Also, how time Toshiba take to repair laptops under warranty?

  Thank you for everything hep.

  Emily

  Hello

  Of course, if the graphics card is faulty, you will get a new mainboard, and due to the extended warranty, it will be free for you. You will not get a new laptop, only the motherboard will be exchanged I think because it s cheaper as a new laptop and Satellite P100 is pretty portable. ;)

  I think that no one can say how long the repair takes to your laptop. It's always different and depending on the availability of spare parts. Therefore, you should ask the authorized service provider. They can tell you more.

  But I have to say on my laptop, that the motherboard was also exchanged the ASP. Repair didn t take much time, as far as I know it was only a few days. Nice service and the technician are cool people. :)

• E320 SD card reader will not work

  Have just got a new E320 and happy v so far except it will not read my SD card.  It's a 16 GB SD HC card that the manual says is OK

  I made sure to do all the updates of Windows

  I made sure to do all Lenovo driver updates

  I was surprised when I look in Device Manager under the smart card reader, it shows a F5521 Mobile Broadband driver?

  Help please

  Problem solved in E325 installing this:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS013697

  Lenovo support suggests to send the computer to be recovered from another country

  People from Lenovo. Please clean up your act!

• Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

  15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

  Kind regards

  Eyvind

  Hello @Eyka,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

  It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

  HP products - where to find Windows 10 drivers and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• SD card reader will not read a 2 GB card in Qosmio F10

  I recently had the motherboard replaced and now the SD card reader does not account for my 2 GB cards, but recognize even a 128 MB.

  An explanation or correction would be appreciated.

  Thank you

  Hello

  Have hmmm you tried to reinstall the driver of SD host controller and SD card driver?
  Please note that SD host controller driver should be installed first.
  After the SD host controller driver is installed, you can install the SD memory card driver.

• external usb card reader will not read anything beyond 2 GB cards

  my computer is running Vista Edition home premium 64-bit.  When I plug my digital concept 51-in-1 play/recorder card the computer will recognize, if I put in my mic of 1 or 2 GB sd he sees.  But if I insert anything bigger that that the computer sees the card, it does nothing.  So I don't know the card reader works.  I have another computer running the same OS but 32 bits and I have no problem at all.  Could there be a problem with the 64 bit?  Please help... very irritating!

  What is the EXACT make and model of drive?  It is Digital Concepts CR - 75 USB 51-in-1 Card Reader/Writer (if not, why)? So no matter where you had drivers, firmware or software for this devicce or did you just plug it and expect it to work with anything else required (which may indeed be the case, but I suspect not - I just want to know if you have anything to make it more compatible with the system).  Where did you get these files and where is the technical support (web site help - is it Sakar, http://www.sakar.com/contactus.aspx?)  If so, consult the following site:http://www.bestpriceaudiovideo.com/digital-concepts-cr-75-usb-51-in-1-card-reader-writer/.  You'll notice that it includes Vista as OS compatible.  Yes, I know, is to find work on the other Vista machine and it works even partially on this one - but he may still have some problems. "

  I would contact Sakar support http://www.sakar.com/contactus.aspx and discss the issue with them.  They have a simple solution, or they can tell you that you need to install some additional things (and I hope that tell you where to get them) or they can say that there is a problem with Vista 64-bit.  In any case, they know better than we do, and since you are 'install' as plug-and-play, then the issue is not Vista but the device and/or drivers, firmware, or software required for the unit (even if this wan't necessary in Vista 32-bit computer) of the product.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP card reader will remain not connected

  We use a software called easy dental and occasionally when we try to open it gives an error message saying that it can not connect to the database... After talking with our easy dental support team, they have advised that call us microsoft Windows XP and tell them that "our card reader does not remain", these are the details I only... they thought that Microsoft would be able to walk us through the process for solve the problem

  By design, a mapped network drive disconnects after a period of inactivity.  We should return quickly when necessary.  For more information:

  "Drive mapped to the network connection may be lost.
    <>http://support.Microsoft.com/kb/297684 >

  HTH,
  JW

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.