6th gen Nano replays of the songs.

Similar Questions

• error message 6th gen Nano when it is plugged

  When I plug my iPod Nano 6th generation in my Windows computer, iTunes opens and displays the following error message:

  "An iPod has been detected, but cannot be identified correctly. Please disconnect and reconnect the iPod and try again.

  If the problem persists, uninstall iTunes and then reinstall iTunes. »

  My computer detects the iPod, however; File Manager opens and displays my iPod as an external device, so my iPod has no harm to connect to my computer, iTunes only.

  I reinstalled iTunes twice and restarted my computer, but it does not solve my problem. My iPod worked fine until I installed Windows 10.

  Hello khepler07,

  Thank you for using communities of Apple Support. It is my understanding that you were making a mistake when you try to connect your iPod nano with iTunes. Connect to iTunes can be very important when you have an iPod. I want to help get this resolved with you.

  Looks like you did an excellent job so far. When uninstalling iTunes, it is very important that iTunes and related components are uninstalled in a certain order. If they are deleted in the mess, you can discover unexpected effects. Please follow the steps in the link below to confirm that iTunes and all the components have been uninstalled correctly:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  If the problem persists after removing and reinstalling iTunes properly, it is possible that the Apple Mobile Device USB Drivers are the cause. Please follow the steps described in the section "If you use a Windows PC" in the article below:

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• Is it worth the upgrade 4th Gen extreme 6th Gen with multi-Express configuration?

  I have a 4th gen extreme and 3 airport base express (2nd generation), each set up to expand, all connected to speakers of different sizes for listening to music.

  Everything is on a floor, not a big house, 920 square feet.

  I recently updated my Comcast service to 250 extreme.  Connected by ethernet, last night and got the 275 - ish down.  Pretty amazing.

  I have actually never connect by ethernet, everything is wireless.

  I have a recent Mac in the room more far-of-router, when I do everything.  A 3rd generation Apple TV is also in the farthest room.

  I got a refurb had 6 extreme Gen this week to try to take advantage of the extreme service 250 (I know that I won't do the same ethernet - connects, but...

  I am on the fence about the 250 thing).

  Implementation of the 6th gen extreme proved to be impossible - it just would not be put in place and I kept getting "unexplained error', whether on Mac, iphone, or ipad.  All new.

  And I'm pretty good with this sorta thing.

  So I thought, forget it, I'll return it.  Probably defective.

  My question is:

  With the multi-express in place, it is useful to make the new ac-router with "n" 3 express on the network?  Or should I just keep the low extreme, 4th-gen my extreme internet service 250 etc..

  Thank you!

  If you want to quickly get wireless, the only improvement will be a direct connection to the AC on 5 GHz router which means close and staff.

  The express will get no improvement because they are Wireless-N devices... and are perfectly adapted to the existing EI Gen4.

  My question is:

  With the multi-express in place, it is useful to make the new ac-router with "n" 3 express on the network?

  The answer is no...

  Unless you can get the router AC in a place that the computer connects to the it's 5 GHz directly... which means the same room or adjoining room, perhaps.

  You need to run ethernet (or even EOP adapters are not up to 250mbps) to a location near the Mac.

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• Not all the songs in a playlist are synced to iPod nano

  I checked a checkbox to sync a playlist consisting of 13 songs to my iPod shuffle, but only 2 of them are synchronized.

  Screenshot of a playlist in iTunes: https://i.imgur.com/V5MJEx6.png

  Screenshot of a playlist on iPod shuffle: https://i.imgur.com/4k1q5Gk.png

  Evidence any reading list is checked to be synchronized: https://i.imgur.com/B8Kp5Dt.png

  Listen to songs in iTunes itself on my computer. I would definitely say no songs are in their "native" to iTunes format, since I had to download from youtube and convert them to iTunes, but they're there and playeable, so I'm expecting to be transferred.

  Is this a known problem and how would I fix it? Thank you!

  I would definitely say no songs are in their "native" to iTunes format, since I had to download from youtube and convert to iTunes

  All the songs that do not synchronize these converts are songs?  That do sync the two aren't these songs converted?

  In iTunes, see list of reading, do a right click on one of these songs that are not in sync, and then read the information.  In the info window, go to the file tab.  That said it for the type and bitrate?

  In addition, the file Info tab, find location.  She gives a file path to the location of the song on your disk file, or should I say iCloud?  If she says iCloud, the song is not stored locally, so it does not sync.  And since these are not purchased songs from iTunes Store, IF they are only in iCloud, they must be in your music to iCloud library.  If would be important to know if yourmusic to iCloud library emanates a subscription to Match iTunes or Apple's music.

• 6th generation Nano more often used to synchronize

  Just got a used iPod Nano 6th generation, and I'm in trouble.

  I have an iMac 27 inch, model late 2009, running El Capitan. I have the latest version of iTunes.

  When I connect the iPod to the computer via most of the USB sites, it does not appear in the Finder as a mounted drive. However, it fact appear in system information under Bus USB 2.0-> Hub-> iPod. The system seems vaguely aware that there is a connected iPod, but doesn't let me do anything with it. The iPod itself says that it is connected, and it charges with success.

  However, when I plug the iPod into either of the USB slots on my Apple wired keyboard, it fact appear in the Finder. Basically, on 6 slots USB (4 on iMac) and 2 on the keyboard, it will only reveal when it is connected to one of them.

  Once I got it in the right port USB, iTunes has been able to recognize the iPod. However, it seems especially want to synchronize. Usually it hangs there for several minutes while trying to synchronize before you say it's impossible: "iTunes could not copy X to iPod Y because the file cannot be read or written.". At this point, there usually is no longer appears in iTunes (even if it is mounted in the Finder).

  Sometimes successfully, it syncs, but 90% of the time that it just hangs up. I don't see a model when this happens. I wrote this, I was able to do accept a synchronization of two podcasts and a song, and then it stopped working again.

  I tried to reset the iPod and be in and out of disk mode. I was unable to restore factory default via iTunes: nothing happens for awhile, then iTunes says that it cannot.

  I tried to manually add files to the iPod by dragging on in the Finder. This usually causes Finder hang and then must be restarted. In some cases, I can't even restart Finder until I pull the cable the iPod, as the whole system crashes.

  I used on the iPod disk utility, to fix all the errors (he found) and to clear its contents.

  I wonder if this is related to the USB cable, but I guess my thought is that if the cable was defective, wouldn't I have not have done until now? It shows in the Finder, cool and sometimes allows to synchronize a file. But I could well be wrong. Before I go buy a new one, I thought I would check here to see if it could be something else.

  Any help is appreciated. I have this during 4 hours, try different things, read troubleshooting guides, forum posts, etc.

  Your Mac is old enough to have ports USB 2.0, so your 6th gen iPod nano should work well with it.  My Mac mini's 2011 (last iTunes and OS X running); It works very well with my old iPods; most of them are older than your iPod nano.  It should work on the direct USB ports on your iMac.  It is strange that it works a little better on the free USB port on your keyboard.  Normally, I would suggest using a direct USB port on Mac when troubleshooting.  And your USB cable is probably fine; I would bad cable try another cable or using your cable power with another Apple device (if possible).

  First, you must use the procedure to Reset SMC (System Management).  It serves as a general hardware reset for the Mac.  For an Intel iMac, it's basically unplug the power cord from the iMac and reconnect it, at the end of a specific procedure

  Reset the management system (SCM) controller on your Mac - Apple Support  (see Reset the SMC on Mac desktops)

  You can also make the correct procedure to Reset NVRAN ("PRAM") ol ', just in case...

  How to reset the NVRAM on your Mac - Apple Support

  NOW, you can try some real tests to narrow down the cause of your problem.  These are separate test.

  (1) stop (power off) Mac and disconnect all the USB devices.  You can leave your connected USB keyboard/mouse.  Do this Reset (reboot) of your iPod

  Learn how to reset your iPod - Apple Support

  Start the Mac, launch iTunes and connect the iPod to a USB direct on the Mac, by himself.  Is there a difference?  This is to exclude a conflict between connected USB devices.

  (2) the iMac in Safe Mode startup

  Try safe mode if your Mac does not end commissioning - Apple Support

  In Safe Mode, the extensions of the system of third parties (such as device drivers) are not loaded when you start.  In addition, the third party background processes that launch automatically when the connection do not run.  This is to exclude a conflict with a third party software that may interfere with the iPod.  Your iPod should (normally) always connect with iTunes in Safe Mode.  Try things like the synchronization and restore in iTunes.

  (3) create a new 'Test user' account in the users and groups System Preferences pane.  I have a user account on my Mac named Test user.  This user account can be Standard (not administrator). Disconnect , then reconnect you user account.  Do not use Quick user change.  In the new user account, run iTunes and connect your iPod.  iTunes uses a new iTunes library.  Add a few songs to test the library.  Try things that don't work well in your usual user account.  This is to rule out a problem related to your usual user account or iTunes library.

  (4) you can do another test, if you have something like an external drive that can be erased.  Use the Setup program for El Capitan downloaded from the Mac App Store to install an external OS X "fresh" on the hard drive system, after erasing it in disk utility.  Startup test of external drive system.  Launch iTunes, plug in the iPod and try even.  This is to rule out a problem with your existing system of El Capitan, which can inherit problems that you apply updates over time.

  In each case, if the iPod works normally for this test, you have reduced the cause.  You can then focus your troubleshooting to find the exact cause.  Please post back with new discoveries...

• Why the songs on my iPod constantly repeat?

  Why the songs on my iPod Nano are continually repeat?

  The last week or so, what song will repeat until what I hit the next button.

  You have probably enabled the repeat a parameter.  If your iPod nano has a touchscreen (6th gen or 7th gen), the setting is on the now playing screen.  Setting repeat button looks like two arrows in a loop.  When the value Repeat One (repeat current song), there is a small '1' on the symbol.  Tap to set Off repeat or repeat all (repeat current list).  This is the guide of the user for 7th gen nano

  https://manuals.info.Apple.com/manuals/1000/MA1624/en_US/iPod_nano_2015_user_gui.PDF

  See page 19 for more information on the songs repeat.  If your iPod nano 6th gen, it is similar, but you may need to drag the current playback screen to see the repeat button.

  If your iPod nano is older, with a wheel, please after return.

• iPod nano plays only one song at a time

  We have two iPod Nano at home, and with both, must press 'next' to get another song. He just continues to play the same song over and over again... They both used to play shuffle or a whole list as requested...
  What is the problem?

  There is a setting on the iPod to repeat.  The choices for this setting are repeat Off (without repetition), all (repeat current list) and one (repeat current track).  Your iPod can be set to repeat one.

  If the iPod has a click wheel, the repeat parameter on the settings on the iPod screen.  Go ahead and repeat all or Offvalue.

  If the iPod is the current model touch screen (or previous gen 6), the setting is on the now playing screen.  The button looks like two arrows in a loop.  Tap to change the repeat setting.  See page 19 of the 7th gen iPod nano guide user (where it says repeat songs)

  https://manuals.info.Apple.com/manuals/1000/MA1624/en_US/ipod_nano_user_guide.PD f

  (If your nano 6th gen, you may need to drag the current playback screen to see the button repeat .)

• The song of the same artist groups it as a different artist?

  When I add a song from an artist in my ipod, the group as a different artist songs from the same artist that were already on my ipod. I checked the name information and artists are written correctly. On Itunes, it includes the songs under the same artists, not jut not on my ipod itself.

  I have a 7th gen ipod nano

  Hi goodybear,

  I understand that you have questions about the collection of songs in your iTunes library and your iPod. I have a story for you that might be able to clear up this issue, and it is found below:

  Why the songs with the same album art are not grouped together? -Apple Support

  https://support.Apple.com/en-us/HT204538

  Be vigilant and thank you for visiting the communities of Apple Support.

• iPod Touch 6th Gen Home button

  Hi all

  So I bought a new iPod Touch 6th generation. The Home button has been simply insensitive requiring a heavy click to do anything. Too strong and I would like to invoke Siri. I had to press in the exact Center.

  Apple replaced just that far unfortunately this replacement too is faced with the same problems. Be disabled I do not press hard and light clicks are / have never had a problem with my iPod Touch 5th generation or 3 iPad.

  So I'll call Apple again, I check with other owners in case of sensitivity of the button Home has been changed.

  See you soon.

  I had a 6th gen for a year or so and not noticed who need additional pressure on the home button.

• ITunes does not recognize the songs and the old shuffle stop at 30 seconds

  I have an old shuffle, 1 MB, maybe a 2nd gen, gold (A1204 EMC). iTunes (iOS 10.11.4 12.4.1) has problems with the shuffle. He quickly recognizes the shuffle, which appears as a mounted device and on the desktop a moment, then it reports that there are no. The shuffle disappears from the desktop and I get a warning saying that it has been deleted without eject.

  ITunes then freezes and I have to force quit.

  I can charge the shuffle, but when I go to listen to the songs, they last 30 seconds or less, the following starts then and in about 30 seconds, it will stop followed by another song.

  I tried to reset (turn on, turn off for 5 seconds and turn on) several times but nothing changes. I tried to erase using disk utility (15.0). The shuffle will not disassemble process works.

  All of the suggestions. My 2009 iPod Touch works better than this most recent shuffle. I like to use the shuffle when you do yard work.

  Same thing happens when I try to sync the shuffle using a snow leopard starts.

• iPod Nano holds only 1800 songs

  Why my new iPod Nano 16 gb will synchronize only 1800 songs. I've never been so few songs on a front Nano.

  This has to do with the format of the songs that you put on the Nano and their length.

• My Ipod jumps on the songs

  My Ipod nano 7th generation jumps on the songs, and I can play at all.

  What could do?

  All the songs or a few songs?  If some songs, he always jump on the same songs, or songs at random ?

  First, do a Reset (reboot) on the iPod

  Learn how to reset your iPod - Apple Support

  If this does not resolve the problem of jumping, you can do a restore of the iPod using iTunes.  This erases the iPod, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• the music starts with the 1st song in the song list when you plug a headset or cable to the

  My iPod touch 6th generation always starts with the 1st song in the song list whenever I plug a headset or cable to the.  How can I stop this?

  I think that when you plug the headphones into your iPod, it begins to automatically play the first song because your music application is still open. You can stop it by opening the music app and pausing again. Or just press pause on the screen of reading here and close the application.

• iPod Touch does not have 6th gen.

  So my 6th generation iPod Touch decided to completely brick itself. It is quite insensitive, appearing by all measures to be extinct. It does not have to be plugged into a charger or computer. I tested with several threads to make sure that's not the problem. All the buttons do nothing, no matter how long they are kept pressed. I seem unable to force it to turn it on (or stop, if it's just particularly good at playing dead) and can't seem to do anything but keep papers.

  I did not anything out of the ordinary to cause damage, so I don't see why it would be brick suddenly like that. I am running the latest iOS with the updates so far. As far as I can tell, it's just death. Everyone knows a similar problem or have any ideas on how to fix it?

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  Helio83 wrote:

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  The Apple Store is a good idea. You have restored iPod from a backup of the previous iPod? See if any of these articles get the operation of the iPod. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Supportand If your iPad, iPhone or iPod touch does not respond or won't turn on - Apple Support

  -AJ