70 d stuck shutter button

Similar Questions

• Frozen opening control and shutter button after the firmware update.

  I've updated my sony nex 6 to the latest version of the firmware 1.01. After that, I noticed sometimes my camera froze. The opening is indicated as - and the shutter button does nothing. I have to remove the battery and put it back to make it work again. Sometimes with my zeiss lens and more often with my goal of 18200LE. Not sure how to work around this problem and what is the problem. I've reached a point of almost fed up with my camera. Need help!

  The exact model is SEL24F18 zeiss 24mm f1.8 on the latest firmware. Camera and the lens are on the latest firmware. Sometimes, the camera shows the f-stop and I have to remove and replace the battery to operate.

• Sony Cyber - shot DSC - H2 shutter button

  The shutter button was broken and fell out. How can I replace it? Thank you.

  The DSC - H2 and H5 have a serious design flaw, shutter button positions are about 1/32 of an inch thick and break ALL THE TIME. Don't waste your money buy another one from Sony for $25 + because it will break again.

  You want an aluminum pole so that it will NEVER break again! Sony does not sell them, and won't admit that there is a problem with the design of the camera. They will charge you $171 to fix the camera if you want to send to them well! Not a very good deal if you ask me.

  The only place to get a position of massive aluminium shutter release button comes from the Darntoothysam.com and the full package of repair is only $70 if you want to send in for repair.

  $25 for the same position in plastic that has already erupted, or $25 for a solid aluminium with a lifetime warranty that it will never break again?

  http://www.darntoothysam.com/products/S...-%232.html

  Thomas Drayton
  Owner http://www.darntoothysam.com

• My button / stop, shutter button and volume button works sometimes not

  Hello
  I just bought a xperia premium z5.
  Is the hardware or software problem?
  I do not know
  Sometimes the fingerprints without being detected. (not available material fingerprints) and the volume button and the shutter button cannot work/press
  Have you guys had the problem?

  Help!

  HII
  Please try power button repeat

• Camera shutter button problem?

  Hi guys,.

  Just got my new Xperia Z3, and the physical camera shutter button seems odd to me - I was wondering if there is a fault on my device, or just a strange design, I'm not used to / was not expected?

  There is absolutely no return of soft click unlike all other buttons on this side of the phone, it just gradually more moving inward until its luster with the box.  Slight pressure on the button executes the autofocus, but in order to activate the button completely (i.e. to wake the phone in camera mode, or to take a photo), it seems to take a significant amount of pressure.  What I mean by it is that there is no way that I would be able to push it without opposing the force of the other side (i.e. strong adhesion), and when held like a normal camera, I have to shake hard enough I can keep isn't quite the phone always (that is, it moves or my hand starts to tremble!) - who , I thought it would take pictures at night a nightmare!

  Just curious to know how work of others, similar experiences or is markedly different mine and I should get it changed?

  Thank you very much

  Greg

  I'm not up to speed with the Z3, but experience with the Z1 and Z2, there is normally an indication of sound by clicking on the button has been pressed down and requires no more than normal pressure - so, if this is not normal so I would like to return my unit to place of purchase or ask the Xperia and have it inspected http://www.sonymobile.com/global-en/support/contact-us/

• Camera no longer works on the shutter button

  Update my phone to 5.1, when you press the quick average shutter button taking pictures, it now takes 30 seconds for the camera to come on the screen then flickers and will not take a picture. Is there anyway I can reverse this upgrade, because he is not is not improved with anything on my phone, it's always very difficult to hear what ringtone or plays music and now I cannot take pictures correctly. Thanks in advance.

  Try to clear the camera application data.

  How to erase data on applications.
  From your home screen

  1. tap the icon of the Application screen.
  2 find and tap Settings > applications.
  3. slide the tab all.
  4. find and tap the camera application.
  5 tap Force judgment > clear data.
  6. restart the phone

• key press shutter button

  DB and dev rel2 10g,
  Hi all
  I am trying to use the button for the first time driving, and I know that it fires when the user clicks the arrow down on the keyboard.
  
  and I have a text element t with the trigger of button pressing and a t-list "t3".
  When I press the arrow down while I'm standing on the 't' to go to the t list, nothing happens, no error.
  Why is this happening?
  Thank you very much
  
  Published by: newbi_egy on March 14, 2013 16:52

  I think that triggers key replaces the normal functionality,

  Yes, it's true.

  for example, I created a text_item with a touch low trigger to message ('aword') and I did it without any problem and in this case, it does not open the list, it gets only the value of the following without the list view record.

  Yes of course. How it works in a text element.

  But you asked:

  a text element t with the trigger of button pushing and I a t-list 't3' when I press the arrow down while I'm standing on the 't' to go to the t-list, nothing happens, no error. Why is this happening?

  When you use the arrow key down when the cursor is in a tlist, pressing shutter button does NOT work. Instead, the arrow to select the next choice lower than present in your tlist. But if you are on the last choice, or there is that only one in the list of your items tlist, then nothing happens.

• iMac G3 stuck power button / stop

  So, I bought a G3 iMac on eBay. It's a PowerMac 2.2 If you need this information.  A few months later, the power button is stuck in. So I have to keep hitting the power button to get it to turn on. And if I shake the computer, you can turn off. All solutions on how to get this button to be able to take off. The computer was probably not the best handle I see a few pieces chipped through the case and the door for the RAM has tape on it since there is nothing to hold the bottom.

  The initially supplied with your iMac keyboard has a power button.  If you use this keyboard, can you use this button to power instead?

• Mini IPad 2 retina :(STUCK Home button

  Any ideas on how to dislodge the button under the home screen? I really don't want to pay $50 +, but if it comes to that then Yes... I tried pushing down as hard as possible and dragging it but it is completely pressed and nothing helped. Super Glue a piece of something in the home button and drag?

  http://imgur.com/RbC5kBP

  EDIT: FIXED *.

  
  

  
  

• Pavilion x 360 S128nr 13: 13-S128nr audio controls Pavilion x 360 stuck with button mute indicator light turned on

  Just opened the box for a HP Pavillion 360 13-s128nr x. I turned it on and after execution by the installation, the light on the button mute was turned on and the volume indicator screen persists above all windows to the muted level. If I try to increase the level of the speaker, he quickly (but not instantly) decreases down to 0. I have tried to uninstall/reinstall the audio drivers, updated the bios and resetting windows with no joy.

  I'd appreciate any help.

  EDIT: I just noticed that the touchpad does not work also. I wonder if it is related.

  EDIT: If I kill Explorer in the Task Manager, the problem goes away. Explorer to check the cause of the problem come back.

  Support do me a full system restore. The problem persisted, so he returned.

• Equium P300-16 t with Synaptics touchpad. Stuck left button?

  Hi all

  I have an Equium P300-16 t with a Synaptics touchpad.
  A few months back I had the following problem. As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point. I've updated the drivers, tried a system restore, checked under the button of touchpad for obstruction etc and nothing has changed.
  I made a completely new reinstall of Windows... still the same problem. Suspected a defective touchpad, so I contacted Topaz for a replacement touchpad mounted that and still the same problem.

  so... after having eliminated defective drivers/software/hardware, I'm out of ideas. Is there anything else I can check?

  Works very well with a USB mouse.

  Thank you

  James

  > As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point

  I think you should check the settings.
  In Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  Here, you should be able to get all the parameters of the touchpad.
  In my case, I found interesting feature in the speed of the pointer and typing parameters.

  There is a charming area of tape, and if you enable registration you could get access to other environments of tapping.
  The option is called DragLock in my case that his automatic release and auto release delay value is set on the court.
  Recommend you check this!

• Stuck record button

  OK, it happened once more. On a shoot reality and the record button will not work... nothing. And I can't even disable the camea. The only way is to pull the battery. But then when I turned on the camera again media "recreate" lights up. Second time this has happened. The problem is when your in the milldoe of a scene and it happens, live it to the top of the scene for a while. WTF!

  
  

• Red stuck wireless button between "off" and "off".

  I have a Pavilion dv7t-2000 running on windows 7. My wireless was working last night, and I turned off the computer normally. This morning, before turning on, I cleaned up (which occupies the keyboard and wiper switch panel). Now, I can not wifi to turn on.

  When I press the button on the right side, it remains red, and on the screen above it in the corner, he shows the messages 'off' or 'off '. This happened to me once before, but I don't remember how I fixed it. Normally, the switch works fine passing between the blue and red.

  Someone already had this problem?

  Thank you.

  Actually, I tried that first, as it usually works well for a variety of issues. I found myself fixing it by restarting in safe mode with network and then restart normally.

  Thanks for the help.

• How to connect a database using coding in the shutter button in forms

  Oracle forms6i
  
  Hai All
  
  Y at - it a possiblity to connect using the coding of data bases.
  
  For example, when we open a form and we use some button and write some coding and when we run a small will appear and give us the user name, login name and database name.
  
  It is possible it when we create a button and this button we write our database name, the login ID and the user coding and when we exe it will connect to internal database Pls tell me...
  
  
  Concerning
  
  Srikkanth.M

  Use the LOGIN procedure

  PROCEDURE LOGON
    (username  VARCHAR2,
     password  VARCHAR2); 
  
  logon('scott','tiger@orcl');
  

  Mr.Srikkanth.M if you do not close your old questions do not answer your question each time... so please remember if you think that the response of the person is useful or appropriate mark it accordingly

  Thanks :)

  Bangoura
  [My Oracle Blog | http://baigsorcl.blogspot.com/]

• Shutter button does not

  Hi all

  Is this correct?

  CREATE OR REPLACE TRIGGER XXST_USER_RESP_ASSIGN_TRG

  INSTEAD OF INSERTING IT ON FND_USER_RESP_GROUPS_DIRECT

  for each line

  BEGIN

  INSERT INTO XXST_USER_RESP_ASSIGNMENT (user_id, responsibility_id)

  values (:New.user_id,:New.responsibility_id);

  commit;

  END;

  When I load, view FND_USER_RESP_GROUPS_DIRECT is the filler. But XXST_USER_RESP_ASSIGNMENT is not met. Above all wrong?

  Hi Jagadekara,

  For INSTEAD OF INSERT triggers work on points of view, there are some restrictions:

  The view does not contain any of the following constructions:

  • A game operator
  • A SEPARATE operator
  • An aggregate function or Analytics
  • A clause GROUP BY, ORDER BY, MODEL, CONNECT OR START WITH
  • An expression of the collection in a SELECT list
  • A subquery in a SELECT list
  • A subquery designated WITH READ ONLY
  • Joins, with a few exceptions, as described in the Oracle database administrator's Guide

  If you look at the definition of FND_USER_RESP_GROUPS_DIRECT in EBS, the view contains the DISTINCT operator, so it won't work.

  Kind regards.

  Rajen