My button / stop, shutter button and volume button works sometimes not

Similar Questions

• Captivate swf issues navigation - buttons sometimes work, sometimes not

  I have a single file Captivate 5.5 with 100 + slides. I have the back and buttons next on most of the slides, as well as navigation buttons to slides of early for the various sections in the module.

  Some nav buttons work well all the time, some never work right and some are intermittent - sometimes they work, sometimes they don't. When they do not they either go to the wrong slide, nothing happens.

  I'm puzzled why this is happening. The properties of the buttons that work are identical to those that are not. It is possible that I have slides quiz grouped throughout the module. I wonder if the problem might be related to that.

  Any ideas?

  -Stuart

  Hi Stuart,

  The malfunction buttons are placed on Quiz slides?

  Can you copy and paste all the slides to a new empty project at the same resolution and republish that. (Note, you must deselect the result Quiz slide before copying, as it can ' be copied)

  Do see you the project locally or on LMS?

  Thank you

  Anjaneai

• defrag and chkdsk __will works is not due to a disk volume error__

  Hello. Windows xp home edition. Defrag works is not due to an error of volume and chkdsk is scheduled, but does not. restore only has a point in there for some reason any and tried, but will not fix the problem. ran chkdsk only, would not end because of the mistake of volume. How can I correct the mistake of volume and the chkdsk to run with restart and defragmentation without restore complete system.

  Hello

  Try running chkdsk from the recovery console and then try to make the disk fragmentation.

  Note: /r locates bad sectors and recovers readable information. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  a. Insert the Windows XP CD-ROM in the CD-ROM drive and restart the computer.

  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  b. when the "Welcome" screen appears, press R to start the Recovery Console.

  Note: If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.

  c. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.

  d. at the Recovery Console prompt, type the following command, and then press ENTER:

  Chkdsk /r drive

  e. allow it to run intact until the completion (45 min or more)

  f. report any error

  Take a look at CHKDSK in this article.  http://support.Microsoft.com/kb/314058

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Assistance button works do not (= does ' t start VAIO Care Rescue) after having lost and recover the partition table / MBR

  Hello

  For some reason that I lost my patition table but I was able to get it back and I'm rewriting MBR. I'll be back all my partition and files contain the VAIO recovery partition except files on the operating system partition ("C:\ »). It's an unformatted partition. VAIO Care rescue didn't work so I had to format "C:\". "and reinstall windows 7 and now all is good.

  I have VAIO Care Rescue. I think that it is enough to change the partition table / MBR. What exactly is the problem and is it possible to fix the problem of button Assist?

  
  And if one removes all xxxx (include VAIO Recovery) and creates new ones, is it possible, software or image of the recovery restore partition and Assist button start VAIO Care Rescue?

  My laptop model: VPCEA25FG

  Thank you

  You can restore your computer back to factory with all the pre program and software installed by using recovery discs. For further assistance, please recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/support/product/VPCEA25FGfor your model of Asia-Pacific computer. Thank you.

  If my post answered your question, please mark it as "accept as a Solution.

• All of a sudden, multiple problems suddenly, as no address bar, back button works do not, etc.

  On my computer starts, when I opened firefox, everything was different (at the time I installed Lavafox and darker Google) home page has not been loaded (instead, it was the new tab page with recent history pages), the address bar was visible, but did not show any page or tab unless I started typing something in it the back button didn't work, my toolbars have been stripped and do not show up until I switched their show/hide, there is an empty space of 1 inch at the top of the browser between (the border with the mini/max/close buttons. and the tab dropdown Firefox mainmenu)

  It seems that all my problems have been resolved by simply disable all my Addons and reset of firefox. Must have been one of the addons do not behave.

• Camera button works is not only on the application native camera

  Hi all!

  I can't work with my native Xperia Z2 only on the camera app camera button. If the first step is pressed, it wakes the phone and begin to focus, but the second step doesn't work at all (only on the native app)
  It does not take pictures in all modes (auto, manual, facing the camera) and don't start recording.

  I've tested on other applications (Google camera, Instagram and so forth) and works as expected, the two steps with a click of the button. And button also passed the test in the System Diagnostics.

  Already deleted the money, deleted all the data, tried to CCP. Everything.

  In summary, will not work on Sony Xperia z2 native camera app, but works anywhere else!

  Is this a problem of update of Marshmallow? Is this a problem app?

  Thanks for your time,

  Billy

  Unfortunately if it depended on local support, I might as well throw it in the trash! I'm of the Brazil and that's how clients support usually work. They will say that the phone has a critical problem and will tell you to buy another... Hehehehe

  Thanks to all for help! Best regards!

• 2 overlap of the buttons works do not (CS4)

  Hi, I created a banner and the whole of the clickable area with an invisible button. But there is a small element in this banner I want to give a roll over for extra fun State. This element has no need of a link attached to it just to change color when wriggle on. When I put the invisible button on the top, it blocks the element on top the invisible button is not working either. Since it's a banner I put paper in place in as2. How can I fix?

  One way is to cut a hole in the invisible button on the surface of the object you want the rolloer to work for, but you should always have a click assigned to this object for the continuity of the link if that's important to you

• the Random var button works only not with the switch statement

  I have a button randomly on the erasure of the scene in. I'm testing button that fades in, because I have different URL according to the button it is on. Here is the code that I use, and which generates no errors... just does not work. I am unable to find the correct key, but do not work my switch statements. I don't know if it's one thing to syntax or another problem. Thank you!!

  var currentImage:MovieClip;

  var arrGrowing:Array = new Array (resume_mc, magazine_mc, suitcase_mc, monopoly_mc, superhero_mc, hat_mc,

  chair_mc, books_mc, lightbulb_mc);

  for (var i = 0; i < arrGrowing.length; i ++) {}

  arrGrowing [i] .alpha = 0;

  arrGrowing [i] .buttonMode = true;

  arrGrowing [i] .addEventListener (MouseEvent.CLICK, onButtonClick);

  }

  function initLoop (): void {}

  currentImage = arrGrowing [Math.floor (Math.random () * arrGrowing.length)];

  var exitTween:Tween = new Tween(currentImage,"alpha",Regular.easeOut,0,1,12,false);

  }

  function onButtonClick(e:MouseEvent):void {}

  switch (currentImage) {}

  case resumes:

  var url: String = "http://www.yahoo.com"; ""

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_self");

  break;
  }

  I don't see where CV refers to any thing implied by your code.  There is a resume_mc if that's what you're trying to test.

• all the buttons work only not on the monitor source except the space bar

  I just downloaded a trial of adobe first cc 2015 but unable to do all the regular stuff in my source window. all buttons are unresponsive except the space bar (it will play the file). I can also drag the video in the timeline, but still unable to make other edits using the buttons... any ideas anyone?

  Try this:

  Restart your computer, hold down the shift + alt key while opening the first up to the Welcome screen.

• 15 - ac185no: Fn + F buttons work do not

  Hello

  I bought a new laptop HP 15-ac185no with Windows 10 yesterday and found that none of the keys work.

  It seems that I could not find the drivers for it for my model, so I looked at some of the other threads on this topic, and none of the solutions he worked for my computer. Is there a driver I can download?

  Thank you!

  Hello @AnsoMannso,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of keyboard and wanted to help!  I understand that the Fn + F key combination does not work.

  First, try to download and install the following driver: sp75728.exe

  If you're still having problems, then try to review the following document and let me know how it goes: HP - laptops disable the Fn + combination of function keys on some models

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Logitech k400 touchpad scrolling (and scroll wheel works does not in general)

  I use Firefox Beta 19 for Android on a mini MK808 PC (but this also applies to other devices when using any kind of keyboard/mouse combo external;) I tried also with a Tablet Motorola XOOM 2 Media Edition with similar results).

  My keyboard is a Logitech K400 with a touchpad. It must scroll the page when we slide down/up with two fingers. The feature does not work in Firefox; Instead, I have to hold the mouse button and drag a finger. The gesture of two-finger scrolling works with Chrome and the browser of stock on this device, this issue should be repairable. It's a little annoying because Firefox is differently from other applications.

  In addition, during this test with another real with a mouse wireless keyboard/mouse combo I found that the mouse scroll wheel does not work. Again, it works in Chrome, so it is a behaviour Firefox only. (In fact, it makes perfect sense, because scrolling with two fingers to the keyboard Logitech is to emulate the scroll wheel). This is actually good news, because now I'm sure enough many users will be offended by this bug and it should be fixed.

  Note: in case this information is useful, the scrolling mouse work on Firefox start page with thumbnails of the most used links, but not on the other pages.

  Added: Find the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=686228

  Apparently, there's a difficulty, but when he reached the beta channel?

  Yes! He works in Aurora! Even if for some reason, the logic is opposite to that of Chrome (scrolling down moves the page down in the window instead of the top). I can live with that.

  Edit: well, it works partially in Aurora. Scrolling of the Mouse/touchpad does not work on pages that have fields independently scrollable (for example, the web interface of Tweetdeck with different columns) or the parts that are supposed to be stationary. I hope that (and reverse the direction) will be fixed later.

• Pavilion 6543tx: keyboard and the touchpad works do not after windows 7

  Hello.. I have upgraded to windows 10 days back. But as the cursor froze a lot, I switched to windows 7 today. Now the situation is worse. The touchpad or the keyboard does not work. I tried to connect the keyboard and mouse external, but also those who did not. I am able to connect to windows through fingerpass, but unable to do anything. Please help as soon as POSSIBLE. Thank you!

  HI @Milind_Thakur,

  Thank you for your inquiry.

  I understand that you upgraded to Windows 10, but due to a problem with the cursor freezing frequently, you returned back to Windows 7. Now the touchpad or keyboard to respond. Connect a keyboard and an external mouse also did not work. You are able to log into Windows with your fingerprint, but are still unable to access anything whatsoever.

  I'll try to make a recovery to factory.   Computers HP - performing a recovery of HP (Windows 7) system. If you can not access the Recovery Manager, you will need a recovery media.  If you have not created your recovery discs, please contact HP support to obtain a recovery kit. Please contact HP to Contact HP Supportassistance. If SD not do you a backup before this all started, you will have an option during the recovery to do.  If you need it, here is a link to the computers HP - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

  Please let me know the results.

  Thanks if it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' for my effort help, click on the "Twww.Mountainview.rsb.qc.ca Up" " " give me a Kudos.: catvery-happy. "

• System Restore with the keyboard and the mouse works do not and do not know admin password

  I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
  I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
  When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
  I can't get to the command prompt to display the box to help restore points?

  Hello

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.

  Technical support Gateway

  http://support.gateway.com/us/en/support/default.aspx

  Hope this information helps.

• M4C63UA HP #ABA stream: a pilot missing and 2 devices work does not correctly

  So, I recently switched to Windows (32 bit) 10... My netbook has only 32GBs so I thought that I get more space by using 32-bit and I have a lot more now.
  
  But minor issues however, I can't seem to get the touch screen to work or find the drivers for it.
  
  I also have an invalid driver; PCI encryption/decryption controller.

  

  And I also have two devices in Device Manager when windows cannot load the drivers required.

  

  For my touchpad drivers I don't see whatever it is in devices that I think might be them.

  I appreciate any help on all the above problems although 32-bit is not supported. I imagine that the factory can support 32-bit. I got some updated drivers using the driver easy, but I can't seem to update these drivers.

  Hello:

  This should be the driver that you need for the E/D PCI controller:

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the security features of platform such as Intel Platform Trust Technology (Intel PPT).

  File name: sp72335.exe

  Touchpad:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72339.exe

  Unfortunately, I can't help you with the problem of the touch screen.

  The graphics driver that control it.

  For the other thing of the Intel Atom, please view the hardware ID of the device.

  You can find that by clicking on the watch your screenshot Details tab, select the 3rd item in the drop-down (hardware ID) and after the string of characters that appear in the window.

• SB6141 and Time Capsule works best not Modem?

  I bought an ARRIS / Motorola SB6141 modem yesterday, unfortunately without checking here first of all support and as much I having trouble to get a SB6141 and Time Capsule to cooperate.  The modem works fine with a hard line, but when I plugged in my Time Capsule for the modem I got the dreaded flashing yellow on the TC light. Three hours of reading posts here (and elsewhere) and troubleshooting later and I am still at a loss. Rather than the fight over trying to get the SB6141 to work, I would rather just buy a modem that works (at least mostly) with the TC. I am in the area of Chicago on Comcast. List of approved here modems. Please let me know if you have found a good modem to use with time Capsule. Thanks for any help!

  Additional details - I bought time Capsule 2 TB in March this year and it's all so far (ongoing enforcement, I think, 7.7.3)

  Not on Comcast, but the use of two modems in rotation.

  Zoom 5341J and Netgear CMD31T, who all have both been impeccable since they went into service almost 2 years ago.