Similar Questions

• Why my exported video has black borders?

  Hello world

  Somehow my video must be change sizes or something to that extent. I have thin black borders on my video exported. I checked carefully, and my output parameters and source match my Visual knowledge. Help, please.

  Mike Diaz

  Its media player.

  I just tested it I have the same black bars.

  the taskbar takes place so its not exactly 1920 x 1080.

  Mike: click on the maximize (lower right corner) button or double click in the middle of the media player.

• Video has black screen if I cut.

  Whenever I cut a video clip and remove the other party, my film has a black screen after the 1st game played. How can I fix this.

  For example, my video is 15 minutes. If I cut 3 minutes and make the video, can I get a 15 minute film, where the first 3 minutes are the film and the rest is just a black screen. Im sure you know guys the solution, any help would be great. Thank you

  A picture is attached, as you see the blue line of the video is long, 1 minute, but the rest of the video is 5 minutes long, and the slider bar shows 16 minutes. How can I remove the rest of the clip (the opaque blue bar and the rest of the video)

  

  Basics of EI: the length of your composition determines the length to make unless you set the rendering options to display the work area or a custom length. You can set the work area to the length of a clip from the point of a layer (letter i) and pressing the b button, then will the out of the layer by pressing o and then by pressing the n key, so you can cut your comp to work area by clicking within the area of work and by selecting Trim Comp to work area. You can also set the start and end of a rendering in the render settings or in Adobe Media Encoder.

• Dell XPS 15z 720 p to 1080 p transition L511z

  My situation is Im trying to upgrade my lcd 720 p to 1080 p screen, ive made it work with another computer, an hp without problem, I had to replace the display cable and the lcd screen, now I have a XPS 15z (L511z) it has LCD 720 p with resolution resolution: WXGA and LCD cable which belongs to it (part (: N6MMX). I recently bought an LCD 1080 p which belongs to the 15z (L511z) XPS
  Now the reason im post this is because I know that the part of screen 720 p is N6MMX but im hoping someone will give me a link from where can I get good lcd (video cable) to the 1080 p or part number

  Finally someone has the part number for the LCD 1080 p for the XPS 15z L511z cable?

  This screen appears for a Latitude/precision - not the XPS.

  Apparently, there are two different, incompatible screens between them to 1080 p used in this system-

  B156HW03 V.0

  and

  B156XW03 V.0

  You should probably ask a seller to Dell parts as parts - People.com you need one - it seems that most places sell a full upper set (display, bezel, hinges, cable) for this model - not only the Panel.

• Why my EOS 60 1080 30 fps video freeze and stall when changed in Final Cut Po?

  When editing from my EOS 60 1080 30 fps video on Final heart Pro 7.3 a stop on unwanted image appears at the end of each clip. The video is also difficult to play, often stalling after each change. Generally video is really the struggle against the program, even cleaning. I tried different Final Cut of the Codex and retired the Elgato Turbo video but the problem remains. Of course, there is some sort of sync problem, but I can't find or understand why it is there.

  Thank you

  Clark

  Here: http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_60d#DriversAndSoftware

  Go to the driver & software, choose your version of MAC OS, choose software, download: EOS MOVIE Plugin-E1 for Final Cut Pro 1.4

  It has the manual inside I think. But you can install it, restart your final cut pro and edit your movie. See if it solves your problem. Let us know.

  PS: Here is the Asia of Canon's Quick Start Guide: http://gdlp01.c-wss.com/gds/7/0300004927/03/finalcutpro-plugin-e1-14-e-en.pdf

  Good luck.

• Video has stopped playing and has not saved after alert imessage

  During video recording on my iPad, I received an alert from iMessage.  The video has stopped playing and did not save what has been already registered.

  Is this a normal behavior or y at - it a setting I can change to block all alerts being recorded?

  Thanks in advance.

  Hi sabfa,

  If you do not want to be interrupted when you save the video on your iPad, try to activate do not disturb.

  Use of do not disturb on your iPhone, iPad or iPod touch

  Turn on or off the do not disturb

  When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:

  • Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
  • Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.

  

  Change your settings

  You can also choose if you want to be disturbed:

  • Allow calls to: allow calls from anyone, person, your Favorites or stored on your device or your iCloud account specific contact groups.
  • The calls repeated: If someone calls you twice within three minutes, the call will not be silent.
  • Silence: select silencing calls and notifications always or only when the device is locked.

  Take care

• Air sdk 21.0.0.176 StageVideo/NetStream video has no sound on ios

  When playing StageVideo on an iOS device audio does not play.

  The .ipa is compiled with AIRSDK 21.0.0.176 on mac and the problem did not exist in previous versions. If something has changed in StageVodeo/NetStream in AIRSDK 21?

  I can do a fix 'dirty' playing a sound ordinary-clip, volume 0 value and by stopping immediately after reading, before the beginning of the video. Then the video will play audio as well, otherwise not.

  It seems that build 198 has corrected this... video has now audio on iOS.

• How can I choose the image that will appear as 'image of departure', the one that is displayed when the video has not yet been clicked.

  Hello, I would like to know How to Choose the video image which will be appear in the form " ", "boot image", that image that appears when the video has no was clicked yet.» The image all can see before viewing the video.
  Thank you, Pedro Paulo

  You can change the image poster of clips in the icon view. By default, the first image of a clip appears in the thumbnail viewer and in other places in the Bill where the thumbnail is displayed. You can override the default thumbnail by designating any clip image as a poster frame.

  To set a poster frame for the icon, drag the playback slider or shuttle to the desired image and press the keys command + P (Mac OS) or SHIFT + p (Windows).

• My video is black, as is the input signal, the camera works like the other party can see my photo

  Skype video calling on my video and entering video as black rectangles

  Checked with a one off Youcam program and get a black square too, but the camera works like video caller can see my fine picture.

  Guess that's a direct x issue, made an update of windows, no wizz kids help out me

  Area right but bad parameter, I finsihed changes the tab video, video two and changed its basic color to substitute application settings has been swicthed on and I have swicthed he took. Now works OK

• Lower third of my screen has blacked out. What should I do?

  Lower third of my screen has blacked out. What should I do?

  Hello

  1. what version of Windows is installed on the computer?

  I suggest you try to execute this fixit and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  It will be useful.

• When playing solitaire, video is black with lines and no color.

  Part of the video has changed when I downloaded some updates. It is supposed to be a colored background. But now there is no color, and I don't know where to make these changes. This als happens with other programs like Skype.

  I have no idea what updates you have installed but sometimes
  an updated video driver can be installed that can not be
  also compatible with your particular system like the one that you
  already had.

  It may be interesting to try to do a restore of the system at a time
  before installing updates:

  See the following article:

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It may also be worth a try of going back to the previous
  version of the video driver.

  See the following articles:

  Proceed at your own risk *.

  Windows Vista - restore a driver with its previous version
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-a-driver-to-its-previous-version

  Vista - Device Manager - Roll Back Driver
  http://www.Vistax64.com/tutorials/165382-Device-Manager-roll-back-driver.html

• Export video 4:3 without black borders?

  Hi I have a motion graphic project that will be used with several existing PowerPoint presentations. The PowerPoint presentation is 1024 x 768 (4:3) and so I created a custom in After Effects to match this resolution configuration. When I export the file using Media Encoder (so I save a file WMV) video output file has two black borders. Is it possible to export this video as a line right file 4:3 with black borders?

  

  This looks like some presets of SOUL.  I would check out them.

• Re: Satellite P15-s470: where the video cables (black & white) connect to mobo?

  Hey people,

  I'm trying to back a p15-s470 I came across not assembled.
  I picked up a new motherboard and install and I try to pull up this laptop.

  My problem... where video cables (black and white wires) to connect to the motherboard?
  Which side and where on the plate are taken?
  For the life of me I can't find the connection points.

  Thanks for any help. Very happy.

  Can also meet [email protected] if you might have pictures of places that would help also.

  Hello

  Well buddy laptop disassembly is not really easy it s especially delicate as you already know ;) there are many cables and screws.

  I googled a little bit in the internet and found this picture:
  [Pic1 Satellite P15 | http://www.irisvista.com/tech/laptops/toshiba-satellite-p15/big-mobo/satellite-p15-disassembly-13.jpg]

  I don't know if it will be useful, but it shows the cables that are connected to the mobo m
  Other cables seems belongs to antenna WLan

• Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there. I have windows 7

  Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there.

  I just installed windows 7

  Hello

  ·         What web browser do you use?

  ·         The issue is only with MSN videos?

  Follow these methods and check if that helps.

  Method 1:

  I suggest you install the latest version of Microsoft Silverlight and check if it helps.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• After defragmenting my monitor has black bars across it.

  I recently defragged my system, and now the screen has black bars, run through it.  I tried to update the drivers for my nvidia card, and it has changed nothing.  I also tried restoring system 3 days ago, and it has no effect.

  I restarted after reading your answer, ready to do the repair of the system since the system disk, and it starts without problem.  This is after trying a system restore to a point earlier last night, which does not seem to work at the same time.  Perhaps, she needed another reboot to take?  I'm confused, but relieved that it is resolved.  I don't think that this is malware that I have updated plugins, system and antivirus files.  In addition to the weekly analysis w / MalwareBytes.  Thanks for your reply anyway!