Video has stopped playing and has not saved after alert imessage

Similar Questions

• Windows Media Player stops playing and will not rip

  All of a sudden my windows closed media player just works fine. He'll read that cd is inserted and it will start playing the first song, but after 1 minute and 3 seconds it stops playing and gives me an error of the cd (no cd) is damaged or dirty (BUT I tried two new CD). Also, when I try to rip CDs, it won't work. It tries and then gives errors. I recently got a new driver, and it worked perfectly. I had trouble with my hard drive and had to replace me. This is the first time I tried to use Windows media player to play a cd, since the hard drive replaced and have had these problems. Please please help. I don't know what to do. I works on Windows Vista Edition Home Premium. My computer is up to date on all updates and I'm stumped. Thanks for any help you can provide!

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click Windows Media Player settings

• BlackBerry Smartphones music stops playing and analysis of media after unlocking

  This issue has been addressed in the other two positions, but does not solve the problem of scanning on my "BOLD" or my Curve 8330.

  Current phone is a 9000 "BOLD" through AT & T v4.6.0.167 (Platform 4.0.0.157) running with a 8 GB Micro SDHC.

  I activated the password via the options-> password and lock my phone with the side key or a timeout.

  When I unlock the phone the media application will be to rescan all media files, and if I was playing music the music stops.

  I tried to disconnect the battery when the phone was on, wait a minute and reinsert the battery. By not properly turned off the phone, this resulted in three errors in java.lang after reboot. The icons for SMS/MMS, messages, a personal record and the context was different - it was as if the operating system was not completely initialized. After you restart a second time by the power, cycling, or left alt + right shift + delete, phone recovered to its state before the draw of the battery. I would not recommend pulling the battery on the phone without turning the power off from the first.

  I've always had a disabled content protection. Allowing protection content adds a task of encryption on the phone lock. The first time I activated the content protection that he brought a dialog box after that I locked the phone who said he would take a few minutes to complete the encryption and the phone was insensitive until the task of encryption has been completed. There was also an icon animated animating during the task of encryption.

  I wiped the phone and restored without any change of behavior.

  I switched from Sprint to AT & T because the 8330 did exactly the same thing as above. When I upgraded to "BOLD", I used the same card support for 8 GB of my Curve 8330 with the same data and there is no scanner to unlock until a few days later. I have no explanation why other that upgrading the OS but I don't know how to move to a previous operating system that can solve this problem. I also noticed that since I've updated the operating system, I had a ton of busy icons that appear very often where as before the upgrade I have ever seen one.

  Is this a bug with the latest OS for 9000 on AT & T?

  Anyone know how to fix this?

  I found the solution to my problem. This is a bug in the three versions of the OS, I used.

  The cause is to set Options-> memory-> encryption Mode that uses the password of security as the option.

  Setting Options of-> memory-> cipher any Mode or device will fix the scanning and music to curb the problem to unlock the phone.

  This problem has been me angry too long and I hope this helps other people who were not able to limit.

• USB devices connected through a USB 2.0 Hub Stop Responding and are not recognized after Hub reconnects

  Recently, I have this strange problem where if I connect an additional USB device to one of my USB hubs, some of my devices stop working (especially my keyboard and mouse).

  I have two hubs Generic USB connected to my motherboard. My motherboard is an ASUS Rampage II Extreme X 58 who and chips ICH10. It has 4 USB ports in the front and 6 ports on the rear panel (all USB 2.0). I also have a USB 3 controller card that is connected to one of the PCI-E card to the Board of Directors.  I have the following problems:

  1. Connect a USB device to one of my USB hubs (or one of the USB ports on the front panel) causes some of my devices to stop working (especially my keyboard and mouse that are connected via a USB hub). It seems that crashes of USB controller.  If disconnect and reconnect my HUB, windows does not recognize devices connected to this hub.
  2. Now, after the crash, if unplugging the devices connected to the hub and connect it directly to one of the ports on the front or the back of the computer, Windows instantly recognizes!

  Now I'm confused what is the cause of this problem. I had the same computer since the release of the i7 and X 58 and never had this problem (although I don't remember if I used USB hubs right there).

  Why Windows to recognise the devices connected to the hub at the beginning, but not after the crash?

  Why USB devices stop working when I connect to another USB device on my computer?

  And how do I solve this problem?

  AK

  Just a thought by the way.  If the hubs are not powered you can cause the + 5V due to the excessive number of devices not powered up to a point where it causes accidents and able to resume.

  Reduce the number of UN powered can solve this problem,

• Windows Media Player has stopped playing and ripping of CD

  My Windows Media Player 11 has stopped playing and ripping of CD. I insert the CD, you are prompted to rip, but sometimes even before the CD auto-éjecte without playing or tear. XP OPERATING SYSTEM. Do you want?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  It is possible that your optical drive needs some maintenance or replacement.

• My safari has stopped working and will not charge

  My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

  Try to open Safari in safe mode.  Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible.  Hold down the SHIFT key while clicking on the Safari icon.  If Safari loading, the problem is related to the third-party extensions or plugins.

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

• Delete photos from my camera do not roll after the update to 9.3.1 IOS iphone 4s, also the photo has not saved when taken by camera

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  Mhefzi86 wrote:

  Delete photos from my camera do not roll after the update to 9.3.1 IOS iPhone 4s, also the photo has not saved when taken by camera

  OK, thanks for sharing.

  Maybe you can provide clarification comments on what happens when you try and what troubleshooting steps you did.

• My 6 month Apple Watch stopped charging and will not restart.

  My 6 month Apple Watch stopped charging and will not restart.

  Hello

  Try the following steps:

  Charge your watch about 2.5 hours, making sure you follow the instructions in charge here:

  Check your battery and load your Apple Watch - Apple Support

  After charging, if your watch has not already restarted automatically:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If it still does not start, then try force it restarts again: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

  https://Twitter.com/applesupport

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• Why my internet stops now and then not all the time trying to upload links to pdf files

  I wonder if there is a problem with my computer or if I need to install a program? My internet stops now and then not all the time trying to upload links to pdf files.

  Hello

  1. what browser do you use?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message when internet no longer works?

  4. what exactly you mean by pdf files download links?

  If you use Internet Explorer, you can follow this link:

  Tips for solving problems when Internet Explorer hangs or stops working

  Reference: Cannot display PDFS on the web

  Display PDF files in Internet Explorer, AOL | Acrobat 3D, Acrobat Reader 7 7

  Hope the helps of information.

• CD/DVD does not play and are not read by computer.

  My CD/DVD player will not play and is not displayed in my computer.

  Hi matt256,

  Follow the steps in the link below and check if the problem persists: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD drive has stopped working and now not recognized in 'My Computer'

  I have a HP Pavilion computer to office model a6109n, product number GG038AA, S/N CNH7250K0M. I've been running Windows 7 for 2 years. My CD player recently stopped working. I can't attribute this failure to any specific event that would have led to it.  When a CD is inserted, the green light comes on for about 6 seconds then turns off. The CD player is not long represented on the 'My Computer' to readers list. The CD drive appears in Device Manager. I tried to roload the driver for CD drive, Windows gave a message stating that the best driver is already installed. I have no error message and ran three programs different viruses with no problems. I've also updated Windows available current configuration that has not solved the problem. Thinking it was a hardware problem, I checked the CD drive cable connections and that did not help.  I replaced the CD drive with a new drive for HP and had the same symptoms. I returned the new CD player and he traded for an external CD drive and had the same symptoms in all USB ports. I tried every USB port with a flash player and the flash player saved on my computer in all USB ports. If my CD drive is being recognized by the Device Manager but not in my computer. It's okay if it's an internal or external drive. Everything else on the computer works fine. More troubleshooting ideas?  Thank you.

  Hello

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Check if the drive works now.

  If it still does not work, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K