7358 6280 movement

Similar Questions

• Configuration of the analog output of the controller PCI-7358

  Hello world

  I work with the PCI-7358 during a period of time and now I need to configure the output of the controller for a specific purpose. All I have to do is turn on and turn off the output to an analog 5V DC voltage level. I use a UMI-7774 as a breakthrough. I plugged the IO of 5-8 to the UMI axis MOVEMENT and I hope to get the tension off-axis 1 of the UMI CONTROL block. I use DAC.vi to load to turn on and off this PIN on UMI. When I tried the voltage level was 1.5VDC and it fluctuates so I tried to read the voltage on the PIN and she was 3.2Vac. It was said in this DAC.vi of charge help offset values or front torque limits does not affect the level of tension. I can't understand what is to limit the output voltage level. (I tried the 32000 and-32000 for entry this .vi)

  If anyone can help urgently, I will be grateful...

  Gencer Genç

  Hi Roman,

  in MAX, you must configure the axis as the stepper motors. You don't have to worry about the type of comment. You can leave this set to "encode". You can configure the engines loop Mode step by step in the tab settings of the Stepper to open loop. But in fact your needs, no matter, if you configure open-loop or closed-loop axis. Any mode stepper will be unmap the CAD of the axis.

  In LabVIEW, just use ' configure axis resources "and map of the main output of your axis of stepper output or 'None '. This will also unmap the CAD of the axis. The secondary output must also be mapped to 'None '.

  I hope this helps,

  Jochen

• How to use the two counters to PXI-6280, to read and write at the same time?

  Hi all

  I try to use PXI-6280 counter to generate a command of step motor pulse train.  The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.

  Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.

  Thanks in advance,

  Giavonna

  Electrical engineer

  I'm afraid that I don't understand your idea. Could explain you better?

  Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter).  If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter.  There should be examples in the finder of the example shows how to configure a finished task of digital output.

  Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.

  I don't think not just single point NI the hardware, that's what you want.  More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.

  Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?

  Yes, but it's a little tricky.  You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry.  Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output.  Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal).  When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause.  You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).

  Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here .  It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).

  Is there a way to read pulses them how have been generated, without the other counter, counting impulses?

  N °

  Best regards

• How can I move files/folders to iCloud back to their original finder folder

  I just updated to OS Sierra and noticed that my documents folder was empty. How can I move files/folders to iCloud back to their original finder folder?

  Thank you

  The Duke

  See it - Add your files, Desktop and Documents in iCloud Drive - Apple Support

• "Sit less, move more.

  The new IOS 10.0.2 has modified the application of health by adding a video called "sit less, move more" section of health data. Although I agree with the feeling and I'm even happy to be preached about this TIME, he began to grate. Can I remove or ignore?

  Do not watch the video.  Scroll the screen to see your activity data.

• images don't "move with the text" correctly when I have several columns

  I use 2 columns, have been inserting images in my text and chose 'move with the text' but when I have to go back and fix something, or add text over the images all move and do not stay with the text.  They start on their knees and move to the other columns and will not stay with the text.  In my view, this has to do with the use of columns, does anyone have any suggestions?

  What version explicit pages (Pages: pages) and the Apple logo: about this Mac) operating system version are you using? There are different, a functional version of the Pages that are running on the current releases of OS X and guessing will not help you.

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• How to play movies from memories in pictures for Mac?

  In iOS, there is a button to play movies, memories, but on my Mac, there is no such key.

  Memory starts to play, but is not full screen.

  How to play memory as I can on iOS?

  Also, memories can be shared from my Mac on shared albums and/or sync with my iOS devices?

  Thank you

  Hi Jerry,

  Thanks for posting your questions here in the Community Support from Apple. I see that you are curious about the visualization of your memories on your Mac. I'm happy to help answer your questions.

  It seems that it's not possible to watch movies from memory to a Mac. Take a look at the following information:
  
  

  Memory movies only work on your iPhone, iPad, iPod touch and Apple TV. You will see films of memory on your Mac.

  To answer your question on the sharing of memories, take a look at this information:

  Save and share your favorite memories

  You want to save a memory for later? Scroll down to the bottom of the screen and tap or click Add to favorite memories. You can find it in the album favorite memories from your Photos app. If you decide that you do not want to save a memory, tap or click on remove from favorite memories.

  When you add memory to your Favorites, preserve you and keep to go far when pictures creates new memories.

  You can also share your experiences with family and friends. On your iPhone, iPad or iPod touch, you can share movies of memory as you would share any other video. Read a movie memory, then tap to display the options for editing and sharing. Type and choose to share the movie via E-mail Messages, iCloud, sharing photos, Facebook, YouTube and more.

  On your Mac, you can share photos and videos that are contained in a memory. Click on to share through email, Messages, iCloud, photo sharing, Facebook and other.

  You want to make sure that you follow these steps for memories to be synchronized between your devices:
  
  

  Before you start

  Update your iPhone, iPad or iPod touch iOS 10 or later and your Mac for Sierra macOS or later.

  If you want to get the same memories on all your Apple devices:

  1. ICloud implemented on all your devices.
  2. Connect to iCloud with the same Apple ID on all your devices.
  3. Turn on iCloud photo library on all your devices you want to use with memories.
  4. Update your Apple TV (4th generation) tvOS 10 or later.

  Enjoy your memories in pictures - Apple Support

  See you soon!

• I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

  I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?

  Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

• My downloaded (from iTunes) and bought movie took forever to download and freezes all the time.  How can I stop this?

  My iTunes purchased movie took forever to download, and when I play it, it freezes constantly.  Help!

  Hi there awhitley58,

  If I understand you try to play a movie that you downloaded but it stops time return inconsistent. I would say first to start in safe mode to clear some system-level caches and perform a disk check and repair if necessary:

  Try safe mode if your Mac does not end commissioning

  If not do play correctly, and no other videos you have downloaded in the past are affected, I'd say delete the file and download it again. Thank you for using communities of Apple Support.

• iTunes crashes when I go to play a movie

  When I go to play a movie I bought frm itunes it blocks itunes and back on my desktop?

  Make sure that iTunes is updated on your Mac.

  Get the latest version of iTunes - Apple Support

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Slow movement of the icons of file

  I just upgraded to Sierra and discovered that move file icons became very slow. Whether on the desktop or in a window, I can choose an icon of file instantly, but if I try to move, even a small distance, there is a long pause, and I often get the beach ball, until the icon jumps in position. In this case if I move the couple icon of millimeters right through the window.

  The same thing happens if I move a file between windows. There is a long delay, then a 'Preparing [location] move' dialog box is displayed with a process bar. Another long pause, then a quick movement of the bar and the icon jumps to the new location. Even with a copy operation. Moving to and from the trash by clicking and dragging is also slow. File used for the test was 8 k on disk, 699 bytes of content, is not large files. Movement of file in the trash by command + delete soon also. Open the file information dialog box has been the normal speed.

  I also started having very slow save as... dialog box speeds, slow opening and then slow to fill. The beach ball appeared regularly.

  Any ideas?

  Hello, N.W.J. Hazelton.

  Thank you for using communities Support from Apple.  I see your message that you met some slowness during the management of files on your MacBook Pro, since you upgraded to macOS Sierra.  I know that personally, I want to be able to move, copy, and back up things quickly, without a lot of spinning Rainbow cursor to run, so I can see why you've posted.  I'd be happy to help you.

  When my MacBook behaving this way, I found a System Management Controller (SMC) reset helped.  If you are not familiar with how to do this reset, see the following link:
  Reset the management system (SCM) controller on your Mac.

  If you always see the same behavior after this reset, then start in safe mode can tell you if a program or process could be the cause of the delay.  Follow the instructions here and test your functions copy/move while that started in safe mode: macOS Sierra: start in safe mode

  If your MacBook Pro works fine in safe mode, reboot normally and check to see if the problem has been resolved.

  Have a great rest of your week!

• Is there a way to repair a movie?

  Added a dialog to a movie that was properly recorded in a file previously, but now it won't open. Is there a way to 'fix' a movie?

  I'm not sure I understand. Which, in my opinion, you say that you have added a voice over a clip in your movie and it played ok but after have closed and reopened iMovie movie is fine but voice over does not play. He will play in the project media browser?

• movement 5

  Sorry for my language

  I'm using macos Sierra versie 10.12 with Motion 5 (imac 27 inch end 2012) pro 3.4 GHZ

  But since then a haven, a problem with point 5.2.3

  in the menu windouw, show hud, if I used this, then the window does not appear

  Each the updte everything was normal

  Can you help my

  Thank you

  Start the movement, hold down the command and option keys. In the window that appears, select Delete preferences. See if that helps.