7510 photosmart all-in-one does not connect

Similar Questions

• HP Photosmart C7180 all in one: does not connect

  Help!

  My C7180 All In One Wireless printer won't connect, I trouble shoot error code: 0x803C010B rises.

  This printer is 9 years old.

  Its been having problems printing as point by point when I copy it scans then prints point by point. However, when I printed a downloaded doc it would be normal printing. But now it won't connect to my laptop or my desktop Dell all-in-one wireless.

  Any help is appreciated.

  Hello

  Thanks for the comments.

  Glad to hear it works now.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• HP2510 all-in-one does not connect reliable over my ADSL line when sending faxes.

  It initiates the transmission, hear the answer tone (s), said his connection, but expires.  Sometimes it works and it used to work reliably.  I can pick up the phone and say his attempts to define the flow of data, but it rarely connects.  Any ideas?  And by the way, I am move to the connection of the FO U-verse in two weeks.

  Hello

  The fundamental problem is that we not send sensitive data on the internet which is not when in time sensitive.

  When the hissing analogue sounds translate into packets of data to the internet, they can not arrive and be decoded amount from time to time the fax is now.  When the fax speed is set to a lower setting, increase of time allowed for the other fax answer.

  Here is a document that accompanies this step to change the transmission speed when SENDING a fax.  If you have any problems with reception, try to change speeds anyway, but you may need to ask the sender of the fax speed on the sent fax.

  http://support.HP.com/us-en/document/c00302247

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• (GET MORE) On a printer C309n Hp Photosmart Premium Web application does not connect to the internet?

  Hello everyone; Does anyone know why the app GET MORE on this printer Hp Photosmart Premium Web C309n does not connect to the internet? All other applications are connected ok. The site is down? someone knows something about it? HP is the fixation of this hopefully soon? Thanks for any info.

  I am very sorry for your difficulties.

  You can try the following, if you please, of your printer face:

  Setup (wrench on sceen House of printer)

  Web

  Updates

  Product updates

  Accept the update of product offered.

  Please let us know:

  (1) if he is offered an update of product, and if so, it ends correctly?

  (2) receives more work after the update?

  In the future you can keep your FW up-to-date more easily by selecting the option 'Automatically' for the settings of update of product in the update section of the product in the Web menu.

  Key

  Web

  Updates

  Product update settings

  Select "automatically".

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• photosmart HP b210a more does not connect to the server.

  I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

  Technical specification:

  iMac running Lion

  Mac Book under Snow Leopard

  iPad

  iPhone 3 g

  AT & T Uverse router

  Thanks to anyone who can help!

  The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

• 7510 photosmart e-all-in-one does not print

  I had setting successful place Photosmart e-all-in-one printer 7510 when I bought first. Super easy to install and I print wireless all the time.

  I recently moved and tried to uninstall and reinstall the printer so that I could print wireless again. I did exactly the same thing to install because I did the first time and it doesn't work. I went through all the steps help and may not know what the problem is.

  1. the printer is turned on.

  2. the printer is certainly connected to the network. No problem found on the wireless network test.

  3. my computer is not connected to a virtual private network.

  4. the computer and the printer are on the same network. Name of the network on the wireless network test is the same name of network connected to my computer.

  5. There is no firewall does not block the detection of the printer.

  6. the wireless router is not in a bad state of operation. If it were, I would not be able to get online, right?

  7. I do not use the 'connect a new printer' resettlement.

  8. I don't know that I downloaded the appropriate software drivers.

  I don't know what else to check. The only thing that has changed is the router and the internet provider. I got the same laptop before I move. Everything works fine print/scan when connected via a USB port.

  You're not the only one having problems with the SBG6580.

  Your internet provider has other available modems?  (not motorola)

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• Photosmart premium 3-all-in-one does not print black ink

  My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

  Under Tools, I see only "Clean cartridges" not "clean print head."

  When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

  Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

  Thank you once again!

• HP Photosmart C3180 all-in-One does not scroll on glossy photo paper

  Printer all-in-one HP C 3180 will not take paper glossy photo Copier. I hear the gears rolling, but it doesn't pull in the worksheet. It will take regular paper and Matt paper thick. I use only HP advanced photo copy paper. Are there adjustments for scrolling? Any help would be appreciated.

  I was able to identify the problem and solve it somewhat. Settings of the printers were very good; no paper jam, etc.  It is the rear access door.

  Glossy paper would not scroll until I pushed on the RAD. I just have to hold it down until the paper begins to scroll, so I withdraw my hand. Find out where the problem is I should be able to jimmy-rig it (ahh... Yes, duct tape!) to hold in the FDR. Nevertheless, Cheetah12, I appreciate your suggestions.

  alpha2566

• HP photosmart c6180 all-in-one: does not print because some cartridges are empty

  I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

  Hello

  To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

  Kind regards.

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!