783c, Pavilion, original configuration

Similar Questions

• How can I reset my original Photosmart HP 6520 to its original configuration?

  How can I reset my original Photosmart HP 6520 to its original configuration?

  Hello

  Please follow the steps below.

  Setup menu > tools > restore default settings

• Pavilion p100dx: need to HARD disk for my pavilion p100dx configuration

  Hello team,

  Recently my hard drive of the laptop broke and now I need to replace my hard drive P100DX Pavilion.

  To do this, I want to know the configuration of HARD disk as

  1. 2.5 or 3.5
  2. What is SATA or SATA-no?
  3. SATA is compatible for it?
  4. What is the size of the HARD drive that needs to be? -height, length and width.
  5. Seagate HARD drive would be compatible.
  6. pointers for the HARD drive to buy.

  Thanks in advance.

  Hello

  It's a laptop HP Pavilion 15-p100dx ?

  http://support.HP.com/au-en/document/c04463224

  If Yes, then

  1. it uses standard 2.5 "HDD.

  2. it is a SATA HDD,

  3 SATA III (or 3) and SATA II (or 2) is compatible.

  4. all standard HDD laptops would use the same width and length, thickness (hright) can be varry slightly, but your laptop supports 7 mm or 9.5 mm. Better use 9.5 mm because you don't need a frame fill to increase his height.

  5. Yes, HP doesn't produce HARD drives for laptops, it uses Seagate, Toshiba and a few other brands.

  6. you can buy in any computer store BestBuy or Amazon, Newegg...

  Kind regards.

• Pavilion dv7 VM23UA #ABA: different Pavilion dv7 configuration of manual

  I have a Pavilion dv7 notebook, model dv7 - 3063cl, SN: [Personal information deleted], produced VM23UA #ABA nr.  I try to open the housing using the dv7 manual and configuration covers and parts, the locations are different from what is in the manual.  Does anyone know if there is a manual of different maintenance, both of which are available on the HP support Web site?

  Hi @jamoro ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Pavilion dv7 - 3063cl Entertainment Notebook and have them remove the case. Here is a link to the manual of your product. Don't know what part you try to remove it.

  Thank you.

• I lost Windows Vista on Satellite Pro U400 - how to get the original configuration

  All;

  I missed upwards at the start of my new laptop... I fail to use Vista.
  So I used the system recovery DVD. a version of Xp installation crashed the Vista partition!

  How can I get the original installation of this machine...?

  Any help is welcome...

  Kind regards...

  Hello

  Try with https://backupmedia.toshiba.eu/landing.aspx

  Good bye

• I have a laptop of logic that is running windows vista, I want to restore it original configuration

  I have a laptop running windows vista logiq, I would like to restore it to factory settings, I can't find if I had any disk when I wore this last year, it contains errors which I can't fix so thought I would restore it back to original settins, can anyone help

  Hi shelaneboon,

  What exactly is the problem that you are facing?

  If you want to restore your laptop to factory settings Windows Vista, then you need to contact the manufacturer of the computer for more support.

  Note: If you you restore the computer back to the factory settings, you will lose all data. Back up your data before you restore your computer to factory settings.

• After the installation of the driver software my windows 2008 Server gives a blue screen. How can I go bak to original configuration?

  I get a blue screen after installing the drivers for my TM-T88IV from the internet. So I now can't log on because of the blue screen.
  How to return to the original state.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Windows Server général assistnce more far.

• Capacity of data store poster now much smaller than the original configuration

  Hi all

  I have my new configuration of server DELL R710 - 2 x 146 GB drives in the server on a RAID 1, connected to an MD1000 with 10x146GB in a RAID 10 SAS drives, and 5 x 750 GB SAS drives in a RAID 5.  My controllers RAID show each virtual table as you would expect to see the ability, however, VMware now shows my RAID 5 744 GB data store, instead of the 2.5 to he showed last night!  My VM on this data store seems solid, but I have no idea where my ability went.   I'm under ESXi 4 - free Version.

  What can I do to recover this loss of capacity?

  ESX (i) has a limit of 2 TB LUN and with ESXi you end up with the rest of storage after have been subtracted portions of 2 TB (i.e. TB 4.7 LUN donnerait.7 TB of storage (4: 7 - 2.0 - 2.0)).  With most of the controllers, you can create multiple LUNS on the same disks that you can use the complete storage if you create 2-Bay RAID 5 on the 750 GB drives.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Satellite L450D-11V - how to restore the original configuration?

  I have a Toshiba Satellite L450D-11V and need to know how to restore it back to factory settings.
  I tried F1 and F8.
  Please can someone help me?

  Hello sammi

  Yes, we can help you, but you should also use more than one phrase to describe your problem.
  No one knows what OS you are currently using.
  Do you use BONES that you got with your laptop?
  Have you changed the structure of partitions?
  You have created recovery DVD?
  Is the installation of HARD drive recovery work if your laptop is always the factory settings.

  When you press F8 at startup you can enter advanced startup options?
  Repair my computer option is listed here?

• HPPhotosmart 6520: How to reset my photosmart 6520 to its original original configuration?

  Hello, your problem go to: Setup menu > tools > restore default settings.

  I can not even the "Setup menu" on my screen of the printer HP6520.  What I have is the icon of parameters, which is a key, and then when I press on that I get to a screen that has 'Tools' option.  Then when I press on the tools, I get another menu, none say "Restore default settings".  The options are: estimated ink levels, printing situation report, print quality and printhead clean.

  Where I'm going wrong?

  Hi @jmac8,

  You are in the right place, there are 3 other options on the Tools menu, you see not;

  1. Align the printer
  2. Restore the default settings
  3. Demo mode

  After the cleaning print head option, you should be able to go to the next page of the tools. To scroll, press the right side of the touch screen and drag your finger to the left.

  I hope this solves your request!

• About the origin/Edge configuration

  Hello, I'm quite new to Adobe Flash Media Server and have been reading administration guide.

  After reading the information of origin/edge here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  I came across a few questions.

  1. it is said that edge server essentially act as a "proxy" gets all inbound connections, which redirects them to the originating server.

  But I read here:

  leader = 00000130.html & http://livedocs.adobe.com/fms/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDoc s_Parts

  that basically just edge transport server uses 1 connection initially and ordered that all users who connect. I am an old user of shoutcast/icecast, and this terminology is a little different. Origin/Edge configuration is basically correct relay? An edge transport server relays a stream from the origin server, and ordered everyone still correct?

  So I might have a relatively low origin server and low bandwidth and have 3 edge server to connect to the origin and have about 100 users to connect to each server 3 edge?

  2. This is the question that that concern me the most. Currently I have swf and HTML field restriction to my application on the original server. If I set up an edge transport server it will respect safety (html and swf domain restrictions) set to the correct home server? Or should I re-enter the areas these 2 files on the edge transport server?

  3. when I completely setup my origin/edge servers, will still be able to connect to the origin? Or they will have access on board?

  4. is there a way to limit the number of users connected to a server and after that it caps out, every future connection is then sent to another edge transport server?

  We hope to hear for you guys.

  Thank you!

  It is not that we do not know, is that we have not gotten here yet.

  1. edge/origin does many things.  It is a complete solution or a simple approximation.  Edge tries to take as much load to the server of origin as possible, therefore he handles VOD delivery locally if the media is cached, distributes broadcasts by pulling only once, but redisting, and it multiplexes all incoming connections on the edge more than one (actually two, but that's a minor detail) to the origin by the remote application conveyed. Origin must manage all scripts, is the authority on the content and registration or the Summit meeting point in direct topologies.  If you have a low origin?  Probably not because he is will again fill media content, especially at the beginning, when the caches are empty, constly.  If you run the script, happens to process the script for all customers, including those on the edges, so that can be costly - should be a great machine?  probably not - when caches work correctly, you should see limited on the origin, etc. support.

  2 edge transport server has its own independent area restrictions.  They are not provided to original aboard.  Allows you to create an origin configuration where it accepts that the edges or other machines in your domain and you can target other areas by the edge transport server.  So, if you want them all in honor of these settings, you'll want to change it on all configurations.

  3. an origin server can always handle direct traffic with or without subscription the edges.  I'll make sure that you are up-to-date with the latest version of FMS, especially 3.5.3 when it comes out that we have fixed some bugs in our DVR implementation in this area.  Nothing catastrophic, just want to ensure that you have the version that works best and we are considered correction of problems loading strongly edge based both local basic traffic (especially in a network of 3 level or more, but you're not here)

  4. you can write like this logic in an access adapter - actually it is exactly what it is designed for.  There the number of connections - for the server and the command of redirection at your disposal so write some logic there please.

  ASA

• Upgrading the BIOS. Mobo ASUS P5LP - THE. BIOS of PHX. Tech. of ver.3.16. Pavilion a1620n. Win 7OS.

  I have a Hp Pavilion a1620n with a motherboard ASUS P5LP - THE using Phoenix Technologies Bios VER.3.16 and running Windows 7. I want to upgrade the processor and said that I have to upgrade the Bios before upgrading the processor. I have been researching but can't find any info on how to do it for this particular machine. There is no on-board Bios Flash program and I can't seem to find any information. Any ideas?

  AZ_scuba_dude, welcome to the forum.

  There is no update software/BIOS for Win7 for the computer.  It is unlikely that there will be a developed.  However, there is a BIOS update for XP.  You will need to do a system restore to the original configuration that includes XP.  Once this operation is complete, you can update the BIOS to version: 3.19.  You can do the update using the executable file (sp35100.exe). Although she did not mention anything about what makes the upgrade of the processor.  Here are the Specifications of the motherboard of the computer.  In the processor upgrade information section, it lists the updates that supports HP.

  Please let us know if this solved your problem or not.

• Pavilion a6220n: updated my BIOS after Windows 7 is already installed

  Hello.

  I bought an a6220n Pavilion in 2008 because he was very progressive.  In 2010, I updated the video card with an ATI Radeon 4770 and upgraded to 4 GB of RAM.

  Recently, I backed up all my stuff and restored the computer to factory settings.  I installed 8 GB of RAM. Then I started Windows 7-64 bits of an installation disc.

  So now Windows 7-64 bit is up and running.  I think so.  Internet seems to be very slow.   It recognizes the 8 GB of RAM and video card, video card driver, and other system drivers are up to date.

  I want to spend my CPU to a Core 2 Duo E8600 3.33 Ghz, but in order to do this, I'll probably have to update my BIOS.   But when I try to update my BIOS Installer tells me this:

  _______________________________________________________________________________________________

  Title: IPIBL - LA motherboard BIOS update
  Version: 5.13
  Description: BIOS card mother IPIBL - update improves compatibility with the memory test.
  Aim: Routine
  Category: BIOS
  
  Operating system:
  Microsoft Windows Vista Home Basic (32 bit)
  Microsoft Windows Vista Home Basic (64-bit)
  Microsoft Windows Vista Home Premium (32 bit)
  Microsoft Windows Vista Home Premium (64-bit)
  Microsoft Windows Vista Business (32 bit)
  Microsoft Windows Vista Business (64 bit)
  Microsoft Windows Vista Ultimate (32 bit)
  Microsoft Windows Vista Ultimate (64-bit)
  Microsoft Windows Vista Starter
  
  Language (s):
  Global English
  
  Improvements/corrections:
  -CPU microcode updates.
  -Reduced the Intel Quad Core CPU ACPI S3 Resume BiosInitTime.
  -Adjust the low limit speed system fan.
  -Fixed a problem with system suspended when selecting "after the failure of AC power" in the BIOS Setup Menu.
  -Improves compatibility with the memory test.
  
  Prerequisites:
  -You must be logged in as an administrator to install this update.
  -You must have a Microsoft Windows Vista operating system.
  -You must have a motherboard IPIBL - LA.

  _______________________________________________________________________________________________

  While this means?  I need to restore to Windows Vista, upgrade the BIOS and then install on Windows 7?

  Or is the BIOS of Windows 7-compatible Windows Vista?  If this is not the case, where can I get the version of Windows 7?

  Jj3down, welcome to the forum.

  You can only update the BIOS to the operating system that came with the computer.  In your case, Vista.  This means that you need to perform a system recovery to return the computer to its original configuration.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to burn a music CD in a PC HP Pavilion 500 model - 205-t

  My PH Pavilion PC came with a DVD burner. But, I want to burn audio CDs I can do with my original configuration (that is, DVD burner) or if a change is necessary?  If so, what should do?   Can I just download a CD burner app or a change in equipment?

  Hello

  Optical drive should certainly be able to burn CDs without modification.  If you want to check, you can visualize all the multimedia capabilities of your optical drive using the free app at the following link.

  http://www.VSO-Software.fr/products/Inspector/Inspector.php

  An example of free software you can use to burn CDs would be ImgBurn.

  A link to direct download for this software is here.

  Kind regards

  DP - K

• Pavilion dv6-6b54sl: ID of the laptop failure

  Hello, I have a laptop HP Pavilion dv6-6b54sl, product number: A6P10EA #ABZ.   OS = Windows 7 64 bit.

  My question is: laptop stops working, more than 1 time. Reboot the system, then it seems normal.

  I just restored original configuration. But not resolved.

  So I did the HP diagnostic test: test running and break-in failed.

  Starting test report:

  Memory test passed; =

  Smart check = passed;

  Short-DST = failure;

  Failure ID = mc0c6w-5rt7g2-qfph4k-60xh03

  Could someone explain to me?

  Hello

  Yes, hard drives, I linked in my previous post works perfectly - you are not limited in any way that the manufacturer of the drive.

  Kind regards

  DP - K