8.1 Windows Installer hp 6520

Similar Questions

• Can I do a repair disk for my 10 boot camp windows installation?

  I installed boot camp using the boot camp assistant and not from my own installation disc.  It is provided in the boot camp assistant.  Sometimes I can't start windows and getting a bad_pool_header error.  I am asked to insert an ERD.  How can I make or get a repair disc?  When I open windows and try to make one, I am informed that I can not with this version of windows 10.

  There is no repair under OS X disk to repair Windows. You must use your Windows installation for this disc. Or find a Windows program for such a purpose.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• The installation failed because the Windows Installer is underway

  I try to install Gmail voice and video chat on my HPTouchsmart and get this error "failed to install because Windows Setup is in progress. Please wait for installers to complete, close all Windows Installer... "But I do not want to install anything else.  Anyone know how to fix this?  I had time to settle down before, but can't remember how I got around it (I remember it was a chore).

  No, no process of Setup running, it's the annoying part.  It is apparently a known issue with Vista.  The solution below is annoying, but came from HP and the only one that I know that works:

• NB100-10 X Windows Installation

  I bought 2 Netbooks NB100. (Ubuntu) Now, I want to install winxp. I used a DVD. external Windows installation has started...--> bluescreen. I used a bootable USB key. Windows Setup-> blue screen. Other Versions of win the same thing. Another DVD - ROM... Similarly. Who is wrong? o.o

  I erased the 0 sector a formatted hard drive with bartpe. But it's the same thing... win2k does not work, too.

  nowt I build the hard drive out and formatted it outside with my laptop, now the installation from the cd works

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• iMac 2015 Unable to Boot Camp and Windows Installer

  I've been back and forth with a Service guy to customers by phone, but thought I'd throw so the question in the case to see if there were others who have experienced similar problems and might be able to help.

  I have an iMac, retina 5K, 27 - in, end of 2014. It allows to launch the Boot Camp with Windows 8.1, which I put in place about 1 year ago. It worked very well. But then, I decided to try to upgrade to Windows 10 about 3 weeks, which is not well. Decided to erase the partition via the wizard Boot Camp and re - install from scratch.

  Now, I can not install Windows at all. I've tried everything. Using another ISO downloaded from the Windows website. Check disks using first aid. Last night I even totally erased the readers (via the terminal in recovery mode, with the help of the man of CS) and made a "Reinstall internet" of the operating system and then tried in boot camp. Without success.

  I tried to call Microsoft too, but their position on the whole thing is "this is on a Mac, this is the problem to Apple. Bye. »

  Appearances, Assistant Boot Camp is successfully created a partition. The system resets the Windows installation each time and I spend the flow rate of the installation until I get to the section "where you want to install Windows? I select my Bootcamp partition, format and then click Next. That's when I get the error message "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  If I quit the installer and restart on the side OSX, I see that the new partitions is to Windows NTFS, so it seems ok. I am completely puzzled and frustrated as * at this stage.

  Any thoughts? Ideas? Help? Please?

  Data sheet:

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz of Intel Core i7 processor

  16GB 1600 MHz DDR3 memory

  AMD Radeon R9M295X graphics 4096 MB

  What are the external devices connected to the iMac during the installation of Windows?

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows Installer tries to install the smart web printing

  Hello

  Whenever I click on my computer to open a folder or the Start button, windows installer is trying to install the smart web printing and I get a message error everytime. I have to manually close the window every time.

  I tried to remove the smart web printing from the Control Panel, but it did not work. I also tried to install the new version of the smart web printing and unstall, but it did not work.

  How can I solve this problem? I want to stop windows install tries to install smart web printing every time I open a folder.

  I have Windows 7.

  Thank you very much.

  Mary

  Hello

  Finally I found a way to solve this problem. I typed msconfig in 'run' and not all the HP Smartweb printing and windows elements installer in the startup and services tabs. I have no more problem.

  But thank you very much for your help!

• Is it possible to convert the recovery CD into Windows installation CD?

  Hello

  I bought a laptop satellite and partitioned the hard drive!

  The problem now is that if I want to install windows mce 2005 again the reovery cd deletes all information of hard disk partition!

  My question is: is it possible to convert the toshiba recovery cd/DVDs in a normal working windows installation cd?

  Or is it possible to extract the image (.tpa /.000.001.002,.003,.004) files so that I can easily burn it to cd and copy the files extracted to the hard drive?

  I hope someone can help me!

  THX

  Chris

  Hello

  Something like that is not possible. On the recovery of the media it is an image that cannot be split. As far as I know with CD recovery facilities, it is possible to install the OS on the first partition (if several available). You can also create own partitions.

  Please carefully check the menu at the beginning of the procedure of collection facilities.

• Windows 8 "the Windows Installer Service can access."

  Dear Skype community support,

  Skype does not allow you to connect more, but requires to download the latest version.

  Instead of installing the new version, Skype corrupts Windows Installer and it hides in the services.msc list and generates the error message: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Please contact support for assistance.

  Please provide a way to install Skype and repair Windows Installer

  Thank you in advance.

  More details here.

  http://download.bleepingcomputer.com/win-services/7/msiserver.reg

  Found. This .reg file reinstalls Windows Installer missing and at least for my computer fixed the issue. Hope this helps you as well.

• Re: Satellite L500 - Temro number - package error 1722 Windows Installer

  Hello, I bought Toshiba L500 in January, but I could not update with Tempro since May. Towards the end of the installation, the Setup program crashes and it says the following in Turkish:

  "Hata 1722. Drinking Windows Installer paketi Island boğulma bir sorun var. Kurulumun bir fates? CAL olarak? a beklendi program? I have gibi sonlanmad?. Destek sorumlunuza veya paket sat? c? s? BA na? vurun. »

  If I translate briefly, it

  "Error 1722. There is a problem with the Windows Installer package. The programme of work as part of the installation has not finished as expected. Applies to your seller of service or support package.

  I have download the Tempro installation file, but whenever I start the installation program, it always says. How can I update my laptop?
  Thank you for your interest and responses.

  Hello

  If the error 1722, this means that a program run as part of the Setup did not finish as expected
  Please see the new version of Tempro here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/TEMPRO_W7_RELEASE/

  I installed Tempro and is worked so I guess that it s a problem with your Windows operating system.

• Windows Installer / not found boot device

  Hey

  I have HP pavilion

  model: e0z59ea #abt

  I tried to install linux (ubuntu) on USB, but it 'clear' my coumputer

  I get a maasage to install oprating system on my hard drive.

  (hard disk 3F0)

  I am looking for the installation cd but I remember that I do not understand in the shop.

  where can I get the windows installation 8 for my coumputer?

  I another laptap in the past, the virus clear the windows, byt I get the installation CD and solve my problem

  Hello

  Thanks for posting in the HP Support forum.

  Nowadays, most (if not all) laptops do not come with recovery media (CD/DVD, etc...)

  Computers are equipped with discs hard (or SSD) that contains the two operating system (primary partition) and hidden recovery partition. Users can boot from these recovery (instead of primary) partitions and restore the default settings (for example in the infection by the virus or if corruption of Windows).  The user can also use the built-in software and can make a backup of recovery (on DVD or USB key). Here is just one example of how this can be done:

  http://www.YouTube.com/watch?v=bfn1IGP-TWC

  Unfortunately, as you install another operating system (Linux-based) and that you have formatted the drive HARD/partitions, these partitions of recovery very probably are no longer present. In this case, you can take the path of the long (er). You need to buy HP recovery for your computer media.

  http://support.HP.com/us-en/document/c03833718

  Please, contact the nearest HP Office-> http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  and ask the agent (via call phone/chat/email) to guide the recovery disc for your computer purchase. They are generally cheap and arrive quickly on.

  Once you receive a recovery media (DVD), follow these instructions to recover your machine with Windows 8:

  http://support.HP.com/us-en/document/c03489643

  Choose->

  Grab your laptop of HP-> restore recovery disks

  Please, let me know if I can help you further.