8 GB or 4 GB max? (HP G62-a15SA)

Similar Questions

• BD - ROM external on laptop HP G62-a15SA?

  Hello!

  I bought this laptop a few months ago...

  Laptop HP G62-a15SA

  Could I plug...

  BD - ROM external

  .. .and watch Blu - Ray movies on this laptop model?

  I like to play online games via the HDMI output on the ATI on my LG 42 '' Plasma TV (720i). Would be over the moon if I could watch Blu - Ray movies too

  Thanks in advance for your time.

  Dean

  PS. If Miss me a thing and there is an internal HP available for this model drive then please let me know!

  OK, did some research AMD Athlon II Dual - Core P320 has no problem reading blu ray and Yes, I suggest to uninstall the existing Cyberlink software and to install the Cyberlink software that comes with external optical driver...

• G62 A35ER: memory RAM Max for G62 a35er

  Hi, in the manual for my a35er G62 (http://h10032.www1.hp.com/ctg/Manual/c02542102) says that it can to support up to 8 GB of memory RAM, but the supported higher in the manual configuration is 2x2gb (4 GB).

  How can I know what kind of config my phone supports? (2 x 4 GB - 8 GB total / 2x8GB - 16GB total)

  Right in the manual, the bottom of page 1:

  Supports up to 8 GB of memory system

  Example configurations that they give the list just means that it has been sold, so apparently it was sold only with up to 4 GB of memory, but can use and accept 8 GB (2 x 4).

  This is the memory class module:

  4 GB (only for model 1.1) 599092-001

  https://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1468495663&SR=8-1&keywords=599092-001

  For the 1st generation Intel Core laptop computers, it is important that you use low density 8 black blocks by memory side only.

• My memory works ok? (Additional JEDEC listed)

  Additional JEDEC #6?

  I bought this 2 GB of http://tinyurl.com/2urvxgl key to upgrade my laptop to 4 GB. Because I mix I wanted to make sure that all manufacturers (Micron & Samsung) is very well by running CPUz diagnostics and noticed that Micron module has an additional entry in the JEDEC timing Table (it lists JEDEC #6 10.0 - 10-10-28-38 761 MHz) I also noticed the Micron stick seems to have a different number of chips on the stick of RAM too compared to the Samsung RAM.
   
  -Is this normal? -Do you think I'm getting double channel of this mix of manufacturers?
  I guess the worst case scenario is to order another Micron 2 GB stick so that I have identical, but all pairs seems OK so far.
  Model of laptop: HP G62-a15SA

  Please see below for info extracted by CPUz memory:
  Chipset
  -------------------------------------------------------------------------
  Northbridge AMD 785GX Rev. 00
  AMD Rev SB800 southbridge. 40
  Type of DDR3 memory
  Memory size 4096 MB
  Double channels, (Unganged)
  Frequency 532,5 MHz (3:8) memory
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Cycle time of Bank (tRC) 27
  Control rate (CR) 1 t
  Uncore frequency 1597,4 MHz
  Memory SPD
  -------------------------------------------------------------------------
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Micron (2 00000000000000) Technology
  Size 2048 MB
  Bandwidth Max PC3-10700 (667 MHz)
  Part number 8JSF25664HZ-1G4D1
  Serial number 3116004D
  Date 29/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 5.0 - 5-5-14-19 @ 380 MHz
  JEDEC #2 6.0 - 6-6-17-23 @ 457 MHz
  JEDEC #3 7, 0-7-7-20-27 @ 533 MHz
  JEDEC #4 8, 0-8-8-22-30 MHz 609
  JEDEC #5 9.0 - 9-9-25-34 @ 685 MHz
  JEDEC #6 10.0 - 10-10-28-38 761 MHz

  DIMM # 2
  SMBus address 0 x 51
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE00000000000000)
  Size 2048 MB
  Bandwidth Max PC3-10700 (667 MHz)
  M471B5673FH0-CH9 part number
  Serial number 78FDDF59
  Date 14/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 5.0 - 5-5-14-19 @ 380 MHz
  JEDEC #2 6.0 - 6-6-17-23 @ 457 MHz
  JEDEC #3 7, 0-7-7-20-27 @ 533 MHz
  JEDEC #4 8, 0-8-8-22-30 MHz 609
  JEDEC #5 9.0 - 9-9-25-34 @ 685 MHz

  Studio_Muppet wrote:

  

  Hi erico!

  I thank you for your reply, noted that the SPD does not give abilities - having a JEDEC extra listed on my new stick of RAM and not the other question? It does not matter. Those are the timings primary, secondary and tension that a BIOS can use to automatically set the memory at FSB speeds.

  Also, I noticed a change in the frequency of frequency & DRAM NB when comparing the original configuration of 3 GB for my new 4 GB configuration: old Vs new Config

  

  Is this normal?

  The speed of the memory takes by default the slowest speed. Consider yourself lucky that it starts in Windows. Most do not have that kind of luck and is frustrated to have the new memory that does not work in their notebooks.

  Sorry for my lack of knowledge, I want to be sure I'm not compromising performance by mixing RAM from different manufacturers. If additional memory is slower than the original memory then you have slowed the operations of memory and essentially lost some performance. I see it running in dual channel. It's a surprise. Lucky you!

  Best regards

  ERICO

• HP G62-b51SI: Max Ram in a laptop HP G62 b51SI

  Nice day

  I would like to know what is the max Ram I can update in my laptop HP G62-b51SI?

  At the moment I have 2x2gig of Ram. When I insirted 2x4gig ram, the laptop wouldn't start.

  The problem with that is that if it has a global maximum of 4 concerts there also a max per slot of 2 GB. So, theoretically a 4 GB does not work in a slot, if max is really 4 gigs. If 4 GB works when it is installed by itself, then we can have a bad location or a problem of bad module. This seems like an extreme long shot, but what you have to lose by trying?

• HP G62 Max Ram?

  Hi guys,.

  I have a small question. I have a HP G62 and im happy with my laptop, but there are 1 it's a pain in my eye;

  The graphics card.

  I read that if I put more RAM in my laptop I could use more MB of my graphic card which is ~ 68-128 MB

  I checked the HP website for more details and my G62 MAX 8 GB of RAM support

  Here is the link

  My question is whether it is true that my laptop can really supports 8GB!

  And what DDR3 RAM is supported

  Thanks, Murat

  Hi, Murat:

  Here is the service manual for your laptop:

  http://h10032.www1.HP.com/CTG/manual/c02542455.PDF

  Info upgrade memory are in Chapter 1, page 1-1.

  You can install 2 x 4 GB of PC3-8500 (1066 MHz) memory.

  Paul

• Max Memory 4GB or 8GB G62 - B10SD?

  Hello

  For my studies, I bought a laptop G62-B10SD about a month ago. In the new project, we started, we need to virtualize servers. Currently, my laptop works with 4 GB of memory. It is not enough to run several servers at the same time.

  I want to upgrade my laptop to 8 GB memory. HP said that my laptop can support a maximum of 4 GB. But some memory company sells 8 GB for my laptop. Is it possible to extend the max memory you accepted in my notebook?

  I really need the memory to work on my homework.

  Thanks in advance,

  Jeroen

  Your laptop supports up to 8 GB of memory system... Specifications memory would be DDR3 1066 MHz

• Taken Max memory supported by HP G62-b50SQ.

  Hello.

  4 months ago I needed a laptop, and my choice was HP G62-b50sq. I am happy with my choice, but it came with only 3 GB of memory, and it is simply not enough for me.

  I read a lot of reviews and specifications of this particular configuration, and in each of them, he says that the accepted maximum memory is 4 GB. Here's the question: why? The processor P6100, then it has a controller integrated DDR3-1066 memory and it supports 8 GB of RAM, so why this particular cell takes in charge only half? Or there is not enough physical space for double side slots inside to adapt?

  Thank you.

  Specifications:

  HP G62-b50sq

  Intel P6100 @ 2.00GHz

  3 GB DDR3 - 1066

  ATi Radeon 5470 512 MB DDR3

  Seagate 500 GB HARD drive

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02542102.PDF

  There is conflicting info on the product specifications page and the service manual.

  State of care product max is 4 GB.

  Service manual says max is 8 GB (2 x 4 GB).

  My advice:

  Download and run the free memory Crucial Analyzer.  That will tell you how much memory you can install on your laptop.

  http://www.crucial.com/systemscanner/

  I'm sure he'll come back and tell you that you can install 8 GB.

  If for some unforeseen reason it does not work, then you can still play and buy a 4 GB chip and install it and see what happens.

  Chips 4 GB DDR3 are not too expensive (under $ 20.00).

  Paul

• Example: G62 Notebook PC: Max RAM

  My name is HP G62 Notebook PC Core I3

  My type of system is 64-bit, 64-bit operating system

  My window is Windows 10 pro

  the question is: if my laptop can be upgraded to 8 g. Ram or not?

  Hello Ahmed,.

  This is the information you request.

  Supports up to 8 GB of memory system

  Supports dual channel DDR3 1066 MHz memory

  In this case, it supports 8 GB of ram, but you must have 2 modules of 4 GB each on DDR3

  Please let me know if you need something else.

  Concerning

• Max supported ram for laptop HP G62?

  Hoow much HP G62 B37SO supports maximum RAM memory. Now, I have 4 GB.

  Product number: LD215EAWuuW

  The system board ID: 143 c

  AMD Phenom II N830 2.1 GHz Prosessor

  F.2A BIOS

  System boad CT number P BKJN B5 7V ZP 4M 4

  Hello
  
  4 GB is the MAXIMUM.
  
  http://support.HP.com/us-en/document/c02636045
  
  Concerning

• Upgrade of Ram G62-b95EV

  Hello.

  I own a laptop G62-b95EV. It came with 4 GB of RAM, and I wonder if it is possible to upgrade to 8 GB.

  The manual says 4 GB MAX, but I don't know if it's for the total or per slot.

  http://support.HP.com/us-en/document/c02621611

  Thanks in advance

  Hello

  Your device supports up to 8 GB RAM. Check page # 1 on the link below

  http://h10032.www1.HP.com/CTG/manual/c02542102.PDF

• I think to upgr hp g62-a21sa with i3 330 m processor. What kind of Proccesor I can adapt

  My laptop has become slow a little, I need to upgrade the processor and memory. What kind of Proccesor I can adapt and what is the maximum memory ram can I use

  card mother model1439 60.22 chipset havendale/clarkdale southbrigde hm55

  Here are the specifications of your computer laptop g62-a21sa and here's the HP G62 Maintenance and Service of Guide series. Looks like the processor i7 - 620 M of Intel Arrandale™ (total 2.66 GHz, 4 MB L3 cache, 1066 MHz) - Dual core 35watts CPU and memory twin 4 GB (2 x 2 GB) DDR3 1066 MHz SODIMM memory are at the max. However, the service guide also States in "Supports up to 8 GB of memory system"

  Frank

• HP G62-340US: it will be useful to upgrade my CPU?

  I recently bought 8 GB of RAM and an SSD of high quality for my 6 year old HP G62-340US, but the computer feels not as fast it should with these updates. I have an AMD 2.2 Ghz processor, but the CPU still seems to be maxing out, even at startup. This doesn't seem right, so I ask you:

  Is this old CPU slow down my computer?
  If this is the case, is it possible to upgrade my CPU to something newer and fastest?

  JGSaunders

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on performance issues and wanted to help.

  To start, you can see if anything in this post help with performance problems: HP PCs - increase the performance system and maintenance of your computer (Windows 10) | HP® customer support

  IF that is not the case, then you are against some serious limitations.

  First of all, your PC did not come with preinstalled Win10, so I think that you have gone to Win10 of Win7, right?

  Sorry to be the bearer of bad news, but the problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.

  This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!

  Secondly, you have installed Win10 32 bit, so you wasted your money by buying this memory.  The 32-bit Windows operating system are limited by the policy of using only a little more than 3.2 GB of memory, regardless of the amount of memory you have in the machine.  There are hacks which allow you to use ALL your memory, but those who violate the license agreement with MS, so we does not allow to refer to them.

  -------------------------------------------------

  One possibility, if you want to go to the trouble, is to do a clean installation of Win10 by using media, created using this link: install Windows 10 using the tool of creation of media - Windows help

  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT.  If you do, the media that results will be different and will force you to enter a NEW product code.

  Once you have that media, you start from it and install Win10 on top of what you have now.  However, you will lose all settings, configurations, and applications in the process.  So reinstall applications, this is what is required if you go down this road.

  However, I did this on an HP DV6 laptop and since then he is working very well!

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP g62-226nr

  Hey help me I want to improve my hp g62-226nr cpu, graphics card and ram.

  Can someone help me I have a pentium and 4 GB of ram.

  I put an i3 or i5 on it and what is the ram limit.

  BTW, my motherboard number is 616449-001.

  Help, please

  Hello

  To answer your questions in order:

  1. there is a list of compatible processors on Page 91 of your & Maintenance Guide.  I always recommend to check with HP, once you have made your choice, as errors in the list have been known.

  2 video chip is integrated into your motherboard, and is not an evolutionary element.

  3 max Ram is 8 GB - IE the Modules of DDR3 2 x 4 GB - see Page 54 of your & Maintenance Guide.

  Kind regards

  DP - K

• What RAM is "HP G62-B53SE" supports?

  Hi all

  I have a? HP G62-B53SE.

  you said in the specifications that you provided here sepe

  --------------------------------------------------------------------

  | Memory: 4 GB DDR3 (2 x 2048 MB) |

  --------------------------------------------------------

  | Max Memory: Supports up to 4 GB memory DDR3 |

  --------------------------------------------------------

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c02542102.PDF

  Chapter 1, pages 1 and 2 provide supported memory configurations.

  They have left out the 2 x 4 GB and 1 x 4 and 1 x 6 GB configuration, but as you can see on page 1, the laptop supports up to 8 GB memory.