8 windows multiple BSOD errors
I had a HARD drive on my system to Windows 7. I wanted to install a SSD and move to Windows 8. I bought a Samsung EVO 250 GB Solid State Drive and have had any other problems with Windows 8. I can still update Windows without having a BSOD. Here is a list of the BSOD errors I received in 24 hours:
PAGE_FAULT_IN_NONPAGED_AREA (Ntfs.sys) (fltmgr.sys)
DRIVER_IRQL_NOT_LESS_OR_EQUAL (dxgmms1.sys) (nvlddmkm.sys)
System_service_exception (no data) (nvlddmkm.sys)
Each parenthesis is a different phenomenon and there are many others. I don't know if it's my real SSD which is a failure or if the controller is not compatible with Windows 8, or if any other piece of hardware is not. I tried updating, deleting, adding updates, firmware and drivers and nothing is.
Tags: Windows
Similar Questions
-
"Windows 7 x 64 BSOD error" BCCode: 3B.
Hey guys. I just started using this new laptop and did a few mines gold intensive CPU with it.
My laptop in general is idling at 140 degrees F but it seems to hold up. These blue screens seem to happen at random times while botting, usually 6 to 12 hours in it.
I recently installed Windows 7 Ultimate on this disc have previously windows 8. This laptop really doesn't have a lot of programs too, I just have the basics and use it for heavy agriculture.
BSOD error
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033More information about the problem:
BCCode: 3B
BCP1: 00000000C 0000005
BCP2: FFFFF960001D07AB
BCP3: FFFFF8800BFDB1B0
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0Product: 256_1
Thanks for reading
First step is to upgrade to Service Pack 1. In itself, that can solve the problem. If she does not see below
Service pack 1 update.http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
Additional resources:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
http://Windows.Microsoft.com/troubleshootwindows7sp1These accidents were related to the corruption of memory (probably caused by a driver).If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here) -
Windows 7 BSOD and receiver code error BCCode: 9f
Original title: Windows 7 BSODHey guys I just built my first system and it was a lot. I used the trial version of Windows 8 64-bit for about a week I had to wait for my windows 7 to arrive. Windows 8 everything went fine with no problems. Then I installed windows 7 and ever since then, every time I leave my system alone for an hour or two, I'll be back to see that it crashed because of this error message below. Can I use my computer all day, video, editing, etc, but when I close all and leave for an hour, I'll be back to see that I have broke down. I try to leave it overnight to install my steam on games but crashes after about an hour.Any help would be great.Error message:Signature of the problem:Problem event name: BlueScreenOS version: 6.1.7601.2.1.0.256.48Locale ID: 1033More information about the problem:BCCode: 9fBCP1: 0000000000000003BCP2: FFFFFA80070A4A10BCP3: FFFFF800047C43D8BCP4: FFFFFA80097AB010OS version: 6_1_7601Service Pack: 1_0Product: 256_1Files helping to describe the problem:C:\Windows\Minidump\122112-20077-01.dmpC:\Users\Ryan\AppData\Local\Temp\WER-58203-0.SysData.XMLRead our privacy statement online:http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:C:\Windows\system32\en-US\erofflps.txtData sheet:Intel i5 3570 k @3.4 ghzCooler Master Hyper 212 EvoZ77 UD5H Gigabyte motherboardEVGA Gtx 670 FTWCorsair Vengeance 8 GB 1600Corsair HX 750w PSUSeagate Barracuda 7200 rpm 1 TBCooler Master Storm StrykerEdit: I thought it might have something to do with memory, so I ran Memtest 86 + 4 hours and had no error: PHello
Thanks for posting your query in Microsoft Community!
According to the description, you are receiving BSOD (Blue Screen of Death) and receive the error code BCCode: 9f.
To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:
Did you do changes on the computer before the show?
I suggest to follow the steps of the items listed below and check if it works.
Error message when you try to resume a Windows 7 or Windows Server 2008 R2 to Hibernate computer-based: "Stop 0x0000009F"
http://support.Microsoft.com/kb/977186
Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".
http://support.Microsoft.com/kb/975599
stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/981848
Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Hello
These days I often BSOD error ' DRIVER_IRQL_NOT LESS OR EQUAL (tcpip.sys) and even I am unable to copy or zip the dump file, it saying: access denied.»
Please help me
Hello
To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.
If you do not know where. The DMP files, here's how to get to them are:
1. go to the folder % systemroot%\Minidump.
2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
-If she always says that you have not the permission, you must Take Ownership- http://www.eightforums.com/tutorials/2814-take-ownership-add-context-menu-Windows-8-a.html
3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.
4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..
If you plan to use Onedrive but don't know how to download it, please see the following:
Download pictures and files to Onedrive.
Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.
If your computer does. DMP files, follow these steps:
1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.
2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."
3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.
Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.
4. ensure that viewers is ENABLED:
Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.
If you can not get into normal mode to do this, please do so via Safe Mode.
Kind regards
Patrick
Thank you very much for your help...
I found the reason why is because of Anti-Malware software and I uninstalled that. All is well now
-
Windows BSOD error 8 "Bad Pool Caller."
Original title: Windows 8 BSOD
Dear Windows people
I got the dreaded Blue Screen of Death on my laptop Acer Aspire E1 - 750 cheap but good mood who gave error code 'Bad Pool Header', then 'Bad Pool Caller'. He couldn't get past this screen at start up. Using Windows 8.0, no devices (in fact, I was trying to plug a Kobo in the USB port, and does not recognize him, he was charging, led me to restart the laptop, to achieve the above error messages.
Very surprised because it is relatively new, and the previous Amilo (Windows XP) I had, had 8 years of operation without BSOD.
The files don't the zip.
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.We prefer at least 2 DMP files to track trends and to confirm the cause.
Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at hereIf you have any questions regarding the procedure, please ask -
Satellite L850 - 1 P 9 - Windows 8 critical Error athwx *.
Hello
recently, I bought a new laptop, a Satellite L850-1, P 9.
The first week of using the laptop never showed signs of Ant problems, but in the last 3 days I get a BSOD that stops at the laptop.
Before closing, I have thus written in a document of something like this "athwx_8". I read that this kind of error is related to the software that can be installed.
The software that I use now is the same that I used on my old laptop, it may be that something related to driver software.
Here is a link from which grab the windows event viewer: [errors found | http://sdrv.ms/1a0q3e6]
Hello
I recommend you to reset the laptop back to factory settings.
Let's hope it's just a software problem that could be solved by the system recovery.Don't know how to do this?
If this is not the case, check this useful document from Toshiba:[Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]
You should choose the option * reset your PC *.
This would remove and reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a pure installation of Windows 8, or the default configuration of OEM factory, depending on the medium used for the operation.Any comments would be greatly appreciated
-
Windows Server 2003 - Error Codes: 0X800706BE & 0X800706BA
I have a server with Windows Server 2003 Enterprise Edition custom which is made of multiple system errors of Windows Update Agent with ID 20.
Here are some examples:
Installation failure: Windows failed to install the following update with error 0x800706be: update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168).
Installation failure: Windows failed to install the following update with error 0x800706ba: Security Update for Windows Server 2003 (KB979683).
In addition, there are 20 twenty updates that produce the total failure of the installation with the 0x800706ba error. The first installation of .NET framework 3.5 SP1 error is the only one with error 0x800706be.
To resolve this problem, I did the following:
Stop the automatic updates service, renamed Software Distribution files in C:\WINDOWS and C:\WINDOWS\system32, and then restarted again the automatic updates service.
The same problem occurred (updates will download, but not with the error ID 20 system event) and so I did the same steps again and also reinstated the SOOPER services:
1. run "gpupdate/force".
2. run "/detectnow wuauclt.
And once again, downloaded updates, but not settle and the recorded errors.
What else can I try to get these updates installed?
If the computer, in fact, update through Windows Update, post it here instead: http://social.technet.microsoft.com/Forums/en/winserversecurity/threads
If, however, it updates via WSUS, post here: http://social.technet.microsoft.com/Forums/en/winserverwsus/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Displaying the right information to get a BSOD error help
When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.
Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.
What's not?
Where is the problem isolated to?
Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.
There are more important questions that you can answer that will help your troubleshoot BSOD error message.
- What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
- What is your version of Windows and the Service pack?
- Are you running a 64 bit or 32 bit OS?
- What is your Internet browser and version?
- Does your system use IDE or SATA disk drives?
- What virus protection software and current malicious software do you use? Is up to date?
- The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
- What has changed recently?
- Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.
Here is a list of the most common mistakes of the BSOD you can see
- Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
- Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
- Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
- Stop 0 x 00000023 FAT_FILE_SYSTEM
- Stop 0 x 00000024 NTFS_FILE_SYSTEM
- Stop 0x0000002E DATA_BUS_ERROR
- Stop 0x0000003F NO_MORE_SYSTEM_PTES
- Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
- Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
- Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
- Stop 0 x 00000073 CONFIG_LIST_FAILED
- Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
- Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
- Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
- Stop 0 × 00000079 MISMATCHED_HAL
- Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
- STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
- Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
- Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
- Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
- Stop 0x0000009C MACHINE_CHECK_EXCEPTION
- STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
- Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
- Stop 0x000000C2 BAD_POOL_CALLER
- Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
- Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
- Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
- Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
- STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
- Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
- Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
- Stop 0x000000DA SYSTEM_PTE_MISUSE
- STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
- Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
- Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
- Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
- Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
- STOP 0x000000FE BUGCODE_USB_DRIVER
- Stop 0xC0000218 UNKNOWN_HARD_ERROR
- STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
- Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
- STOP 0xC0000244 STATUS_AUDIT_FAILED
This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.
While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.
If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.
-
BSOD errors, seeking help narrowing of the cause
A quick overview - I've been "gifted" a site with about 250PCs to manage. From the beginning of the contract (before my time), they have random BSOD errors and a few other programs that I am trying to sort now that I'm responsible for everything.
The issue is that when the user to log in and begin to open programs, or sometimes during the initial connection, the system will blue screen and they reboot. To restart the system in general will allow them to connect you and start working. Other times it can happen 2 - 3 times before the system decides to cooperate.
I started the collection of mini dumps memory.dmp and msinfo for systems after sorting what I could of BSOD Viewer (which only the States, it's a question about memory, but all searches are futile determine exactly what the cause.)
Here is a link to the 2 systems, that I'm watching, hoping someone can do the same a fraction of light to help solve this problem. Users have dealt the question, at least 1-2 years, I've been here since February and I'm about to start pulling my hair (what little I have excluded).
Thank you all!
fffff880 '066 d 3398 fffff880' 04c 48130 * ERROR: Module load completed but symbols could not be loaded for mfeaack.sys
mfeaack + 0 x 48130fffff880 '066cde68 fffff880' 01151c4a * ERROR: symbol file could not be found. Defaulted to export symbols for mfehidk.sys-
mfehidk + 0x68c4aMcAfee and graphics card intel are mentioned in the two systems. I suggest you uninstall mcafee and running the tool of cleaning, found in the link below.
Recommended methods of removal of Windows: Windows 7
Download the tool Development http://us.McAfee.com/apps/SupportTools/MCPR/MCPR.asp
If you continue to have problems after you remove Mcafee, uninstall and reinstall your driver intel graphics.
-
BSOD error: IRQL GT ZERO at THE SERVICE of the SYSTEM
Hello
I have known many BSOD errors since last year. I tried to install a new copy of Windows, but the problem is still going.
I read some responses who blame Bitdefender here, but I want to confirm by sending my dumpfiles before complaining to them, can you help me?
I also read something related to this on Bitdefender forum http://forum.bitdefender.com/lofiversion/index.php/t48376.html, but I think that's exactly my problem. However, I installed the patch mentioned, but still have not tested its effectiveness... Could this hotfix (http://support.microsoft.com/kb/2664888) solve my problem?
Here is the link to my dump files and msinfo32: http://www.4shared.com/rar/J0al3nomba/Minidump.html
Thank you in advance.
Renato Rigotto.
Hello Renato.
Thank you for the update on the issue and if problem continues try to follow these methods and check if it helps.
Method 1:
Select last good known in Windows Advanced options and check if that helps. To do this, restart the computer and press the F8 key for about four to five times. You will see the that last known good Configuration in the advanced options of windows. Please select last known good Configuration and then press enter.
http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration
Method 2:
You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.
To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.
See this link to start your computer in Advanced startup options.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Method 3:
I suggest to follow the steps described in the article and check if this can help resolve the issue:
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
BSOD error - included file link
Hello, I never tried to fix a BSoD for me so hoping that I can get through it.
Here is the link to my Minidump and MSinfo32 files - https://onedrive.live.com/redir?resid=903F8B851E866942! 5988 & authkey =! AH-5Enin745phQ8 & ithint = the file % 2czip
I use a desktop with Windows 7 Asus computer. PC configuration very standard which belongs to non-technical brother and I use it for the basic work of small business 2 days a week. The only changes that I made recently are to renew my Kaspersky Internet Security license.
For the past 2 weeks I got a BSoD error once per day. There is no consistency in what I'm doing at the time of the error, time of day etc that I've been able to think.
Any help is appreciated with gratitude. If there is more information, I can provide to help determine the problem, please let me know.
Fiona
Fiona
These accidents were related to the corruption of memory (probably caused by Kaspersky).Please run these tests to check your memory and find which driver is causing the problem.
If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
Since then, it is more likely to be a pilot run everything first.1-Driver Verifier (for full instructions, see our wiki here)
If the auditor does not have the issue we move to it.2-Memtest. (You can learn more about running memtest here)
If you cannot start after you have enabled the auditor reboot in safe modeIn Vista & win 7 (F8)
Co-written by JMH3143.
-
Hey all,.
I have several BSOD errors. I reinstalled win 7 after having a BSOD error different loading windows. I did the format of the hard drive, so it must be cool.
I have updated all the drivers, including the BIOS. Any help is appreciated because I'm banging my head on the wall here :)
Crash dump directory: C:\Windows\Minidump
Dumps are enabled on your computer.
Wednesday, September 17, 2014 21:03:57 this computer crashed
crash dump file: C:\Windows\Minidump\091714-35646-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 21:03:57 this computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002CBA22B, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 7:58:58 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\091714-38984-02.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Verification of error code: 0 x 18 (0xFFFFFA800A2BA2B0, 0 x 0, 4 x 0, 0xFFFFFFFFFFFFFFFF)
Error: REFERENCE_BY_POINTER
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that the reference of an object count is illegal for the current state of the object.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 17:26:14 CEST your computer crashed
crash dump file: C:\Windows\Minidump\091714-58141-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA8008A24BB0, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 17:20:10 CEST your computer crashed
crash dump file: C:\Windows\Minidump\091714-39780-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA0000, 0xFFFFF80002C5622B, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 17:16:05 CEST your computer crashed
crash dump file: C:\Windows\Minidump\091714-38984-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80081DCBB0, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, September 17, 2014 4:10:54 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\091714-36114-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Verification of error code: 0 x 50 (0x0, 0xFFFFF80002D1236E, 0xFFFFF8A003BCB000, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that invalid system memory was referenced.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.10:35:38 AM GMT on Wednesday, September 17, 2014 crashed your computer
crash dump file: C:\Windows\Minidump\091714-42837-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFA8000, 0xFFFFFA80080FDBB0, 0x0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Not a problem, thanks.
KMODE_EXCEPTION_NOT_HANDLED (1e)
This indicates that a kernel-mode program generated an exception which did not catch the error handler.
Bugcheck 1E, {ffffffffc0000005, fffff80002cba22b, 0, fffa0000}
0: kd > fffff80002cba22b ln
(fffff800'02cba1ec) nt! RtlImageNtHeaderEx + 0x3f | (fffff800'02 ca 9108) nt! MiDoReplacementThe exception is produced in nt! RtlImageNtHeaderEx + 0x3f.
---------------------------
1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm
Very annoying software, so please uninstall ASAP!
2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:
MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
3 navigate to services.msc and disable the nVidia Streaming Service card and then restart the computer.
Kind regards
Patrick
-
Windows 7 BSOD when changing between LAN and Wifi network
I have users to get BSODs during network between LAN and Wifi. There is not much information in the dump file.
Any idea what could be causing this BSOD, and what can be done to correct?
I can send the dump file if anyone is interested in looking at.
Thank you
Manish
Hello
1st thing I would do is update the card interface (wired) NETWORK and WiFI (wireless) drivers.
Suspect also any 3rd party antivirus. Uninstall it and use MSE - free at least test.
List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146MSE - free
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201============================================================
Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
second or so time of the BSOD to provide more information as possible
cause: see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
BSOD error 1033 whenever I play Diablo 3
Hello
I met a BSOD error 1033 recently, every time I play Diablo 3. The game starts up and crashes the minutes a bit and my computer restarts automatically. Most of the time, I have to restart a couple of times before that my computer can even switch to secure mode.
Here is more information about the error. I don't know how to post the 2 files mentioned below in this forum and would appreciate any help as walked me.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033More information about the problem:
BCCode: 116
BCP1: 8634 008
BCP2: 93984C7A
BCP3: C000009A
BCP4: 00000004
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\101613-22713-01.dmp
C:\Users\Jarren\AppData\Local\Temp\WER-38298-0.SysData.XMLThank you for your help.
JT
99% of the time error 116 comes from heat. If yours is a laptop that is almost certainly. It isn't RAM (although it can be the video ram), it could also be power.
Update for win 7 64 bit will not solve this
-
Working on the computer of a friend which triggers a BSOD BAD_POOL_CALLER at startup, tries to repair itself, fails and then goes into a reboot loop. The computer will boot into safe mode with network however.
Unfortunately, I am unable to download debugging took from the Windows SDK for a reason, below error
= Recording started: 21/01/2015-16:51:08 Build type: SHIP UNICODE 5.00.9200.00 appeal process: C:\Users\User\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\2RH9JZEM\sdksetup.exe =.
MSI (c) (05:00) [16:51:08:346]: Resetting cached policy values
MSI (c) (05:00) [16:51:08:346]: value of strategy Machine 'Debug' is 0
MSI (c) (05:00) [16:51:08:346]: * RunEngine:
Product: C:\ProgramData\Package-x86_en-us.msi Cache\{9274C832-3D8A-A294-FDE8-8B9272357098}v8.100.25984\Installers\SDK debuggers
Action:
Command line:
MSI (c) (05:00) [16:51:08:346]: Client and UI is none or basic: full installation running on the server.
MSI (c) (05:00) [16:51:08:346]: grabbed execution mutex.
MSI (c) (05:00) [16:51:08:346]: unable to connect to the server. Error: 0x8007043CMSI (c) (05:00) [16:51:08:346]: Note: 1: 2774 2: 0x8007043C
1: 2774-2: 0x8007043C
MSI (c) (05:00) [16:51:08:346]: unable to connect to the server.
MSI (c) (05:00) [16:51:08:346]: MainEngineThread returns 1601
= Recording stopped: 2015/01/21 16:51:08 =.I am a voluntary Peace Corps working in southern Africa and the internet leaves a lot to be desired (but hey, I internet!) and I just hope to get this BSOD error resolved for my colleague. Here is the link to my .dmp file
Thank you for your time.
OD
first of all, you need to update to win 8.1 * this might solve the problem but if you can not it was related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation I remove the current driver and install the latest driver available.
Maybe you are looking for
-
Time Machine - how to restore the files it deleted?
I used Time Machine to restore your desktop earlier. In doing so he erased the current Office - which I had not saved. I know, I know. But is it possible to get the most recent desktop and its folders and files again?
-
Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU
I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beep
-
Error of vi-1074395247 IMAQ learn model 2.
Hello Development environment: LabVIEW 2012 32-bit (12.0f3) Vision 2012 Description: Can someone please shed some light on what types of descriptors of the KING are allowed for IMAQ learn ringtone 2?. Only certain KING types allowed for this VI, or y
-
I forgot my admin password, now I carnt change like thers no link to fgot password?
-
Filling of the specific category of Signal on the range of functions
Hello Does anyone can help with advice on how to complete the specific category of signal on the palette of functions of block diagram? Thank you