8 Windows BSOD WHEA_UNCORRECTABLE_ERROR

Similar Questions

• Windows BSOD error 8

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error has occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 holds the address of the
  WHEA_ERROR_RECORD structure that describes the error conditon.
  Arguments:
  Arg1: 0000000000000000, Machine Check Exception
  Arg2: fffffa80059cb028, Address of the WHEA_ERROR_RECORD structure.
  Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
  Arg4: 0000000000010019, Low order 32-bits of the MCi_STATUS value.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  BUGCHECK_STR:  0x124_GenuineIntel
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  
  PROCESS_NAME:  chrome.exe
  
  CURRENT_IRQL:  f
  
  STACK_TEXT:
  fffff880`0148b868 fffff802`31e3e965 : 00000000`00000124 00000000`00000000 fffffa80`059cb028 00000000`b2000000 : nt!KeBugCheckEx
  fffff880`0148b870 fffff802`31fddeb3 : 00000000`00000001 fffffa80`042a7850 00000000`00000000 fffffa80`059cb028 : hal!HalBugCheckSystem+0xf9
  fffff880`0148b8b0 fffff802`31e3e703 : 00000000`00000728 00000000`00000003 fffff880`0148ba10 fffffa80`042a7850 : nt!WheaReportHwError+0x253
  fffff880`0148b910 fffff802`31e3e020 : 00000000`00000010 fffffa80`042a7850 fffff880`0148bac8 fffffa80`042a7850 : hal!HalpMcaReportError+0x53
  fffff880`0148ba70 fffff802`31e3df1b : fffffa80`0435fd50 00000000`00000001 00000000`00000003 00000000`00000000 : hal!HalpMceHandlerCore+0xd4
  fffff880`0148bac0 fffff802`31e3dd78 : 00000000`00000004 00000000`00000001 00000000`00000000 00000000`00000000 : hal!HalpMceHandler+0xe3
  fffff880`0148bb00 fffff802`31e3ef0f : fffffa80`0435fd50 fffff880`0148bd30 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0xd4
  fffff880`0148bb30 fffff802`31ed577b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
  fffff880`0148bb60 fffff802`31ed552e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7b
  fffff880`0148bca0 00000000`647109db : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x16e
  00000000`0727ede0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x647109db
  
  STACK_COMMAND:  kb
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: GenuineIntel
  
  IMAGE_NAME:  GenuineIntel
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  0
  
  FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  Followup: MachineOwner
  

  SR

  This is called a BCC124 and is linked to the material.  Since "genuine Intel" is referenced in your, I would run a cpu stress test.

  

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Problem Pro P300 running Windows BSOD 10 satellite on inserting USB

  I have a beloved P300 of 2009 happily running on Windows 10 except for the fact that whenever I insert a USB key into one of the USB ports, I get the blue screen of WIndows 10 (very friendly) and the computer restarts giving REFERENCE_BY_POINTER error code. Strangely, mouse USB and USB cable to the printer do not cause the same problem (printer and mouse work perfectly). Something not just with the feature id plug & play USB, so my first thoughts were to the BIOS and updated the BIOS from the original CD (2009) - maybe a BIOS up to date would be available? Any suggestions are welcome.

  SOLVED - have solved the BSOD on inserting the USB and post it here for anyone else who has the problem - good for the BSOD problems. I solved it by watching the minidump files (go to C: > Windows > Minimdump) and their reading with my event - FREE to http://www.nirsoft.net/utils/my_event_viewer.htmldownload viewer Nirsoft. When the computer has BSOD had a minidump (.dmp) file is created and the drive of NirSoft helps you make sense. In my case it was Roxio Easy CD creator, which was causing the problem. Remove Roxio and everything was fine. Update Windows normal 10, this anomaly would have been found, but you cannot move to 10 Windows XP so my Windows 10 is a clean install. I hope this helps.

• Update Windows BSOD

  I am a user of Windows XP Pro and so far has been affected by the problem of Windows Update BSOD even if I got my updates on. This brings me to the question, why this issue affects users of Windows XP and not others?

  Does anyone know?

  Some users of Windows XP have infested computers hijackware. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows BSOD 10 memory management issues aspire FIH57

  Hello

  I have upgraded from Windows 7 to Windows 10 recently and have met various BSOD problems. Generally, it would be a warning on the Page of corrupt of defective material but sometimes he also gave errors IRQL not less or equal. I have been in contact with Microsoft and you have run various bugfixes including troubleshooting to fix/update all drivers, sfc/scannow & dism.exe/online/cleanup-image /restorehealth where no error has been detected.

  Today, I got a new error when the computer crashed, namely a memory management error.

  I ran Windows Memory Diagnostic that has reported the following:

  Your computer has a memory problem

  Memory problems can cause the computer to lose information or stop working. To identify and fix the problem, contact the manufacturer of the computer.

  Did somebody encountered this problem before, and if so, what is the next step?

  Any help would be appreciated.

  Thank you!

  99% a bad ram module.

  If your system has 2 ram module, you can try to start with a single and made a windows memory test and see who we have problems.

• Constant BSOD, "WHEA_UNCORRECTABLE_ERROR."

  Hey guys,.

  Lately, my computer has been crashing all playing games on it and I do not know what to do. The time that I am able to use my computer before it crashes varies, but it tends to occur more quickly on most demanding games. For example, I could play Dark Souls 2 for a few hours and be well, while it will crash within 20 minutes on GTA V. I don't know what the problem is and was hoping that someone can help you. Here's the info from my last BSOD:

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA800EA68638
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  I used WhoCrashed trying to find out what the problem was, and he told me that ntoskrnl.exe broke and WHEA_UNCORRECTABLE_ERROR was the error.

  If we need more information, let me know what you need and how to get it!

  MU

  The results tend to point to the CPU, but it could also be the heat, POWER or else block.  It's probably the processor but I would continue to do other tests to eliminate other things as the source of the problem.

• XPS 15 (9550) Windows BSOD 10 DRIVER_CORRUPTED_EXPOOL

  I have experience at least one daily BSOD on my new Dell XPS 15 (9550) running Windows 10.  DRIVER_CORRUPTED_EXPOOL.  Ntoskrnl.exe + 151d0

  You have updated to the latest version of the BIOS? Yes.

  Your drivers are up to date?  Yes.

  Are you running the driver version 1.1 for the SSD is Samsung?  Yes

  Do you use UEFI in AHCI mode?  Yes

  You have reloaded your operating system from scratch?  Yes.

  I'm curious to know after you have reinstalled Windows, how long to wait before installing programs or drivers, just to let the system run Windows only and see if you still receive the error?  I'm almost tempted to suggest working with the system in SafeMode overnight and check in the morning to see if there are blue screens.

  I could check the resource monitor and see if all programs stand using an abnormal amount of system resources, open Task Manager (press the windows with the x button, choose Task Manager) click on the performance tab and then click the resource monitor button. You can see at a glance which fits CPU, memory, disk and network resources and maybe get a hint about what is at the origin of the problem.

  I you will be shooting a friendship, with the erratic error request so I'm careful about suggesting replacements of parts, but if the problem persists, it may be something to consider.

  TB

• Windows BSOD 8: System Service Exception - tcpip.sys

  Hello

  I got a new laptop for Christmas and updated to Windows 8. There has already been some hissing adjustments with me. A few days ago I tried to update the OS (continued to come with the update failed) unsuccessfully until today where I got it working after leaving it while I was at school. This has been the most recent installation, I know, and it has been fine for the last time to date. He can't go 3 minutes without a BSOD.
  The error message I get is: System Service Exception - tcpip.sys.
  Any contributions to this issue would be appreciated
  Thank you
  Owen

  Owen

  This single DMP has been altered, so I can't give you definitive information yet.  Often when crashing in tcpip.sys, it's due to malware, or real malware application installed.  I would like to delete bitdefender and replace it with MSE (at least for testing).  It's a PNP (plug and Play) device just not sure what atm.

  You have also some old drivers that need updating.  If you continue to plant please download each of them.
  Update of these (if available)
  
  mwlPSDVDisk.sys Fri Mar 25 03:12:23 2011 (4D8C4057)
  EgisTec Inc. digital fingerprint biometrics.
  http://www.carrona.org/drivers/driver.php?id=mwlPSDVDisk.sys
   
  irstrtdv.sys Wednesday, June 15 at 14:52:49 2011 (4DF8FF81)
  QuickStart storage technology driver Intel®
  http://www.carrona.org/drivers/driver.php?id=irstrtdv.sys
   
  k57nd60a.sys Wed Oct 19 16:17:36 2011 (4E9F3060)
  Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
  http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys
   
  NSNetmon.sys Thu Nov 8 16:29:32 2011 (4EB99F3C)
  Pilot NovaShield Kernel network Module that is believed to be a part of BullGuard Internet Security
  http://www.carrona.org/drivers/driver.php?id=NSNetmon.sys
   
  NSKernel.sys Thu Nov 8 16:29:41 2011 (4EB99F45)
  Pilot of the kernel Module of NovaShield is believed to be a part of BullGuard Internet Security
  http://www.carrona.org/drivers/driver.php?id=NSKernel.sys
   
  HECIx64.sys Wednesday Nov 9, 19:52:25 2011 (4EBB2049)
  Intel Management Engine Interface
  http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
   
  iaStor.sys kills Nov 29 22:39:19 2011 (4ED5A567)
  Intel storage drivers
  http://www.carrona.org/drivers/driver.php?id=iastor.sys
   
  IntcDAud.sys Tue Dec 6 06:23:07 2011 (4EDDFB1B)
  Intel Graphics Media Accelerator HD driver
  http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys

• Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040

  Hello world

  I had reinstall Windows 8 last month cause too many errors with the Windows 8 and I had still BOSD arrives with a new installation of Windows 8.

  The last that I have no will is this one:

  KERNEL_DATA_INPAGE_ERROR

  Ntoskrnl.exe + 7 has 040

  We arrive in surfing on the web and burning with IMGBURN. Many Disconnections occur when you use the dvd burner.

  The other at the moment that I solved is "atikmpag.sys" I read on the net that I need to update the file from a download of catalyst frensh.

  Here all DUMP files and the news of the computer:

  All files: https://skydrive.live.com/redir?resid=10F449F32E80D9B2! 390

  Thank you!

  8ternity

  They were related to the following

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Is usually caused by
  a bad block in the disk controller or paging file error.

  My gut feeling is that it is one of these drivers or your moy.  I would like to update the drivers and replace AVG with the built-in Defender

  000 fcl 26/09/2008 09:11:22
  ksaud.sys 2010-07-14 06:12:54
  ntk_PowerDVD_64.sys 03/08/2010 05:04:12
  PxHlpa64.sys 2011-10-17 10:29:34
  amdsbs.sys 21/02/2012 14:15:43

  AVG can be a cause of BSOD.

  http://www.Avg.com/us-en/utilities

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• Windows BSOD

  I have the same problem with BSOD with error message saying Kernal_Inpage_Data_Error and went through the steps of the answer and thought that I was.  Where should I send my .dmp files?  In an e-mail?  To whom? Thank you very much.  This has been a real head scratcher.

  Hello

  Do you use a SSD? Or RAID? Double control "EVERYTHING" on the hard drive.
  controller and wiring (from the discontinuation of ALL power first).

  -----------------------------------------------------------------------------------------------

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8).
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  methods of troubleshooting BlueSceens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -----------------------------------------------------------------------------------------------------------

  BCCode: 7A 0x0000007A

  The main causes of this error are virus/malware, drivers, memory, and disk damage. And
  It may even be combinations of those so meticulous control of all is needed. Possible addition
  the causes are such as the motherboard damaged material errors or other materials.

  BCCode: 7A 0x0000007A

  Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR

  The KERNEL_DATA_INPAGE_ERROR bug control has a value of 0x0000007A. This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.
  KERNEL_DATA_INPAGE_ERROR parameters

  The four parameters that are listed in the message can have three possible meanings. If the first parameter is 1, 2 or 3 and the third parameter is 0, the parameters have the following definitions.

  Parameter	Description
  1	The type of lock which took place (1, 2 or 3)
  2	The error status (usually a State of I/O code)
  3	If lock Type is 1: the current process If lock Type is 2 or 3: 0
  4	The virtual address that could not be paged into memory

  If the first parameter is 3 (and the third parameter is nonzero) or 4, the parameters have the following definitions.

  Parameter	Description
  1	The lock type that was held (3 or 4)
  2	The error status (typically an I/O status code)
  3	The address of the InPageSupport structure
  4	Failing address

  Otherwise, the parameters have the following definitions.

  Parameter	Description
  1	The address of the page table entry (PTE)
  2	The error status (usually a State of I/O code)
  3	The PTE contents
  4	Failing address

  Cause

  Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:

  • 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.

  • 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.

  • 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.

  • 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.

  • 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.

  • 0xC000000E or STATUS_NO_SUCH_DEVICE, indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.

  These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).

  Another common cause of this error message is the defective material or failing RAM.

  A virus infection can also cause this bug check.

  Resolution

  Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.

  If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  
  WARNING if your system partition is formatted with the FAT file system, the long line that names the windows operating system uses could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  
  Fix a defective hardware problem: if the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.

  
  Resolve a problem RAM failure: run the diagnostics of material feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.

  Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.

  Make sure that the latest Windows Service Pack is installed.

  If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.

  
  Solve an infection by the virus: check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)

  BCCode: 7A 0x0000007A<-- read="" this="">
  * 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  =============================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is
  clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  =================================

  Check the hard disk for errors:

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8 - why isn't Windows find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 8 hardware windows BSOD error video error BCCode: 141.

  Original title: Video hardware error windows 8.

  Hi I recently saw this as i much as I remember that I don't have an error freezes or BSOD

  I have a graphics update

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.2.9200.2.0.0.768.100
  Locale ID: 1033

  Files helping to describe the problem
  WD-20140425 - 0213.dmp
  SysData. XML
  WERInternalMetadata.xml

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 141
  BCP1: FFFFFA8005E71010
  BCP2: FFFFF8800609828C
  BCP3: 0000000000000000
  BCP4: 0000000000000D 60
  OS version: 6_2_9200
  Service Pack: 0_0
  Product: 768_1

  You have to wait the next system crash.

  Kind regards

  Patrick

• Windows BSOD error

  Hello

  These days I often BSOD error ' DRIVER_IRQL_NOT LESS OR EQUAL (tcpip.sys) and even I am unable to copy or zip the dump file, it saying: access denied.»

  Please help me

  Hello

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  -If she always says that you have not the permission, you must Take Ownership- http://www.eightforums.com/tutorials/2814-take-ownership-add-context-menu-Windows-8-a.html

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

  Thank you very much for your help...

  I found the reason why is because of Anti-Malware software and I uninstalled that. All is well now

• Windows BSOD error 8 "Bad Pool Caller."

  Original title: Windows 8 BSOD

  Dear Windows people

  I got the dreaded Blue Screen of Death on my laptop Acer Aspire E1 - 750 cheap but good mood who gave error code 'Bad Pool Header', then 'Bad Pool Caller'. He couldn't get past this screen at start up. Using Windows 8.0, no devices (in fact, I was trying to plug a Kobo in the USB port, and does not recognize him, he was charging, led me to restart the laptop, to achieve the above error messages.

  Very surprised because it is relatively new, and the previous Amilo (Windows XP) I had, had 8 years of operation without BSOD.

  The files don't the zip.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Windows BSOD Crash 10 during the signature version 7.24

  Hey guys,.

  I'm having the issue of Skype crashing point reset the computer every time I open a session. I have a few delicious diagnostics for you. If you have an idea of what is the cause and how to fix it would be super awesome!

  Thank you

  B

  https://community.Skype.com/T5/Windows-desktop-client/Skype-freezes-my-computer-completely-every-Tim...

• Windows BSOD v3 - 772 g 8.1 problems

  After I upgraded my v3 - 772g to Windows 8.1 (via windows store) I keep geeting blue screen.

  This is the entrance to system log I get:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b72bdeedd96582, 0xfffff803a48fa000, 0xa3a01f589b59651f, 0 x 0000000000000003). A dump was saved in the: C:\WINDOWS\MEMORY. DMP. Report ID: 101813-6015-01.

  Anyone else with these problems?

  The problem was related to Intel® Hardware Accelerated Manager of enforcement, uninstalling it solved the problem.