Windows BSOD

Similar Questions

• Problem Pro P300 running Windows BSOD 10 satellite on inserting USB

  I have a beloved P300 of 2009 happily running on Windows 10 except for the fact that whenever I insert a USB key into one of the USB ports, I get the blue screen of WIndows 10 (very friendly) and the computer restarts giving REFERENCE_BY_POINTER error code. Strangely, mouse USB and USB cable to the printer do not cause the same problem (printer and mouse work perfectly). Something not just with the feature id plug & play USB, so my first thoughts were to the BIOS and updated the BIOS from the original CD (2009) - maybe a BIOS up to date would be available? Any suggestions are welcome.

  SOLVED - have solved the BSOD on inserting the USB and post it here for anyone else who has the problem - good for the BSOD problems. I solved it by watching the minidump files (go to C: > Windows > Minimdump) and their reading with my event - FREE to http://www.nirsoft.net/utils/my_event_viewer.htmldownload viewer Nirsoft. When the computer has BSOD had a minidump (.dmp) file is created and the drive of NirSoft helps you make sense. In my case it was Roxio Easy CD creator, which was causing the problem. Remove Roxio and everything was fine. Update Windows normal 10, this anomaly would have been found, but you cannot move to 10 Windows XP so my Windows 10 is a clean install. I hope this helps.

• Update Windows BSOD

  I am a user of Windows XP Pro and so far has been affected by the problem of Windows Update BSOD even if I got my updates on. This brings me to the question, why this issue affects users of Windows XP and not others?

  Does anyone know?

  Some users of Windows XP have infested computers hijackware. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows BSOD 10 memory management issues aspire FIH57

  Hello

  I have upgraded from Windows 7 to Windows 10 recently and have met various BSOD problems. Generally, it would be a warning on the Page of corrupt of defective material but sometimes he also gave errors IRQL not less or equal. I have been in contact with Microsoft and you have run various bugfixes including troubleshooting to fix/update all drivers, sfc/scannow & dism.exe/online/cleanup-image /restorehealth where no error has been detected.

  Today, I got a new error when the computer crashed, namely a memory management error.

  I ran Windows Memory Diagnostic that has reported the following:

  Your computer has a memory problem

  Memory problems can cause the computer to lose information or stop working. To identify and fix the problem, contact the manufacturer of the computer.

  Did somebody encountered this problem before, and if so, what is the next step?

  Any help would be appreciated.

  Thank you!

  99% a bad ram module.

  If your system has 2 ram module, you can try to start with a single and made a windows memory test and see who we have problems.

• XPS 15 (9550) Windows BSOD 10 DRIVER_CORRUPTED_EXPOOL

  I have experience at least one daily BSOD on my new Dell XPS 15 (9550) running Windows 10.  DRIVER_CORRUPTED_EXPOOL.  Ntoskrnl.exe + 151d0

  You have updated to the latest version of the BIOS? Yes.

  Your drivers are up to date?  Yes.

  Are you running the driver version 1.1 for the SSD is Samsung?  Yes

  Do you use UEFI in AHCI mode?  Yes

  You have reloaded your operating system from scratch?  Yes.

  I'm curious to know after you have reinstalled Windows, how long to wait before installing programs or drivers, just to let the system run Windows only and see if you still receive the error?  I'm almost tempted to suggest working with the system in SafeMode overnight and check in the morning to see if there are blue screens.

  I could check the resource monitor and see if all programs stand using an abnormal amount of system resources, open Task Manager (press the windows with the x button, choose Task Manager) click on the performance tab and then click the resource monitor button. You can see at a glance which fits CPU, memory, disk and network resources and maybe get a hint about what is at the origin of the problem.

  I you will be shooting a friendship, with the erratic error request so I'm careful about suggesting replacements of parts, but if the problem persists, it may be something to consider.

  TB

• Windows BSOD 8: System Service Exception - tcpip.sys

  Hello

  I got a new laptop for Christmas and updated to Windows 8. There has already been some hissing adjustments with me. A few days ago I tried to update the OS (continued to come with the update failed) unsuccessfully until today where I got it working after leaving it while I was at school. This has been the most recent installation, I know, and it has been fine for the last time to date. He can't go 3 minutes without a BSOD.
  The error message I get is: System Service Exception - tcpip.sys.
  Any contributions to this issue would be appreciated
  Thank you
  Owen

  Owen

  This single DMP has been altered, so I can't give you definitive information yet.  Often when crashing in tcpip.sys, it's due to malware, or real malware application installed.  I would like to delete bitdefender and replace it with MSE (at least for testing).  It's a PNP (plug and Play) device just not sure what atm.

  You have also some old drivers that need updating.  If you continue to plant please download each of them.
  Update of these (if available)
  
  mwlPSDVDisk.sys Fri Mar 25 03:12:23 2011 (4D8C4057)
  EgisTec Inc. digital fingerprint biometrics.
  http://www.carrona.org/drivers/driver.php?id=mwlPSDVDisk.sys
   
  irstrtdv.sys Wednesday, June 15 at 14:52:49 2011 (4DF8FF81)
  QuickStart storage technology driver Intel®
  http://www.carrona.org/drivers/driver.php?id=irstrtdv.sys
   
  k57nd60a.sys Wed Oct 19 16:17:36 2011 (4E9F3060)
  Broadcom NetLink Gigabit Ethernet NDIS6.x Unified Driver
  http://www.carrona.org/drivers/driver.php?id=k57nd60a.sys
   
  NSNetmon.sys Thu Nov 8 16:29:32 2011 (4EB99F3C)
  Pilot NovaShield Kernel network Module that is believed to be a part of BullGuard Internet Security
  http://www.carrona.org/drivers/driver.php?id=NSNetmon.sys
   
  NSKernel.sys Thu Nov 8 16:29:41 2011 (4EB99F45)
  Pilot of the kernel Module of NovaShield is believed to be a part of BullGuard Internet Security
  http://www.carrona.org/drivers/driver.php?id=NSKernel.sys
   
  HECIx64.sys Wednesday Nov 9, 19:52:25 2011 (4EBB2049)
  Intel Management Engine Interface
  http://www.carrona.org/drivers/driver.php?id=HECIx64.sys
   
  iaStor.sys kills Nov 29 22:39:19 2011 (4ED5A567)
  Intel storage drivers
  http://www.carrona.org/drivers/driver.php?id=iastor.sys
   
  IntcDAud.sys Tue Dec 6 06:23:07 2011 (4EDDFB1B)
  Intel Graphics Media Accelerator HD driver
  http://www.carrona.org/drivers/driver.php?id=IntcDAud.sys

• Windows BSOD error 8

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error has occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 holds the address of the
  WHEA_ERROR_RECORD structure that describes the error conditon.
  Arguments:
  Arg1: 0000000000000000, Machine Check Exception
  Arg2: fffffa80059cb028, Address of the WHEA_ERROR_RECORD structure.
  Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
  Arg4: 0000000000010019, Low order 32-bits of the MCi_STATUS value.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  BUGCHECK_STR:  0x124_GenuineIntel
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  
  PROCESS_NAME:  chrome.exe
  
  CURRENT_IRQL:  f
  
  STACK_TEXT:
  fffff880`0148b868 fffff802`31e3e965 : 00000000`00000124 00000000`00000000 fffffa80`059cb028 00000000`b2000000 : nt!KeBugCheckEx
  fffff880`0148b870 fffff802`31fddeb3 : 00000000`00000001 fffffa80`042a7850 00000000`00000000 fffffa80`059cb028 : hal!HalBugCheckSystem+0xf9
  fffff880`0148b8b0 fffff802`31e3e703 : 00000000`00000728 00000000`00000003 fffff880`0148ba10 fffffa80`042a7850 : nt!WheaReportHwError+0x253
  fffff880`0148b910 fffff802`31e3e020 : 00000000`00000010 fffffa80`042a7850 fffff880`0148bac8 fffffa80`042a7850 : hal!HalpMcaReportError+0x53
  fffff880`0148ba70 fffff802`31e3df1b : fffffa80`0435fd50 00000000`00000001 00000000`00000003 00000000`00000000 : hal!HalpMceHandlerCore+0xd4
  fffff880`0148bac0 fffff802`31e3dd78 : 00000000`00000004 00000000`00000001 00000000`00000000 00000000`00000000 : hal!HalpMceHandler+0xe3
  fffff880`0148bb00 fffff802`31e3ef0f : fffffa80`0435fd50 fffff880`0148bd30 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0xd4
  fffff880`0148bb30 fffff802`31ed577b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
  fffff880`0148bb60 fffff802`31ed552e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7b
  fffff880`0148bca0 00000000`647109db : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x16e
  00000000`0727ede0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x647109db
  
  STACK_COMMAND:  kb
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: GenuineIntel
  
  IMAGE_NAME:  GenuineIntel
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  0
  
  FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  Followup: MachineOwner
  

  SR

  This is called a BCC124 and is linked to the material.  Since "genuine Intel" is referenced in your, I would run a cpu stress test.

  

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Windows BSOD KERNEL_DATA_INPAGE_ERROR 8; Ntoskrnl.exe + 7 has 040

  Hello world

  I had reinstall Windows 8 last month cause too many errors with the Windows 8 and I had still BOSD arrives with a new installation of Windows 8.

  The last that I have no will is this one:

  KERNEL_DATA_INPAGE_ERROR

  Ntoskrnl.exe + 7 has 040

  We arrive in surfing on the web and burning with IMGBURN. Many Disconnections occur when you use the dvd burner.

  The other at the moment that I solved is "atikmpag.sys" I read on the net that I need to update the file from a download of catalyst frensh.

  Here all DUMP files and the news of the computer:

  All files: https://skydrive.live.com/redir?resid=10F449F32E80D9B2! 390

  Thank you!

  8ternity

  They were related to the following

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Is usually caused by
  a bad block in the disk controller or paging file error.

  My gut feeling is that it is one of these drivers or your moy.  I would like to update the drivers and replace AVG with the built-in Defender

  000 fcl 26/09/2008 09:11:22
  ksaud.sys 2010-07-14 06:12:54
  ntk_PowerDVD_64.sys 03/08/2010 05:04:12
  PxHlpa64.sys 2011-10-17 10:29:34
  amdsbs.sys 21/02/2012 14:15:43

  AVG can be a cause of BSOD.

  http://www.Avg.com/us-en/utilities

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• 8 hardware windows BSOD error video error BCCode: 141.

  Original title: Video hardware error windows 8.

  Hi I recently saw this as i much as I remember that I don't have an error freezes or BSOD

  I have a graphics update

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.2.9200.2.0.0.768.100
  Locale ID: 1033

  Files helping to describe the problem
  WD-20140425 - 0213.dmp
  SysData. XML
  WERInternalMetadata.xml

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 141
  BCP1: FFFFFA8005E71010
  BCP2: FFFFF8800609828C
  BCP3: 0000000000000000
  BCP4: 0000000000000D 60
  OS version: 6_2_9200
  Service Pack: 0_0
  Product: 768_1

  You have to wait the next system crash.

  Kind regards

  Patrick

• Windows BSOD error

  Hello

  These days I often BSOD error ' DRIVER_IRQL_NOT LESS OR EQUAL (tcpip.sys) and even I am unable to copy or zip the dump file, it saying: access denied.»

  Please help me

  Hello

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  -If she always says that you have not the permission, you must Take Ownership- http://www.eightforums.com/tutorials/2814-take-ownership-add-context-menu-Windows-8-a.html

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

  Thank you very much for your help...

  I found the reason why is because of Anti-Malware software and I uninstalled that. All is well now

• Windows BSOD error 8 "Bad Pool Caller."

  Original title: Windows 8 BSOD

  Dear Windows people

  I got the dreaded Blue Screen of Death on my laptop Acer Aspire E1 - 750 cheap but good mood who gave error code 'Bad Pool Header', then 'Bad Pool Caller'. He couldn't get past this screen at start up. Using Windows 8.0, no devices (in fact, I was trying to plug a Kobo in the USB port, and does not recognize him, he was charging, led me to restart the laptop, to achieve the above error messages.

  Very surprised because it is relatively new, and the previous Amilo (Windows XP) I had, had 8 years of operation without BSOD.

  The files don't the zip.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Windows BSOD Crash 10 during the signature version 7.24

  Hey guys,.

  I'm having the issue of Skype crashing point reset the computer every time I open a session. I have a few delicious diagnostics for you. If you have an idea of what is the cause and how to fix it would be super awesome!

  Thank you

  B

  https://community.Skype.com/T5/Windows-desktop-client/Skype-freezes-my-computer-completely-every-Tim...

• Windows BSOD v3 - 772 g 8.1 problems

  After I upgraded my v3 - 772g to Windows 8.1 (via windows store) I keep geeting blue screen.

  This is the entrance to system log I get:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b72bdeedd96582, 0xfffff803a48fa000, 0xa3a01f589b59651f, 0 x 0000000000000003). A dump was saved in the: C:\WINDOWS\MEMORY. DMP. Report ID: 101813-6015-01.

  Anyone else with these problems?

  The problem was related to Intel® Hardware Accelerated Manager of enforcement, uninstalling it solved the problem.

• Clean installed of 8.1 to 10240 10 Windows, BSOD after windows updates.

  
  

  Well HP, I can fortunately smile and call you useless, I solved this problem with the rapid storage driver of intel in conflict with other things here. So, if you cannot restart and have just restored and google and found yourself here, don't activate windows update, disable via the services.msc windows and download updates manually, and drivers from HP or your God of machines.

• C4 Windows BSOD error 7

  My Dell Inspiron periodically stop with BSOD - C4 error 0 x 0000000000000062, 0xfffff1800f4ef410, 0xfffffa800bf8c520, ox0000000000000001 (this is the last error) saying that a driver has been stopped as a result of the system of. I have not installed new hardware or software in months. All devices, except the mouse, are turned off. Update Dell says all drivers are up-to-date and not reported hardware problems.

  This occurs when the system is idle. Norton360 could do the background process, but I don't know.

  Any ideas?

  Carolyn

  WARNING: Unable to verify timestamp for IDSvia64.sys<==>
  ERROR: Module load completed but symbols can be loaded for IDSvia64.sys
  Probably caused by: IDSvia64.sys

  This accident was caused by your Norton AV.  Please uninstall and install MSE (Microsoft Security Essentials) or another AV of your choice.

  Download and run the Norton removal tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/v60392881_EndUserProfile_en_us

  Microsoft Security Essentials

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Note: Check and make sure, that check has been reset.