Windows BSOD v3 - 772 g 8.1 problems

Similar Questions

• Windows BSOD

  I have the same problem with BSOD with error message saying Kernal_Inpage_Data_Error and went through the steps of the answer and thought that I was.  Where should I send my .dmp files?  In an e-mail?  To whom? Thank you very much.  This has been a real head scratcher.

  Hello

  Do you use a SSD? Or RAID? Double control "EVERYTHING" on the hard drive.
  controller and wiring (from the discontinuation of ALL power first).

  -----------------------------------------------------------------------------------------------

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8).
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  methods of troubleshooting BlueSceens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -----------------------------------------------------------------------------------------------------------

  BCCode: 7A 0x0000007A

  The main causes of this error are virus/malware, drivers, memory, and disk damage. And
  It may even be combinations of those so meticulous control of all is needed. Possible addition
  the causes are such as the motherboard damaged material errors or other materials.

  BCCode: 7A 0x0000007A

  Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR

  The KERNEL_DATA_INPAGE_ERROR bug control has a value of 0x0000007A. This bug check indicates that the data page of the kernel of the required paging file cannot be read into memory.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.
  KERNEL_DATA_INPAGE_ERROR parameters

  The four parameters that are listed in the message can have three possible meanings. If the first parameter is 1, 2 or 3 and the third parameter is 0, the parameters have the following definitions.

  Parameter	Description
  1	The type of lock which took place (1, 2 or 3)
  2	The error status (usually a State of I/O code)
  3	If lock Type is 1: the current process If lock Type is 2 or 3: 0
  4	The virtual address that could not be paged into memory

  If the first parameter is 3 (and the third parameter is nonzero) or 4, the parameters have the following definitions.

  Parameter	Description
  1	The lock type that was held (3 or 4)
  2	The error status (typically an I/O status code)
  3	The address of the InPageSupport structure
  4	Failing address

  Otherwise, the parameters have the following definitions.

  Parameter	Description
  1	The address of the page table entry (PTE)
  2	The error status (usually a State of I/O code)
  3	The PTE contents
  4	Failing address

  Cause

  Frequently, you can determine the cause of the error status (parameter 2) KERNEL_DATA_INPAGE_ERROR bug check. Some common status codes are:

  • 0xC000009A or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of non-paged pool resources.

  • 0xC000009C or STATUS_DEVICE_DATA_ERROR, generally indicates bad blocks (sectors) on the hard disk.

  • 0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose wiring, termination or that the controller does not see the hard drive.

  • 0xC000016A or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.

  • 0xC0000185 or STATUS_IO_DEVICE_ERROR, indicates improper termination or defective cabling devices SCSI or two trying to use the same IRQ.

  • 0xC000000E or STATUS_NO_SUCH_DEVICE, indicates a hardware failure or an incorrect drive configuration. Check your cables and check the disk with the available from the manufacturer of your drive diagnostic utility. If you use old PATA (IDE) disks, this status code may indicate a bad master/subordinate drive configuration.

  These status codes are common ones that have specific causes. For more information about other possible status codes that can be returned, see the Ntstatus.h file in the operating system Microsoft Windows Driver Kit (WDK).

  Another common cause of this error message is the defective material or failing RAM.

  A virus infection can also cause this bug check.

  Resolution

  Solve a problem of bad block: Generally, a status I/O of 0xC000009C or 0xC000016A code indicates that the data can not be read from the disk due to a bad block (sector). If you can restart the computer after the error, Autochk runs automatically and tries to map the bad sector so that it is more used.

  If Autochk does not scan the hard disk for errors, you can manually start the disk scanner. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  
  WARNING if your system partition is formatted with the FAT file system, the long line that names the windows operating system uses could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  
  Fix a defective hardware problem: if the State of e / is C0000185 and the paging file is on a SCSI disk, check the cabling and SCSI termination for problems.

  
  Resolve a problem RAM failure: run the diagnostics of material feeding by the system manufacturer, especially the memory scanner. For more information about these procedures, see the manual of your computer.

  Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  Check the system log in Event Viewer for additional error messages that might help identify the device that is causing the error. You can also disable caching memory BIOS to try to resolve this error.

  Make sure that the latest Windows Service Pack is installed.

  If the previous steps do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can cause this error.

  
  Solve an infection by the virus: check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  See also - control bug 0x77 (KERNEL_STACK_INPAGE_ERROR)

  BCCode: 7A 0x0000007A<-- read="" this="">
  * 1137.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  =============================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is
  clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
  Run them in regular Windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  =================================

  Check the hard disk for errors:

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8 - why isn't Windows find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion &amp; "Windows 7 Upgrade Advisor came across a problem.

  Windows 7 would work on my laptop (HP Pavilion dv6132eu)?

  So I used "Windows 7 Upgrade Advisor" of the Microsofts. Which caused the error "Windows 7 Upgrade Advisor stumbled into a problem that your scanning devices. Upgrade Advisor needs to be able to scan your devices to determine whether your computer is capable of running Windows 7 ".

  The laptop is probably not good enough for Windows 7, why?

  I assumed, the Upgrade Advisor would tell me, what pieces of hardware is / are not specific to Windows 7.

  In a forum Technet, say, the Adviser is blocked by some HP hardware. Which?

  Best regards, Willem

  My problem has been resolved.

  Previously, the problem with "Windows 7 Upgrade Advisor BETA.

  I waited two months - now, I executed the Adviser again, resulting in "an important upgrade".

  And guess: update Advisor works like a rocket, finishing with a nice report with minor problems.

  So I think that the problem was a "Windows 7 Upgrade Advisor" - problem - not a HP computer laptop-problem.

• A new appreas to window with "firefox.exe has encountered a problem, you must close...". "'Send report' 'do not send report '.

  While browsing with firefox Mozila, sometimes in a minute or 2/3 a new window appears "Firefox.exe has encluntered a problem, you must close...» "' Don't send lAs line"Send report""do not send report", tap on" close firefox window.

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if its working.

• Microsoft or windows never contact you by phone about problems, that I get these calls very frustrating!

  Microsoft or windows never contact you by phone about problems, that I get these calls very frustrating!

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.Microsoft.com/en-GB/security/online-privacy/avoid-phone-scams.aspx

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page.

  I had to reinstall xp pro and windows update said itn has encountered a problem and cannot display the page. I have sp2, what don't get me?

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 07:51 on Wednesday, August 15, 2012

• Error: "Windows is busy. There will be problems if closed. I don't want to close anyway.

  Title: close research will not get messagebusy if close ddown will cause problems

  Windows will work not to close the get message windows is busy. There will be problems if closed. I don't want to stop anyway. Microsoft internet Explorer

  Thank you. I solved the problem by uninstalling and reinstaling research.

• e-mail and messenger does not not work error msg (Windows Live communication platform) has encountered a problem and needs to close.

  I got this error msg (Windows Live communication platform) has encountered a problem and needs to close. We are sorry for the inconvience.

  If you were in the middle of something information you were working on might be lost.

  Not able to use my e-mail and Messenger at all, as this message keeps on pop up.

  Rgds

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• My Task Manager displays all of the window. How can I solve this problem.

  original title: Task Manager

  My Task Manager displays all of the window.  How can I solve this problem.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will be
  return to normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:

  http://www.BROADBANDreports.com/FAQ/6905

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.
  Read :--->

• Windows Live OneCare scanner detects the serious problem that cannot be cleaned

  running Windows XP IE8 scan indicates a serious problem that it can't remove and when you select several option info message appears that saysOne care site is temporarily down. has been held twice in the last 2 weeks

  Hi Trex2561,

  I suggest you to run a virus scanto online check if your computer is infected and check if you can clean the infection. Go to the link below to run an online virus scan.

  http://safety.live.com

  You can also contact Microsoft Live Onecare Support to check if you need to install the updates of the software clean the infection.

  A link to contact Microsoft Live OneCare support:

  http://OneCare.live.com/standard/en-us/support/default.htm

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• Windows Vista gives me an unidentified network problem. I can't access the internet.

  Cannot access internet. what I do?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Method 3:

  I also suggest you to reset TCP/IP

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .

  See also:

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

• I can't get connected to Windows Live Messenger.__Everytime I connect happens __Can "Windows Live Messenger has stopped working, a problem caused the program to close down" help please

  I can not get connected to Windows Live Messenger.
  Whenever I connect it comes up "Windows Live Messenger has stopped working, a problem caused the program to close down."
  Can you help me please

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I try to install a program I get a message that a program being installed. Which includes all updates to Windows. How can I fix this problem?

  Whenever I try to install a program I get a message that a program being installed.  Which includes all updates to Windows.  How can I fix this problem?

  Hello
  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/822798

  It will be useful.