800b0100 error code - is not able to resolve

Similar Questions

• Error code: 80070003 not able to install Section 8: prejudice

  Applies to: Windows | Other event/event unknown | Original title game: problem with the installation 8:Prejudice Section.  I recently bought Windowns Live Marketplace. I downloaded it twice now, and when I try to install it, it gets to 5% and then it asks me for permission, but then he says "can not install point."     The point installation failed.  If the attempt fails, delete and re-upload.  Code: can 80070003 someone help me with this error? Any help is appreciated.

  Hello
  • What version of Windows are you using?
  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Error code 0x000000TF not able to boot in safe mode on Windows XP computer.

  Original title: xp suddenly will not start in safe mode.

  I haven't added any software and I don't seem to have any virus, any help?

  error message 0x000000TF 0 x 80042000, 0x00000000, 0x00000000)

  Try at least the basics:

  1. first of all, check the intregity of your player. If it is not quite right, you will not be able to start. If fix you (by running chkdsk), maybe it's ALL that is necessary. At the command prompt, run this command:

  Chkdsk /r

  (There is a space before the slash). I know that that page has a slightly different order, but the /r switch (to repair bad sectors and recover readable data) is all that is necessary. For more information, see:

  http://vlaurie.com/Computers2/articles/Chkdsk.htm

  Plan for several hours to run chkdsk/r. But this could very well be all that is necessary.

  2. If still no joy, you'll need to fix your boot.ini file. Until you do this, you will have to remove some attributes of this file, so you can change (the flags 'Hidden' and 'System' and 'Read only'). So, at the command prompt, enter these commands:

  C:ATTRIB H C:\\BOOT. INI
  C:ATTRIB R C:\\BOOT. INI
  C:ATTRIB S C:\\BOOT. INI

  Then, delete the boot.ini file. It is fine to do, especially if there is something wrong with her! You create a new.

  DEL BOOT. INI

  Now, rebuild your boot.ini file:

  BOOTCFG /REBUILD

  (even when there is a space before the slash)

  Continue to follow the instructions on this page:

  http://tech.Icrontic.com/articles/repair_windows_xp/

  Add installation to boot list? Enter y

  To enter load identifier, type:

  Windows XP Home Edition (I think that's what you have. For XP Pro, type "Windows XP Professional")

  To the operating system load options, type:

  / / fastdetect / noexecute = optin

  (even once, there is a space before each slash)

  Note that in case your CPU has NO other buffer overflow protection, you must not enter the "' / noexecute = optin" switch. " But it's a safe assumption you have and you should use it. Google or ask here if you don't know what CPU you have.

  For pour ecrire to write the newly created boot sector on the hard disk, type the following at the prompt:

  FIXBOOT

  (And press on Y to confirm).

  I mean chkdsk /r first because that's all that would be necessary. But you also have other instructions. If still no joy, restoring the so-called manual system might work:

  http://support.Microsoft.com/kb/307545

  If still no joy, I'd go for the Clean install (of course, you can also try a repair installation before that gap very last effort, but repair installs can sometimes be very difficult).

  Have you confirmed that all your data is backed up. If you perform a clean installation, you erase your hard drive, you know!

• error code 80072efd, not able to install updates for Microsoft put updated or Anti virus

  I tried to update my laptop with Windows Vista Ultimate Edition with the latest updates of security etc from Windows.  I can't update.  When I try to go to the site it blocks just the pop up with a page download page as mif I am no longer connected to the internet.

  When I try to download updates for the anti-virus software, I get the same problem.  I've followed all the advice available online to those problems, s.  Disabling the firewall and make sure wondowsupdate.com et al. are allowed through the firewall, but nothing helped.

  Please please I need to sort my fear that my laptop is in jeopardy.

  Adam

  It's happened since Sept/Oct 2009... have previously had installed mcafee who started do not work/update

  Believe me: AVG was not installing properly & is not working properly and that you are dealing with an infection hijackware well-rooted here!

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• Yet CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Someone has encountered this: still CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Any ideas on what this means or how to fix it?

  Burn to a BD - R.  Tried two different Blu - ray burners.  First created a Blu - ray Image.

  For CS4, you must update the component of Roxio http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  In addition, the names of long file or odd characters Cause crashing http://forums.adobe.com/thread/588273
  And here http://forums.adobe.com/thread/666558?tstart=0 #4
  And this thread of Message http://forums.adobe.com/thread/665641?tstart=0

• Vista Windows Update error 80072EFE code were not able to be updated since dec.

  The Pc does not automatically update or raised. Error Code 80072EFE in windows update.  PC stops a lot, window32n problem. I'm lost!

  The following link might be worth a visit:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072efe/70dcea4c-F858-E011-8dfc-68b599b31bf5?page=1&TM=1301417800456#footer >

  04/22 / 1105:27: 50 pm

• 800b0100 error code when you try to install Windows updates KB974145 and KB978251

  Greetings and salutations:

  Any help would be appreciated.

  I tried to install these 'important' updates several times with the same result - updates failed, error 800b0100 code. I downloaded and installed the KB974821 tool - tells me it installed - same problem. (I don't know if I'm supposed to do something else with KB974821 - I have to "run" or just "installed" it enough?) Instructions could certainly be clearer)

  I tried to download and install the updates manually - without success - I get various error messages, like "does not apply to your system" or "for a different hardware platform.

  I tried this with my firewall/antivirus close as well - using Trend Micro - and still no luck.

  Thoughts, comments, suggestions, help? Very much appreciated. Thank you.

  
  

  BTW, I'm running VHP 64 with Service Pack 2 installed. Nothing should be this complicated or frustrating.

  Additional information:

  In another forum, where I posted this inquiry (I was told is the right place to post it here) I was advised on how to get the results of the KB947821 tool that I ran.  (Why this information was not given instructions on how to use the tool is beyond me). Here are the results of the analysis, apparently:

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1695
  Found 4 errors
  CBS Watchlist component lack Total count: 4
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  So apparently the errors were detected. What they mean and how to fix them? Thank you!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error 80070490. Not able to install update KB978542 security.

  Original title"error 80070490.

  get error 80070490 after trying to install update KB978542 security. Hoping to get help with this soon, he began to do for me!

  Response copied from Steve Wechsler

  For beginners and intermediate users.

  (1) you receive an error code "0 x 80070490" when you use Windows Update or Microsoft Update Web sites to install updates http://support.microsoft.com/kb/958044>

  > This problem may occur if there is corruption in component maintenance (EC) manifest.

  (a) run sfc/scannow from an elevated command http://support.microsoft.com/kb/936212prompt >

  (b) download, save and then run the update of the system (or CheckSUR) tool http://support.microsoft.com/kb/947821>

  (c) > to resolve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation.

  > Performing a repair installation will restore you the current installation of Windows for the version of the

  > Installation DVD. It also requires the installation of all the updates that are not on the

  > Installation DVD.

  For advanced users or the intrepid.

  (2) how to overcome error 0 x 80070490 installing updates in Windows Vista/Server 2008 http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-windows-vista-server-2008.aspx>

  3) manually update. Security updates are issued the second Tuesday of the month.

  Of security no Windows updates are issued the fourth Tuesday of the month.

  Description of changes to Software Update Services and Windows Server Update Services content for 2010 http://support.microsoft.com/kb/894199>

  Be wary of the installation of NON-essential software * which will then be updated when a flaw is discovered in them.

  Ex: Windows Desktop Search; Silverlight; etc.

• 800b0100 error code when you try to install KB2449742

  Tried to install the KB2449742 update every day since that he has published since April 19, but get error 800b0100 code every time Singel - tried with and without virus running program - nothing works HELP!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

• Re: bluetooth installation error code 2753 not marked setupdui.exe to install.

  I was triying to install the bluetooth stack and the installation package produces the error code 2753.
  what it means?
  How can I solve this problem?
  My computer is satellite A300-14 t
  Please tell me not driver download (so far I did 4 times)

  Take a look at the discussion that follows. I think it solves your problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=115489𜌡

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 84 40007 error code - do not install - Microsoft SQL SERVER 2008 Service Pack 2 (KB2285068)

  I was trying to install the option upgrade Microsoft SQL SERVER 2008 Service Pack 2 (KB2285068) when I experienced a power failure.   The installation was not yet complete.  Subsequent attempts to reinstall the Windows Update option always lead the 84 40007 - installation failure error Code.  Any thoughts on the fix?

  How does this relate to the features of Internet Explorer?

  Try posting in the SQL Server Setup & Upgrade forum for appropriate assistance:http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft