802.11n interference

Similar Questions

• 802.11n support... 2.4 or 5 GHz?

  Which printers have support for 802.11n on the 5 GHz band, rather than the (more current, but subject to interference) 2.4 GHz?

  No HP printer supports 5 GHz that I know.

• Only connect on 802.11n 5 GHz

  Hello

  I have the WAP321 to boost my wifi at home but I only managed to set up a stable wifi connection on 802.11n 5 GHz.

  Not all of my devices that support the 802.11n 5 GHz only a limited number of devices can connect. For example my iphone 4/4s does not connect.

  I think I'll have interferences of neighbor wifi AP but it must me a way to measure the field strength and determine a Setup program that will give me a good wifi signal on the tape 20GHz.

  Someone at - it suggestions to solve this problem.

  Kind regards

  André

  Hi Andre, you can install a program called INSSIDER made by Metageek. It can tell you about the interference and strength, etc.. It's a free program.

  The Iphone 4S doesn't have a capacity of 5 GHZ.

  http://www.Apple.com/iPhone/compare/

  -Tom
  Please mark replied messages useful

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• where is the download of the update for airport extreme 802.11n

  Where can I find the update of firmware for 802.11n on the El Captian 10.11.

  See updating the software on your airport - Apple Support base.

• Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Wireless Diagnostics warns on codes of countries in conflict.

  I ve got an AirPort Express 802.11n and an AirPort Extreme 802.11n

  The country code of the Airport Express is ok, but Airport Extreme shows me different options.

  Any suggestions?

  Please

  A factory default reset will set the area code of the AirPort Extreme back to the initial setting that it was when it was new, but this should not be necessary because you can change the country setting without having to perform a factory default reset.

  You can see the options available for your AirPort Extreme by opening AirPort Utility, by clicking on the image of the AirPort Extreme, and then click Edit in the window that appears.

  Click on the Wireless tab at the top of the window, and then click Wireless Options near the bottom of the window. Click on the country selection box to see the options available for your AirPort Extreme country.

  

  Apple is doing to "regionalize" airport routers, so, for example, that if you bought the AirPort Extreme in the AirPort Express to the United States and Europe, the country on the extreme options will only show of European countries, so that the country on the version options American Express shows countries in the Western hemisphere.

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• Pavilion P6 - 2176 s: update the ralink 802.11n wireless LAN card

  Receive a pop up saying that there is an update for ralink 802.11n wireless LAN card.

  Is - essential?

  Bad experience with the update of things that were not crucial.

  Thank you!

  Hello @css321,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about the way your computer displays a pop-up message prompting you to update the installed wireless card. I'd be happy to help you in this case!

  If you encounter any issues connecting to a wireless network on your computer, I wouldn't count the update as crucial. If your computer is having problems connecting to the network, even if the problem is intermittent, it may be a good idea to install the update.

  I hope this helps, and if you have any questions or concerns do not hesitate to post back!

  See you soon

• DV7-1245dx: computer laptop dv7-1245dx: update to card WiFi... Need for 802.11n

  I have a HP dv7-1245dx laptop AMD with a Wireless G Wifi Atheros ar5007 card. I want to update my WiFi card for 802.11n more speed fast and really would like if I can get bluetooth at the same time the new wifi card. Any IDE?

  In case anyone is looking for a solution... I did some more research and found that a

  Atheros AR5BXB92 AR9280 HP 482260-001 wireless adapter

  works very well.

• Satellite L650-11R - broadcom WLan 802.11n does not

  Hello!

  I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

  After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

  Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

  I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

  My laptop is Toshiba satellite L650-11R
  network card: broadcom 802.11n
  am on Windows 7 64 bit home edition

  Help me to find drivers or tell me how to install correctly with corect NIC drivers.

  Please help, thanks in advance!

  I solved my problem. All the drivers that I tried to install worked

  The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite A-L50-18r - WiFi 802.11n standard is not available

  I have a Toshiba Satellite L50-A-18r with a Qualcomm Atheros AR956x Wireless Network Adapter wich suports wifi 802.11 b/g/n, but no more than 15 to 20 Mbps to 50 Mbps, I can't send my router.

  Also, in advanced options for the wireless adapter there are 802. 11B only option.

  How can I activate 802.11n to get faster.

  What operating system do you use?

  Have you tried to update the driver WLan?

• Satellite Pro A200-16YT - update wireless adapter card for 802.11n

  Satellite Pro A200-16YT (PSAE1E) with Windows XP Professional SP3 from the East.
  I tried to increase my existing 54 Mbps wireless network speed by replacing the Atheros AR5007-EG existing with 802.11n 802.11a/b/g more quick adapter.

  The Atheros driver is v9.2.0.439 (08/04/2011) it's later. I tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a substitute, but without success. As well as trying the standard Windows wireless configuration, I used the Atheros Client Utility (ACU) which confirms that the card and the driver are installed and activated, but the radio does not, so no there is no association/connection to the wireless network!

  Reinstall the original AR5007 works without any problem. If someone experienced similar problems or can offer a solution, it would be greatly appreciated. Thank you

  Hello

  Not sure about this Wlan card but I read in the forum that some people had similar problems, allowing the new card Wlan.

  Check this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=253505

  It seems that the problem is related to the assignment of the WLan card pins.

• BCM94313HMGB combo wireless 802.11n and Bluetooth 3.0 half minicards UPgrade

  I recently bought your desktop pavilion pc p6-2378 with 8 64-bit windows.   Noticed that the Office lacks any wireless internet.

  Bought a BCM94313HMGB 802.11n and Bluetooth 3.0 high speed half mini-map and installed it.  Wireless driver works immediately.  But I donot see the radio bluetooth option anywhere.

  What Miss me?   Why didn't the radio bluetooth on the Device Manager?

  Yes. I saw that before posting.

  I used a mini-PCI card PCI-E and that caused the problem.  I inserted directly into the motherboard and bluetooth and wireless networking worked fine.

  Thank you.