Only connect on 802.11n 5 GHz

Similar Questions

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Problem connecting to 802.11n networks on Vista or Windows 7

  Hello

  Under both Vista business and Windows 7 Enterprise, I can connect to an 802.11n network only if the computer has not slept or hibernated. If the computer is asleep or in hibernation, I can connect is a 802.11n network until I restart. However, I can still access the 802. 11b / g fine after sleeping.

  Is this a problem driver or a matter of Intel 5100 AGN.

  One of them was to disable "Energy savings" in Manager device for the card, but that seems to make the system from time to time wants a blue screen.

  Not sure if it's a hardware problem, driver problem Intel or a Windows problem. Maybe someone could put a good solution, the version of the driver or the hotfix.

  Updates Microsoft or updates to Lenovo Power that came out last week corrected it. I had no need of updates to Intel.

• iPhone 5 only connects very well with 5 Ghz Wifi

  Hi all

  After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

  However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

  I tried to reset, restore the default values, reinstall iOS... any suggestions?

  Hello iovin80,

  Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

  Potential sources of Wi - Fi and Bluetooth interference
  Recommended settings for the WiFi routers and access points

  See you soon!

• Is satellite P870 - card WLAN 802.11n 5 GHz?

  I just bought a 2870 B DSL modem router wireless that supports the 2.4 and 5.0 Ghz.I set up both a 2.4 and 5.0 wireless systems, the old Toshiba P870 of one month running W7 (64-bit) can see and connect to the 2.4 Ghz network but can not see the 5.0 Ghz network.

  So the Realtek RTL 8723AE supports 5 Ghz? If so, what should I do for the Toshiba P870 or wireless modem to communicate to 5.0 Ghz?

  I tried the Realtek site, but they don't seem to have any information on the 8723.

  Thanks in advance.

  Can you please post exact phone model number and name of the model?

• ENVY 4500: Unable to connect to my 802.11n network.

  I have an Apple airport base station, set at 2.4 GHz.

  When it is set to use "802.11n (802.» 11 b/g compatible)"the printer connects without a problem.

  Airport report it the connection as 'PHY b/g mode.

  But I prefer to use "802.11n only. When I do, the printer will not connect to the network.

  Network test results indicate parameters - no. filtering FAIL. but the airport has no MAC filtering.

  The Printer Setup Wizard indicates my 802.11n network only, but does not connect to it.

  The specification, the printer is 802.11 b/g/n.

  How to connect to 802.11n only

  I solved this by logging in to the Web interface of the printer via the USB port and change the interface 802.11, an advanced option.

  Uncheck the box "in use of 802.11 network infrastructure using the behavior of b/g.

  

• 802.11n aggregation mode WGB

  Hello!

  I noticed this message during startup when upgrading from JB AP 1262 to 15.2 (2) in the bridge of the workgroup mode:

  "Disable 802.11n aggregation Repeater/GTC/NRB mode."

  I hope someone can clarify why aggregation is disabled and whether or not it is specific to the IOS again. Thank you!

  Well what I know is that Cisco would not support 802.11n for these types of connections and only really help customers. Now you can get the PTP bridges to connect to 802.11n, but this does not mean that Cisco supports. They may also removed the ability for these functions to support 802.11n. A few years back I have two 1252 close link and connect with N rates. Don't know if that still exists or not well.

  Sent by Cisco Support technique iPhone App

• First time with 802.11n, works does not correctly?

  Hello

  It's the first time I use 802.11n in my network there is an AP1141 but customers don't connect to 802.11n rates, instead, they connect to as low as 11 Mbit/s rates. At first, they connect to 144 Mbps but immediately it decreases to 11 or 12.

  Many of our clients wireless in the enterprise are Intel(r) WiFi Link 5100 AGN.

  Any comments?

  AIR-AP1141N-A-K9

  AIR-WLC2106-K9

  6.0.182.0

  Let me know if need more information?

  Thank you

  Correct, you do not want to bind to 2.4 GHz because there is not enough bandwidth for channel assignments appropriate. I didn't know it was a small deployment and with mixed aps. The client may simply be traveling between access points. I would like to do this, take your 802.11n client, plan floor in hand and go to define positions and mark down of your dB of signal and the PHY perforamnce rate.  Customers manage roaming. If they see a stronger signal to another access point that is part of your ESS they will choose to move to this another AP.

  It may be a case where the customer makes 802.11n AP to 1131 g AP.

  Regarding the WPA2/AES. Yes, if your clients support WPA2/AES. I want to disbale WPA/TKIP. No need for additional data in the tags. I saw in some cases this cause problems of customer...

• 802.11 wireless extend ac / 802.11n Base Stations

  Hello

  I tested the following wireless extend the installation program:

  (1) modem connects Airport Extreme 802.11ac running--> Wireless extends another Airpot extreme running 802.11ac

  (2) modem connects Airport Extreme 802.11ac--> wireless running extends an another old Time Capsule running 802.11n

  If I connect a device to the base station of second (an extensive wireless), I think that option 1 would give a better performance? Since that they are extended wireless with 802.11 ac. But after this test, it seems that the performance is similar in both configurations. It's supposed to be like that or there is an option I'm aware of that allows you to establish which wireless standard ask?

  Thank you very much.

  Found the similar thread that answers my question:

  https://discussions.Apple.com/thread/6521335?start=0&TSTART=0

  "TC and airports rank by the strength of the signal, no signal speed."

  Although they are not separate FAT portion, but I guess that my base stations connect via 802.11n channel after all.

• EA4500 - MBP problem 802.11n / 802. 11A

  Hi guys,.

  I use the EA4500 for almost a month now and I'm loving. Fast & stable, but I noticed a problem. My Macbook Pro does not connect via 802.11n but rather that it uses the 802. 11A.

  screencapture:

  

  I tried troubleshooting by using my other router Linksys WRTt310n and I noticed that my MBP is conencting for 802.11n.  So, basically, it is not a problem APPLE or MBP.

  Is there any setting that I need to check?

  Thank you much in advance.

  PARK

  Make sure that WMM is enabled in the router QoS tab.

• HP ENVY m6-1310sa Notebook PC cannot connect at 5 GHz although it has 802.11n?

  I recently had my broadband improved to 5 GHz 100 Mbps but my HP ENVY m6-1310sa can not detect the band of 5 G. I just want to know if he has the right network card to do this, my laptop computer supports 802.11n that should be, yet still cannot detect the 5 ghz, while my phone and tablet can detect it.

  Hello

  No, it supports only 2.4 GHz. The card is only a single band:

  http://h10032.www1.HP.com/CTG/manual/c03694820.PDF

  Kind regards.

• L530 with Centrino 6205 - 5 GHz 802.11n-compatible?

  I have L530 with Centrino Advanced - N 6205 built-in wireless. The computer does not see a network n I installation (2.4 GHz or 5 GHz). When I get the properties Advanced adapter centrino, mode 'Wireless' displays only the options of a/b/g and n not.

  6205 adapter is compatible with 802.11n? If so, how can I activate it? I have the latest drivers installed through Lenovo Thinkvantage tools app.

  Thank you.

  According to Intel, this is a map of "N" dual-band.

  See their recommendations on Setup here:

  http://www.Intel.com/support/wireless/sb/CS-030709.htm

  Two questions:

  (a) what type of encryption you have on the router?

  (b) are the other devices can connect with the router on the networks of "N"?

• Unable to connect 802.11n of 5423 Inspiron 14z

  Bought 14z 5423 as new year clearance stock. Running windows 7 sp1 and have updated from dw1703 to 9.2.0.512 device driver (last available for 5423 on windows 7). Can connect to the router 802.11 g more, but fails to connect with the access point (Belkin Surf N300) on 802.11n. There is no problem with access point can connect to several other devices including XPS L502x. have followed the advice of other positions, including the definition of power option of the wireless adapter for maximum Performance. Also all 802.11n bandwidth of 20 Mhz/40 Mhz automatic option. Symptom of problem: 1. The SID for an access point is displayed only after you restart the computer. 2. double click on the access point allows me to enter security key 3. After failing to connect, the SID for access point disappears from the list appreciate any assistance.

  Thanks for the quick response. I use Norton 360 first. I tried to disable the firewall, but still the SID for the Belkin access point only appears after a restart and fails to connect after you enter the security key. No problem with the billion router plus 802.11 g.

  After a few experiences, I realized that the dw1703 works on channels near 2.4 Ghz.  After I changed the access point to connect to channel 7, I can now see the SSID and connect without any problems.

• HP Pavilion HPE h8-1111: Deffective Network Connection (802.11n WLAN Broadcom adapter) - defective or software hardware

  I lost my network connection and I don't know where to go to fix it. If anyone has an idea where ho to continue, I have tried so many stage already that I am at a loss... Help

  My computer semi regularly acted by the loss of my internet on a whim. Basically, it can detect WIFI, no problem, shows the strongest signal for her also. just tells me that it cannot connect to WIFI when I try (even if he can ask me the password and can tell if I use one bad)

  I can't reprocude the question

  No significant changes to my computer because the issues started happening.

  Simple steps:

  -Recovery (before the first event) system does not alter

  -Router and modem are not the issue

  -Could you find not updated driver anywhere (even though this does not mean that they do not exist, but having only no internet with the pc makes it particularly tricky - also HP does not provide the )

  -Power management wasn't the question

  -J' tried forget network the many times this problem has occurred. He has not fixed it.

  Additional troubleshooting showed:

  -Reset the Winsock Catalog did not resolve the question more than once (emplying he did the first time I did).

  -Reset of TCP/IP, that does not solve the issue more far.

  My WIRELESS card is a Broadcom 802.11n

  Finally, the only thing that I can see (although I can easily miss something obvious) is my reinstallation of an old printer inkjet EPSON Workforce 545, which I am connected to my WIFI and my PC via USB (why I used wifi since I got cable?...) I do not know) a few days later, people who use the same network reported the act more as usual but I have not noticed anything on my end.

  -J' have been disconnected from the network to the printer and stopped using it.

  -J' found evidence of his feature wirless allgedly interfere with other devices here (search for entitled Review "bought two units for corn or work")

  http://www.CNET.com/products/Epson-workforce-545/user-reviews/

  -Usage guide also mentioned the possibility of non-zero of the interferingwith printer wireless (end of p.328) other devices:

  chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://files.support.epson.com/pdf/wf545_/wf545_ug.pdf

  Edit 12/04/2016

  I ended up having to do a factory reset on my computer for unrelated reasons. To reconnect the original WLAN card, I don't have to use the USB adapter that I bought to solve my problem.

  Factory reset works if fails everything else! Solution without after all!

  Hiya

  Well I'm really ideas, I have revised the HOW2 and he is shown below, just in case it helps.

  

• Satellite R630-144 with Broadcom 802.11n only with 65 Mbps

  Hello
  This is my first post here - just got a satellite R630-144 and after complete installation, I tried to start inet via broadcom 802.11n adapter (which is a NVR).
  The connection is stable - unfortunately only with max 65 Mbps. cannot find any point in the settings that allows to increase the bandwidth up to more than 100 Mbps.
  Can anyone help?
  If there is no option to improve - anyone know how to change the map - Broadcom or how to open the bottom of the Satellite R630-144.

  Thanks for the replies

  pemaltcl

  Maybe you should check the WLAN driver version first and install the most recent version of the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Please post comments.