810-145qe want: How do in BIOS

Similar Questions

• I want to update my bios dimension 4550 to enable me use a bigger HD if it's possible can someone teach me how to go to that topic.

  Can I upgrade from 4550 dimension bios and how

  I want to update my bios dimension 4550 to enable me use a bigger HD if it's possible can someone teach me how to go to that topic. The current version of bios is A01

  Go here:

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?DriverID=R67246&FILEID=2731129938&ProductCode=dimension-4550&urlProductCode=false

  There are three choices; the first requires a bootable floppy, the third will create a set of boot floppies, and the second is a "floppy" setup that flashes the BIOS from Windows.

  Be forewarned: if it screws up during the update because of a loss of power or fault, you basically turn your PC into a paperweight. Flash BIOS that went wrong is sometimes very difficult to recover from and sometimes impossible.

  SC Tom

• Portege 3410 - how to update BIOS and install XP?

  Hello, I have two questions on Portege 3410.

  First: I can't update the BIOS (current usage, 1.50 there, I want to update to 1.60). Instruction does not work: I connect Teac USB into USB port, turn on the USB - FDD emulation to activate, portable switch with pressed F12, the message «Ready to update BIOS...» "appears, I touch in a hurry, but nothing happened. What's wrong?

  The other: I can't install Windows XP on laptop (it does not start from USB disk or external USB DVD drive).
  How can I install Windows?

  Thank you.
  Mikhail

  Hello

  Just a question: why do you want to update the BIOS? Is this really necessary?
  I ask this question because this update is always somewhat risky and you might damage it ROM module
  In any case, have you tried to load the default settings in the BIOS before you start the update and install XP?

  You can install XP without CD. Therefore, you must copy the folder i386 on the HARD drive from another computer and the boot to the HARD drive files, I think you need a little search with Google to find a workaround for this. You should find enough! ;)

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• HP Compaq 610 ((Intel PVU): how to downgrade bios on Compaq 610?)

  How downgrade the bios on Compaq 610? I got bios ver. F.20

  I want BIOS version f.08!

  

• Satellite U305-S2808: how to remove BIOS password

  OK, I went to best buy for a simple upgrade and the completely * ed my laptop.
  When I approached them about this they said that it was normal procedure.
  They have everything reset.

  So I called Toshiba asking how to reset the Bios password and they said I had to go back to bestbuy and they could help me.
  So now I am back to bestbuy and explained in the simple upgrade they reset all my passwords and the scanner ingure won t read my finger to leave me in the stinking Windows and my password Bios changed also.

  They told me that I would have to pay to get this fix because I opted out of it the first time. chosen?
  My passwords should not have been affected.

  So now they want a 125 smackers to reset or turn it off.
  So I request someone knows in a way that they would reset it?
  They said they could do it, while I waited and got the school Tuesday morning.
  So I need to know how to bypass or reset it as soon as possible.

  Please any help would be appreciated!

  the model is - Toshiba Satellite U305-S2808

  Hello

  Your story is a bit confusing.

  But let's talk about facts;
  Firstly if you have set the BIOS password, you should be able to remove it in the BIOS if the BIOS password is known to you.

  If the BIOS password is not known to you, you will not be able to withdraw without further support from the authorized Toshiba maintainer. The BIOS password must be removed using a special procedure and tools and it can be done ONLY by an ASP.
  I think it should be clear now.

  So if you want to remove the BIOS password, and the password is not known to you, you need the ASP and you will be charged for this.

  Unfortunately, you will need the help of ASP.

  Welcome them

• Tecra 740 cdt - how to access BIOS?

  Hello
  I have an old Tecra 740 cdt no hard drive and a hard drive empty.
  I wonder how to access BIOS so I could change the boot priority to boot from a bootable CD.
  Navigating on this forum I found a few keystrokes as F2, F8 and so on, but it did not work for me.
  Can anyone help?

  TIA

  Have you tried to click on the ESC then F1 immediately after switching on the laptop?
  As far as I know it should work on all laptops with BIOS Toshiba

• Upgrade Windows 7 to 8.1 Pro for HP Envy 810 - 145qe (J0X43AAR #ABA)

  I just bought a HP Envy Phoenix 810-145qe which is preinstalled with Windows 7.  Specifically, I bought this system because it was faster than my old desktop processor and I could spend 24 GB memory to 32 gb that I did.

  I went to the HP site and checked if this model has been tested by HP that came back had not been tested with Windows Pro 8.1.  Can someone tell me if I've stuck with Windows 7 on this new machine?  I really need to have Windows Pro 8.1 because I develop e-Learning programs that need to be tested in an environment Windows OS 8.1. Please notify.

  Hello

  I don't see a problem with the installation of Windows Pro 8.1 on the 810-145 envy.  HP has released drivers for Windows 8.1. There is little difference between Windows 8.1 and Windows Pro 8.1.

  1. Check with the manufacturers of your application to make sure that you don't have a problem with Windows 8.1
  2. Run Microsoft Windows 8 upgrade assistant
  3. Don't forget to create the external HP recovery media.
  4. Back up your data and also download drivers HP Windows 8.1 posted on external media.
  5. Buy licensed Windows 8.1 and download Microsoft support.  The Microsoft download process will allow you to create a bootable USB flash drive or an optical medium.  I would recommend that you download the ISO support and then create the desired boot media.
  6. Follow these instructions from Microsoftto install Windows 8.1.

• Satellite A200 (PSAE6) - I want to downgrade the BIOS

  Hello and sorry for my bad English (I'm french nobody's perfect ^^)

  I want to downgrade BIOS because since I install 2.6 on Vista 64, I have a lot of freeze (PC freeze 30 seconds each about 5 minutes). After updating the BIOS, I don't have this problem.

  So if you know where I can download version 2.5 or 2.4 BIOS, you save me the life.

  Thank you very much and excuse my English again.

  Hello

  > After update BIOS, I don't have this problem.
  And why you want to downgrade the BIOS?
  Sorry, but it's a little confusing.

  Anyway, a BIOS upgrade peut t be done. As far as I know that this can only be done from an authorized service provider.
  Contact the nearest, explain the situation and technicians will help you.

  Welcome them

• confused about the want 700-074 update bios - it's for my computer?

  Hi all

  I am a happy owner of a 700-074 HP Envy computer. I have a question about a recent update BIOS I've seen on the software and drivers download page on the main site HP.COM. I frequently check the site for updates of drivers and software.

  The update in question is classified

  Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  Although the ROMA family corresponds to the family on my computer, it lists the update of a HP Compaq computer.

  This BIOS does the 700-074 want system specifically? I guess it's because it it lists to the title of the download page for 700-074 want systems. However, I don't want to patch my BIOS with the update incorrect if it is considered an error.

  Any help will be appreciated.  Thank you!

  Hello @boinc127,

  I understand that you are looking to confirm that the update of the BIOS HP Compaq consumer Desktop PC BIOS Update (2AF3 ROM family SSID) is appropriate for your computer. As far as I can tell it's the update of the correct BIOS for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• How can reset BIOS Configuration hp Compaq nx 6110

  How can reset BIOS Configuration hp Compaq nx 6110

  Please tell me

• How Flash the BIOS on Aspire S3-391 when no present OS?

  I have a new Acer Aspire Ultrabook S3-391-6862.  I want to update the BIOS on the unit, but has difficulty because there is no OS on the Ultrabook again (it came with Win8 on it but I wiped the HARD drive to put Win7 on it).  I downloaded the latest BIOS (BIOS_Acer_2.17_A_A.zip) and unpacked.  It contains 2 files:
  (1) HB2V217.exe (size = 4, 664, 003 bytes)
  (2) Readme.txt (this simply says "Windows flash: Please click on 'HB2V217.exe' to update the bios").

  I then added this "HB2V217.exe" (4 664 003 bytes) the Win7 DVD (I did a DVD ISO, then adds the "HB2V217.exe" of the ISO file, then burned a new DVD of Win7 from this new ISO standard).
  The new DVD of Win7 boots fine, date at which I hit 'SHIFT - F10' to a command prompt, navigate to the "HB2V217.exe" file and run it, date at which it gives me a message error "subsystem required to support the image is not present.

  Other misc notes:
  -If I look inside the "HB2V217.exe" (4 664 003 bytes) with 7Zip, it contains 4 files:
  (1) HB2V217.exe (size = 4564828, but it has the same name, as it is the container for HB2V217.exe 4 664 003 bytes).
  (2) PopMsg.exe
  (3) wFlash.bat
  (4) wFlash.exe

  Obvious questions:
  -Should I copy the 4 files for installing Win7 disc rather than their container?
  -Can you tell me what I am doing wrong?

  Thank you

  Thank you for your help Jean Philippe, although I have now solved the problem, though in a different way.
  To answer your question though, the latest version of BIOS was 2.09.

  My solution was tedious but I downloaded "WinPE", built a flash drive bootable with it, the file copied BIOS "HB2V217.exe" (version 4 664 003 bytes) in the flash drive, booted from the flash player, sailed to "HB2V217.exe" and run it, date on which she flashed BIOS 2.17 new to the Ultrabook and rebooted, and success.

  For anyone who has the same problem, it was my convoluted solution (in a manner of long-term assuming that those who read it are not familiar with some aspects of computers).
  -on another computer, I did the following:
  (1) - download Windows ADK ("adksetup.exe"), which is free (http://www.microsoft.com/en-us/download/details.aspx?id=30652).
  2-) plugged a USB key (something more bigger than 200 MB is fine).
  (3) - open windows explore and noted the drive letter of the USB Flash drive, I just plugged.
  (4) - ran the "adksetup.exe" and chose only "Windows PE" of all it's features (I forget if I run 'adksetup.exe' once or twice, but have downloaded more than 3 GB of files in total.
  (5) ' adksetup.exe' run and got a box of command prompt.  I typed in this box (but without the quotation marks):
  (6) "copype x 86 C:\WinPE_x86" (I chose 32 bit (x 86) version, although it may either have worked). "
  7-) after he finished I typed ' MakeWinPEMedia/UFD C:\WinPE_x86 E:.
  (8-) where "E:" is the letter of your Flash drive you noted in step 3.
  -NOTE that it will erase and format your USB Flash drive, so be sure you don't have any data you want to keep on it and make sure that you have given the CORRECT DRIVE LETTER or YOU WILL FORMAT AND LOSE DATA ON a DRIVE OTHER!
  9-) copied the "HB2V217.exe" file for BIOS I unzipped from the zip file, I had downloaded from Acer, for the flash to the root drive.
  10-) moved the to the Ultrabook of Acer and started the Ultrabook USB Flash drive (after setting it's BIOS to boot from the USB ports).
  (11) - target navigation on drive "C:" of the Ultrabook in this is the command line by typing:
  (12)-"c:".
  (13)-"HB2V217.exe".
  (14): the Ultrabook of Acer seems to restart twice because it flashes the BIOS and gives you a course.
  15-) after it's all done, restart the Ultrabook and enter the BIOS to check the version of your BIOS is now new and correct.

  There is probably an easier way to make a bootable stick with Windows on it, but nothing I tried seemed to work, so I was stuck with this complicated scheme.

  It would have been nicer if Acer had provided their BIOS image independent bootable OS as do so many other manufacturers, so you could simply image/burn the image to a floppy or CD/DVD and then Flash bootable BIOS boot media.

  In any case, thanks for your help, and maybe it helps others as well.

• How do my bios set up in hp pavilion dv4 panoramas

  How do my bios set up in hp pavilion dv4 panoramas? Thank you

  Hello

  to power on you will see at the bottom of the screen a way to enter the configuration menu boot command or bios

  It would be F2 or delete etc to enter the bios setup

  Contact HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  or ask in the forums to Support HP

  http://h30434.www3.HP.com/

• HOW REMOLVE A BIOS PASSWORD

  HOW REOLVE A BIOS PASSWORD

  How remolve a bios password on a
  product: compaq mini 110
  p/n: VM146UA #ABA

• I want how to use custom, actions, brushes ets...

  I want how to use custom, actions, brushes ets...

  I put the files here...

  C:\Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets

  When I load model and ets...
  There is nothing in the record...

  What should you do?

  I use Photoshop cc 2015...

  and workign in Photoshop cs6.

  You will need to put the diagrams in the subfolder of the boss, actions in the action etc subfolder.  I thought you just need to know the path to the CC 2015 presets in general.

  Here's my presets folder and all subfolders